outlook 2007 not closing #2
Outlook 2007 connecting to exchange 2003 on SBS2003.
When I close outlook it shuts properly, until I set it to empty the
deleted items on exit.
Then when i close it, the old dialogue box 'are you sure' seems to pop
up for an instant, disappear, and I am left with outlook still. Hit
close again and it closes.
...Closing CRM activities
I would really appreciate it if anyone can help me to close CRM activities
(Tasks in particular). I am using C# code to create an activity and I am
trying to use the statecode and statuscode fields to save the activity as
closed. my code is below
createReq.Target = task;
CreateResponse createRes = (CreateResponse)service.Execute(createReq);
SetStateTaskRequest sstr = new SetStateTaskRequest();
sstr.EntityId = createRes.id;
sstr.TaskStatus = 4;
sstr.TaskState = TaskState.Completed;
=(SetStateTaskResponse)service.Execute(s...Unable to save macros in word 2007
The word environment is setup to share macros using the normal.dotm located
in a shared drive.
This is configued in WordOptions.Advanced.FileLocations.UserTemplates
However, a recorded macro will not save in normal.dotm or in the current
For instance, a simple standard process to illustrate the problem is to Open
a blank document. Use "Record Macro" from the Developer tab. The macro is
named in the popup and Document1 is selected from the "Store Macro in"
pulldown. Click Ok. Write a few letters. Use "Stop Recording". Save the
docum...INserting Word Docs into E mail Outlook 2007
Want to be able to ijsert a formatted Word into the body of an E mail.
...exchange 2007 assign email address to public folder
how can I assign email address to public folder in Exchange 2007 ? I can't
found shell command for this and Exchange 2003 management console always
stop with error when I try get properties for any public folder.
On Mon, 19 Mar 2007 11:29:00 +0100, "HoGo FoGo" <email@example.com> wrote:
>how can I assign email address to public folder in Exchange 2007 ? I can't
>found shell command for this and Exchange 2003 management console always
>stop with error when I try get properties for any public folder.
"How to Mail-En...Sounds in Excel and Word
Hi. I am new here so apols if this is a common question.
I have just installed Office Suite 2000 on my new Vista computer and noticed
that I get an annoying beep whenever I go to File / Open and click on a file
or folder name. It never happened with the same software which I have kept
through Windows 98SE and Windows XP so I assume it is a Vista peculiarity.
Naturally I went straight to Sounds in Control Panel but the sound was not
on the list.
How do I turn it off, without disabling all Windows sounds?
...viso 2007 on office 2003
I am using Office 2003. Can I use Visio 2007? I want to download a trial
version and buy it if I like it; otherwise, can I download a trial of Viso
2003 and then buy it if I like it.
On Mon, 6 Jul 2009 10:30:01 -0700, FredG
>I am using Office 2003. Can I use Visio 2007? I want to download a trial
>version and buy it if I like it; otherwise, can I download a trial of Viso
>2003 and then buy it if I like it.
As far as I know, yes, Visio 2007 is independent of the version of
Office (at least, as far as every day usage goes)....Hyperlink to specific point in word doc
I am trying to link to a specific location in a word doc from Excel.
Can I add something to the hyperlink to find a string of text in the
word doc. Or run a macro, open the word doc and then search for a
string of interest?, etc?? Suggestions?
If you insert a bookmark in your MSWord file:
Both of these worked ok for me:
> I am trying to link to a specific location in a word doc from Excel.
>...exchange 2007 install missing C:\Windows\system32\ldifde.exe on DC error ?
The system cannot find the file specified
An unexpected error has occurred and debug information is being generated:
The system cannot find the file specified
ExchangeSetup log shows:
[14/01/2010 09:16:39]  Beginning processing.
[14/01/2010 09:16:39]  Running <C:\Windows\system32\ldifde.exe> with
arguments <-i -s "DCserver.DOMAIN.COM" -f
"C:\Users\ADMINISTRA...Setting recordsource property in VBA Access 2007
I'm trying to create a report in Access 2007. I cannot figure out how to set
the recordsource propery in code.
I either get #Name? if the property is not set at design or I get the
original dataset base on the value of recordsource at designed, not the value
that I set in the report_Open event.
Does anyone know what I need to do to be able to set the recordsource
property in code?
>I'm trying to create a report in Access 2007. I cannot figure out how to set
>the recordsource propery in code.
>I either get #Name?...4 postcards per page in publisher 2007
For years I have been creating 4-up two sided postcards with Publisher 2003.
I cannot find a way to do this. Mary Sauer answered a question that helped
somewhat, using Avery 3263 but I cannot get it to duplex or switch to
landscape. I think this is a big disadvantage to the new release. Can anyone
Can you setup your printer for landscape? Usually Publisher will go along with
the printer setup.
If you are merging you will not have a duplex option or if you do there maybe a
message about too many pages.
Is your printer driver current? I have no problems with setting up po...Exchange 2007 message routing
I have a new Exchange 2007 Organization. 1 HT-CA and 1 MB Server in
one location, same AD site. In another location I have a single HT,
CA, MB server, in another AD site. All one single .local domain and
single .com smtp address.
I can send message between users on the same server in both locations
but not between the two locations. They just go into the pending
state in the queue manager.
I can telnet to port 25 on each HT to the other HT.
I am sure I am not setting up something proper to allow the two to
send messages back and forth.
If userA has a mailbox in SiteA and userB have a m...chapter 5 SBS book 2007
ignore last question. I can select timeline, but the export to Project won't
happen, and the Import won't happen for this file. Is it because I have the
trail version of Visio 2007?
Do you have Project Pro installed on the machine as well?
Product Support - Visio
[This posting is provided "As Is" with no warranties, and confers no
ignore last question. I can select timeline, but the export to Project
happe...where did the tools menu go for excell 2007?
I cannot find the tools menu for excell 2007.
There is no Tools menu in Excel 2007. All of those commands have been
See if this helps:
Microsoft Excel MVP
"Terry" <Terry@discussions.microsoft.com> wrote in message
>I cannot find the tools menu for excell 2007.
Many of the commands are under File (Office Button), Excel Options ...
"Terry" <Terry@discussions.microsoft.com> wrote ...general question re classic view for Outlook 2007
In trying to sort out an issue I have with another program, the tech
mentioned to me that I had the 'classic' Outlook 2007 look though my Word
has the '2007' new look.
I bought and installed Microsoft Office Outlook 2007 (12.0.6316.5000) SP1
MSO (12.0.6320.5000) Part of Microsoft Office Enterprise 2007.
Can I install the 2007 new look ... or is it with my 'Enterprise' version
Thanks, Dave Horne
"Dave Horne" <firstname.lastname@example.org> wrote in message
> In trying to sort out an issue I hav...Windows Explorer problems with Office 2007 documents (read only)
Some Office 2007 Documents [compatibilty Mode] Opens as 'Read Only'
Rename + Saving not allowed -"already open in other application"
Checked document properties -Read Only NOT set
Closing and re-opening Windows Explorer sometimes works, other times Laptop
must be restared, Explorer re-opened, then the Document can be Renamed,
Deleted, Saved, Moved or Opens OK - sometimes
If I save as a differnt name = OK, but to delete the old file I have to
re-start Explorer or the PC -very frustrating as this doesn't always work
If I use another File Manager (Paper ...Macro from 2003 to 2007
I set up several macros on a number of buttons in XL2003, works fine, within
a workbook. Part of the function is to creat a copy of a couple of tabs in
another workbook, which is smaller and easier to e-mail.
However in 2007, once a macro has run, the button(s) then refer to the
macro(s) as if it was in the new workbook, when this patently is not the case.
Getting to wits end
...arabic date (um alQura) wrong date display in outlook 2007
when ever i change from control panel ,regional and langauge the date formate
from english to arabic (um alQura it display wronge date in outlook calender.
Since I cannot log in as an administrator to get QuickBooks Premier 2007 to
sync with RMS 2.0, I created a Standard User Account.
I can now sync the two programs together.
The issue that I am running into is that I need to re-sync all of my data
from March of last year to the present. I can sync from March 2007 to Today.
But anything previous to that, I get a Permission Denied error.
Any Idea why?
...Importing Reports From 2000 ADP to 2007 ADP
Im trying to import reports from 2000 adp to 2007 adp and i'm having some
strange problems. The reports import fine and all the vba code is still
there but it I alter any part of the report and attempt to save it it say ok
saved, but when I try to close the report it says do you want to save your
changes, and if you say yes it asks you again and again...... It will not
save the changes.
I have created new reports in 2007 adp and they save fine just has problems
with imported reports, is there some thing I need to set to allow me to
change the report.
He...Adding a URL to all of my APA citations in word 2007
In word 2007 in the Manage Sources option, I have typed in the info for APA
citations and put the URL into the comment block for each source. However,
the automatic citation doesn't include the URL (comment) when the
bibliography is automatically generated. I know I can manually type in the
URL after the respective bibliography heading, but if that is ever updated or
slightly changed, the URL is deleted and not updated.
Is there an option or way to edit APA citations as a "user template" so that
I can add in the comment box (URL) into the auto generated bibliog...Word Table saved as ActiveX in Access, how to display in Word
I use Word and Access 2007 with a mail-merge OLE DB connection
that works well with the linking of text fields, etc. (type customer and
My problem is that I need to link into a formatted Word table stored in data
type, ActiveX, Access to my Word document.
When I try it says only "151C2E00" in the field, where the table would appear
Someone who has solution!
ActiveDocument.MailMerge.OpenDataSource Name:= _
"\\vmware-host\Shared Folders\My Documents\Mina datakällor\Foto.
, ConfirmConversions:=F...Microsoft Money 2007 HB unable to open /Install
I am getting following massage" Unable to Initialize a requested Money
"Windows cannot find... checksku.exe.... install from original disk"
I am not able to reinstall either...
> Any MVP , Any one !!!
> "green" wrote:
> > I am getting following massage" Unable to Initialize a requested Money
> > components. Please
> > Then,
> > "Windows cannot find... checksku.exe.... install from original disk"
> > I ...Word doc to Excel
How do I insert a word doc in an excel work book
Go to Insert>Object. If you want to create & insert a new Word doc (stored
only in the workbook), choose Microsoft Word Document on the Create New page.
To link to or insert a copy of an existing doc go to the Create from File
page and click the Browse button to locate the doc to be inserted.
The doc will display as an object that "floats" on the surface of your
worksheet, not as cell content, so you can resize it as necessary. To edit
the content, double-click the doc object.
Hope this is useful |:>)
"hopeless&...Word VBA String functions
I'm looking for a function that can parse a string in Word VBA. Specifically
I want to break a directory path into separate parts so that I can create the
directories/subdirectories. I couldn't find one in Word but I know the Find
function in Excel can do this.
1. Can I use an Excel function in Word VBA? (I believe I may have done this
sometime in the past but can't recall how.)
2. Does anyone know of a better function/method to parse within Word, or can
you suggest a different/better approach?
You can use the Split function - eg