Outlook doesnt prompt to work online/offline
MS doesnt always prompt to work online/offline when
opening outlook. The problem is that it might give u the
option the 1st time you open outlook, but the 2nd and 3rd
time it will not prompt you, it will just open outlook
I have disconneted the pda/pocket pc from the computer to
make sure that it was not keeping a link between the two.
I have closed outlook and killed the Outlook.exe that was
running, but it still wont give the option.
Anyone had this problem?
...SUMPRODUCT Works Sometimes Why
I have use this formula before, but i try it again on another sheet and now
it does not work.
This does not:
> it does not work.
"Mestrella31" <email@example.com> wrote in message
> I have us...How to stop access confirmation in Outlook
When I try to sync my PDA/Phone with Outlook (2000) it ask for me to allow
access for 'x' number of munites.
How do I stop this request?
Try updating your PDA sync software. (If the PDA uses Activesync, upgrade to
And if you are curious to know how/why you are getting the prompt, see the
Neo [MVP Outlook]
Due to the Swen virus, all e-mails sent to this account will be deleted
"Clive" <someone@NOTHANKS.com> wrote i...Does ? work under excel search?
Wondering if there is any way to search/find the ? inside of a cell? It
does not work for me unless the ? is by itself in a cell. I need to dig out
this symbole from within a cell. For example, cells may have "abc?123" in
it and I need to find and delte it.
Is it feasible?
in the find what box type
in the replace with box leave blank
click on options and ensure that match entire cell contents is not checked
run the replace
"harry" <firstname.lastname@example.org> wrote in message
&g...SetWindowPos ZOrder does not work with overlapping controls?
I have a problem with the ZOrder of SetWindowPos. In my CDialog, I use a
bitmap CStatic to display a background picture. On that, I want to show some
controls. I do it as follows:
m_stcBackgroundPic.SetWindowPos(&wndBottom, 0,0,1024,496, SWP_HIDEWINDOW);
m_btnDoSomething.SetWindowPos(&wndTop, 10,10,100,60, SWP_HIDEWINDOW);
m_stcEditCaption.SetWindowPos(&wndTop, 10,175,150,30, SWP_HIDEWINDOW);
m_ctlEdit.SetWindowPos(&wndTop, 170,175,170,30, SWP_HIDEWINDOW);
Later, I show the controls with ShowWindow in the same order as above (first
the background pic, then the butt...How to stop Pie Chart from using N/A# for values
I have 2 columns: Column 1 is customer name. Column 2 is sales for the
If a customer had no sales for the period the sales column will either be
N/A# or zero. When I plot in a pie chart, I only want to show customers who
had sales for that period.
Is there a way to only plot those customers with sales without having to
change the range and sort every period?
The pie chart data labels show the customer regardless of sales and if I
blank out the customer, the value data label s...Rules only work when I first start Outlook 2003
Hi all. I have a problem with my rules in Outlook 2003.
I've upgraded from OL XP, and now my rules only seem to work when I first
start up OL 2003 and it checks my mail.
I'm using several POP accounts and I want the mails moved to specific
folders depending on the mail account they come in on. The rules worked fine
when I was running OL XP, but now they only run on the first mail check as
soon as I open OL. Any subsequent mail checks, either automatic (every 5
mins) or manual just sends any new mail to the Inbox.
I have read about an OL prob where the rules don't work on the fir...Accessing Spreadsheet Documents (Works Suite 2003)
I recently converted over from a Mac to Windows. I had
several spreadsheet documents that I converted using
Maclink. They converted over okay. But, when I try to
use them, and then wanted to save them, I have to save in
Works 7.0. Then when I try to open them up I get the
following type message: BUW1, contains a formula
reference outside the area that Works can access. There
are other similiar references like: LDI1, KMS1, AND
MX1. I do not know how to remove these problems so that
I may utilize the documents. Please help. Thanks. JB
I'd suggest asking this in a Works gr...work 04-30-07
On August 1, 1996, Michael Johnson electrified the world by winning an
Olympic gold medal in the 200-meter dash with a time of 19.32, shattering
his own world record and capping one of the greatest individual track and
field performances in Olympic history. Johnson became the first person in
history to win both the 200 meters and 400 meters in the same Olympic Games.
These performances in front of an American audience highlight a decorated
career for Johnson, who will be competing in his third Goodwill Games in
1998. Some of Johnsons accomplishments include:
� W...HELP: Deleted Items Limit Set to 0 days does not work!
I've set the Deleted Items Limit to 0 days from the Deletion Setting at the
Mail store level but when i delete an item from one of the mailbox it does
not removed from the server immediately.
Has anyone come accross this issue? Please advice.
Thanks in advance
On Wed, 2 Feb 2005 20:20:23 +0800, "hanafiah" <email@example.com>
>I've set the Deleted Items Limit to 0 days from the Deletion Setting at the
>Mail store level but when i delete an item from one of the mailbox it does
>not removed from the server immediat...IInternetProtocol Start Method not working correctly
I've been searching and searching and found nothing to help me out.
Here's my situation: I need to capture URL Requests (clicks or
address bar entries) and if it matches a specific URL like
"http://somedomain.com/blorg.exe" I want to be able to intercept that
and tell IE i'll take care of it myself, OR, if it does not pass my
criteria, let IE handle the click. I DO NOT want to register my own
protocol like mark://somedomain.com/.... I need to be able to look at
the whole URL
This is what I've done so far:
I have created a namespacehandler in the HKCR are...AutoSummarize not work
I try to access the autosummarize tool box but always I have no dialog box
appear. I coudn't do work it . please tell me what shall i do?
Are you using Word 2007? It seems as if the feature is no longer supported in
that version. Although you can add the AutoSummary Tools command to the Quick
Access Toolbar, nothing happens when you click AutoSummary Tools | Auto
Microsoft Word MVP
(Message posted via NNTP)
"Moataz" <Moataz@discussions.microsoft.com> wrote in message
news:13E5455D-1AA0-4B32-AAFB-6F70E67D99B6@microsoft.com...Help working out hourly production rates in spreadsheet please.
Stuck on this one now. In my spreadsheet i have 3 columns that contain the
following info for my production machines
Total shift time (this will usually be 7:45 or 8:30 - formatted in hh:mm
Downtime per shift (any value upto max shift time - formatted in hh:mm
I would like to keep the time in hh:mm format as i do further calculations
on these - % downtime, total downtime, total shift hours etc (and also cos
it took be ages to figure out how to add up in time and i couldn't believe
how simple it was when i figured it out)
What i would like to be abl...How do I set the size of a chart in excel (without using the mous.
How do I set the size of a chart in excel (without using the mouse)?
You can set the size programmatically:
.Width = 300
.Height = 200
> How do I set the size of a chart in excel (without using the mouse)?
Excel FAQ, Tips & Book List
If you hold the shift key whilst selecting the chart you can move with
the cursor keys. CTRL+1 will display the format dialog which will allow
you to alter the height and width.
Only thing is I don't know how to select t...Advanced Find doesn't work
After having updated my Office 2000 version with service
release 1a and service pack 3 the Outlook 2000 advanced
find function no longer works. It doesn't deliver any
results and pretends to continue searching forever. Anyone
any ideas about this problem?
Same problem here....except it doesnt seem to keep searching. It will only
find something within the last day or so.
"Steve Kraft" <firstname.lastname@example.org> wrote in message
> After having updated my Office 2000 version with service
> rele...Chart Wizard won't work
I have classwork to perfoerm on EXCEL, but I am unable to use the Chart
Wizard because it is grayed out, and unavailable. I have made certain that I
have selected ranges with data in them, so what do I do next???
Perhaps it's not installed? Some versions of MS Office do not install the
wizards when the default install method is used. Use Custom install, and
choose "Run all from my computer".
"peg2unic" <email@example.com> wrote in message
news:255A90EF-B896-48EF-86DC-5988EEC707C1@microsoft.com....Landscape orientation doesn't work
I've checked my page and printer settings but I can't seem
to print in landscape (ideally, landscape legal size).
I've also posted this in 'worksheet f(x)'.
Can anyone assist?
p.s. I've even repaired/re-installed with my office 2000
CD but problem persists.
Did you also check File>Page Setup>Page, orientation?
Microsoft MVP - Excel
"Gerry Simone" <firstname.lastname@example.org> wrote in message
> I've checked my page and printer settings but I can...inserting equations in Word document from MathType not working anymore
Operating System: Mac OS X 10.6 (Snow Leopard)
I've just starting using Snow Leopard after worked with Tiger previously. I'm noticing some odd behavior that's different than before. <br><br>I have the MathType 6 Insert Eqn button installed in Office 2008 for Mac. When I click on that, MathType opens. So far, so good. I type in my equation, but, when I'm finished editing or creating my equation, I'm used to clicking on the red button to close the MathType window and return to my Word document. When I do that now, my Word d...How to I stop the form from resetting
I have a table linked to the header of my form. The table has for records.
Here's what happens. When I choose a record (say record 3) record 1 ALWAYS
The form is meant to be printed out.
Can someon please tell me how I can get the record I choose to print out?
Thanks in advance!! :o)
Although it is possible to print a form, it is not advised. You will get
better results if you create a report and print the report.
Dave Hargis, Microsoft Access MVP
"Printing only filtered data in a form" wrote:
> I have a table linked to the header of my form. The table h...RPC stopped working
I was working from home last Monday and I was connected to my Exchange server
using RPC over HTTPS.
I am in Windows 7 64bit and Outlook 2003.
When I try to log back into the RPC connection now, it keeps prompting me
for my password over and over again and never lets me in. It was working
find and now it has just stopped.
Does anyone have any ideas about how I can fix this?
Where does the boss's new router fit into the timeline? (I assume it's a new
router at home, not in the Exchange network). If you both were affected at
about the same time, its more likely an is...How to stop calculating CPP when employee turns to 65 years of age
I am using Canadian Payroll in GP 10, one of my employee who turned to 65
years of old, subject to Canada regulation, he does not need to contribute
CPP. How can I configure Canadian Payroll to calculate CPP under this
employee, today; I have to remove the calculated amount manuall when I ran
pay roll each time. The date of birth of the employee has been entered in
I assume the Canadian Payroll is similar to that of the US in the sense that
you have benefits and deductions. Canada Pension Plan (CPP) is a deduction
that is (must be) associated to an empl...How to stop spam?
I am an administrator of an Exchange 2003 server in a 2000
domain. I have applied the "Inetlligent Mail Filter" from
microsoft (which is a free download).
It does catch some spam but we are still getting spam to
the heavy e-mail users.
We are also nonprofit so there is little to no money for
an expensive solution.
Can anyone give me some suggestions as far as network
(firewall) configuration and maybe some less expensive but
good for the money solutions to stop spam?
Try using SpamByes it can be downloaded from
>-----Original Message...Outlook2000-How can I stop the Message "A pgm is trying to"
In Outlook 2000, How can I stop the message "A program is trying to
automatically send email on your behalf. Do you want to allow this?"
What Outlook setting do I need to change?
I know how to stop it in Outlook Express"
Dennis Rose wrote:
> In Outlook 2000, How can I stop the message "A program is trying to
> automatically send email on your behalf. Do you want to allow this?"
> What Outlook setting do I need to change?
> I know how to stop it in Outlook Express"
Do you even know what pro...how do i work out what price to charge
i am a nail technician, and would like help with working out what i spend
every month( on supplies e.g nails, nail polish , nail polish remover, fuel(
car) , etc etc ), then be able to have a total figure at the end where i
charge for a certain job, i.e french nails $30... by being able to work out
how much im spending a month, compared to how much im earning... i'll soon
realise whether or not im under charging myself
look forward to your response
Good questions. You could start with a simple table, say with 5
columns: Date, Category, Description, Expense, Revenue....Office Notifications no longer work
Sometime in the last month, my Office notifications have stopped working.
The Microsoft Office Notifications application is running and I have made
sure that it launches at startup, but that hasn't helped the problem. I have
repaired permissions since this problem began and have run both Norton Disk
Doctor and Alsoft DiskWarrior as part of my regular routine, not
specifically for this problem. Again, no effect toward the problem.
I am running a dual 1.8 GHz G5 with OS 10.3.9. Office 2004 (Entourage v
11.1.0 (040913)). Any suggestions to fix this?
I think you're mor...