Memory allocation is too slow81173 (6/29/2010 10:17:59 PM) AlexMemory allocation in our application is too slow, on average every new
malloc or 'new' is costing us about 3 to 4 milliseconds, which is a
huge hit to the performance, each 'new' is only allocating a few byte...
Trying to create a platform for AMD SC520 board31536 (7/1/2010 8:07:58 PM) UtfPlease Help!!!!!
I have an AMD SC520 Single Board computer with an Intel 82559 Ethernet
controller, 4 serial ports and an IDE port. I am trying to build a headless
system with Windows CE 5.0.
SQL 3.5 SP2 into slot 12964 (6/30/2010 12:10:14 PM) DanLHi all,
Does anyone know how to get SQL 3.5 SP2 dlls to load into slot 1?
Some detail - I can't find any QFE for this, only a .cab
installationm so I've taken the files out and manually added them to
WinCE 6.00 and platform.dat31522 (7/1/2010 1:30:52 PM) FabriceHi all,
I'm working on a WinCE 6.00 BSP which includes Qt libraries.
So I have build the Qt libraries for my platform and I have add the Dll
into my BSP.
I have to place some dlls in specific directories t...
UART with DMA implementation problem...21095 (7/1/2010 4:53:02 AM) MikeDear All,
Recently I implemented UART Rx with DMA. There is small difference in
code like DataReplaced, GetLineStatus has been removed as these
function check per byte. In case of Rx - DMA, it will transfe...
ClosaHandle() hangs for a long time22469 (7/1/2010 4:56:17 PM) UtfHi all
I'm using WinCE 6.0 and experiencing troubles with writing files to the disk
(both SD card and NAND flash).
CreateFile() and WriteFile() work fine, but when I call CloseHandle() it
VirtualFreeEx fails on not-page-aligned addresses21697 (4/19/2010 5:44:01 PM) UtfHi,
VirtualFreeEx fails on an address returned by VirtualAllocCopyEx, when this
address is not page-aligned.
One of my devices has small BAR of 1KB. This bar is allocated on a
non-4k-page boundary on ...
Cellcore / Odd SIM Issue0991 (7/1/2010 5:21:39 PM) pevHi all,
We've got an interesting question here...! Normally using a few test
SIMs here, we've tried work fine connecting using GPRS. However with
some particular Vodafone Ireland SIMS, when the board boots...
DirectShow CameraGrabber picture is broken01635 (7/1/2010 4:56:23 PM) UtfHi,
I'm using WinCE 6.0 and standard Microsoft DirectShow components including
(which is located in
How can I import SQL Compact on platform builder of wince 611351 (7/1/2010 9:09:43 AM) keyvanI wanna install SQL Compact on my device which is running wince 6.
First time after installation SQL Compact .cab files downloaded from
Microsoft website "http://www.microsoft.com/sqlserver/2005/en/us/
Simple hack to get $1500 to your home0793 (7/1/2010 1:14:47 PM) jolieSimple hack to get $1500 to your home At http://bannerclickandget.tk
Due to high security risks, i have hidden the cheque link in an
image. in that website on left side Above search box, click on image
Windows Mobile 6.5 Hindi OS01316 (7/1/2010 1:08:28 PM) UtfHelp required to build WM6.5 Hindi OS.
I have built English OS & wants to build Hindi OS(Locale=0439).
Please let know the changes to be made for Hindi Locale OS.
persistence of Hive based Registry (Once Again...)61271 (6/29/2010 6:00:23 AM) UtfHi ,
We have Ebox-4310 running WinCe 6R3.
We have to implement Hive based registry but we dont get success.
We also checked on forum but still we are struggling with the same.
What i did is as follows.
Bluetooth Card error3779 (6/25/2010 2:34:00 AM) xlscutHi All
Recently ,i have done something about the bluetooth develepment,now i
have some problems,when i initial the Hci layer,the program throwout initial
error :card error,it means not found the memory...
Converting 16bit nand to 8bits???How??? - 994266667 (6/15/2010 6:15:21 AM) vinoth006Hello ,
I am having the omapL138EVM board and my board supports the 16bits nand
driver. but i want to create a 8bit nand driver . can anybody tell where the
nand driver file located and how to change ...
storage memory vs program memory: how to pre-set?74774 (6/23/2010 3:39:51 PM) UtfDear all,
I need to assign more KBs to Program Memory.
I know that from user interface I can do that by going to:
Settings--> Control Panel--> System-->Memory, and moving the slider to the
SDIO8686 Wince6.0 WLAN02917 (6/30/2010 2:44:09 PM) smithHi has anyone worked on Marvell WM-G-MR-09 WLAN.It has a SDIO8686
chipset.We r using Samsung S3C6410 processor and the WLAN is connected
to HSMMC slot.We use 4bit out of 8bit to the WLAN.I have disabled
USB RNDIS image is broken while downloading in wince 5.001125 (6/30/2010 1:40:44 PM) dsrkingHi
When i download nk.bin to my target device using USB rndis in wince
5.0, sometimes it is fully downloaded and image is booted perfectly.
Sometimes, in the middle of downloading it is broken. I checked w...
Reading Eth Mac address in wince21600 (6/30/2010 7:24:05 AM) UtfHi all,
Can you please help me in reading Ethernet MAC address using my native
application in wince 6.0 R3