Ethernet connectivity issue / Cerdisp11666 (11/14/2009 9:19:01 AM) UtfHello,
On our headless device, cerdisp is running to access the windows GUI.
I can connect to cerdisp from my desktop pc. But after 10 sec., the connection
breaks down. Pings to the device aren't answere...
H4Sample and memory config.0741 (11/14/2009 4:43:23 AM) josephHi all,
I am trying to use the H4Sample BSP on a SDP 2420 board that i
have in hand. However, I am not able to get going at all even with
At the very top level, can somebody ans...
Can Activesync file browsing be turned off?1817 (11/13/2009 4:56:43 PM) MSCENVDue to security reasons, we need the ability to turn off file/folder
viewing and sharing of a CE device from a PC via Activesync. Is there
a known way to do this? I assumed removing Activesync/File Sync or SM...
MirrorBit NOR flash driver2798 (11/13/2009 8:23:02 AM) UtfHello,
I'm working on Windows CE 5.0 with a Frescale iMX31 BSP.
I have the following question...
In the path :
there is a MirrorBit NOR flash drive...
UART-DMA reception interrupt is not getting2740 (11/12/2009 10:29:43 AM) AnuI an facing one problem in UART-DMA combination.In UART-DMA,not able
to get the reception interrupt.If the UART driver is not
loaded ,but the UART connected to the FPGA the reception interrupt is
Device hangs when accessing San Disk U3 USB device0737 (11/12/2009 4:36:11 PM) UtfHello,
We have two platforms both running CE 6.0 with QFEs up to 8/31/09. One is an
ARM based and one is an x86 based (ICOP board).
When we plug in and access this Sand Disk device that has this U3 feature...
InterruptMask...how it works ?5908 (11/12/2009 11:50:05 AM) UtfHello,
I'm working with Windows CE 5.0 and I have the following problem.
Inside a touch driver, I call InterruptMask(TRUE) to mask the touch IRQ in
If I touch on the screen when the IRQ is...
R3 build failure -atlsd1792 (11/11/2009 3:28:59 AM) UtfWhen I install R3, I cannot build even a simple emulator project. I get the
following error at the end of build.log:
Renew Time0739 (11/12/2009 11:56:33 AM) JHello.
We have a board with an iMX31 CPU and an SMSC Ethernet controller running on
Is it possible to change the time to detect the insertion of the ethernet
cable. In the actual configuration i...
SideShow Device Project0785 (11/12/2009 9:26:23 AM) GSExperts,
This is a question regarding SideShow Device (Win CE 5.0)
Is anyone working on SideShow device project as of late ?. I'm trying to
bring up SideShowdevice on Win CE 5.0 with MIPSII CPU.
User defined system power state21025 (11/12/2009 5:01:21 AM) DavidIn WinCE5, it was said user can define OEM specified system power state,
except the states that predefined such as On, UserIdle, SystemIdle and
But when I try to define system power state nam...
CE 6.0 Installation Question2842 (11/11/2009 6:40:18 PM) DavidwHi,
I would like to upgrade to Win CE 6.0 R3,
I am going to do it on new computer.
My question is:
Do I need to install:
1. The Original disk, then the all the updates till R2 and R2, then all
Registry on CEPC41050 (11/11/2009 10:05:01 AM) UtfHello,
On our x86 cepc, the registry (file system hive based) seems to be not saved
I.e. after a reboot, sometimes the changes are lost.
How does the registry work on cepc, is it saved in...
SDK not containing correct libraries2999 (11/9/2009 10:40:06 AM) UtfAfter building my platform x86 win CE6, I created a SDK.
I use this sdk to develop a DLL.
The link phase need several libraries (OLE32,..) didn't present in the SDK.
In fact in link command line, the OLE32...
Local ressource missing in PUBLIC?2857 (11/10/2009 6:54:02 PM) UtfHello,
I try to build a debug build of my project, resulting in an error:
ERROR: Res2Res: Could not open
Looking closer, I found this ...
Problem with cloned BSP5738 (11/9/2009 8:26:05 AM) UtfHello,
I have cloned a BSP Freescale MX31.
In this BSP there are three displays (ex. DIS1, DIS2, DIS3) and these
displays set three environment variables (es. BSP_DIS1, BSP_DIS2, BSP_DIS3).
I have added a ...
setting time in oal3817 (11/9/2009 2:39:03 PM) UtfHi all,
How to set system time with RTC?
1. In the oal layer i am reading the RTC values and I want to update this
value with the system time, some API like setsystime cannot be compiled.
Please suggest h...
Missing PB Updates?11348 (11/9/2009 9:16:31 AM) JojjeHi,
When I check this page:
for PB 5.0 updates only the July monthly is listed. But I read
somewhere else that there was a September up...
Application calling the function defined in BSP's dll1823 (11/7/2009 8:24:02 AM) vincentHi:
IN CE600,mipsii BSP platform ,i build a C AP project.
i want to call a fuction defined in dll. this dll had been put in platform
..bib (abc.dll $(_FLATRELEASEDIR)\abc.dll NK SHK)