SBS 2008 - Set up your Internet address wizard

I need a little help with this task, right know I have my domain name and DNS 
records at Network Solutions and have an MX record pointing to my external IP 
address.  I do have my firewall then forwarding this to my internal SBS IP 
and I also have setup Reverse DNS (PTR Record) with my ISP for my external IP 
and mail.mydomain.com. Now here is the question if I have all of this setup, 
and I am going to use the "I want to manage the domain name myself" in the 
suffix I have the default "remote", should I change this to "mail" to match 
these records (more so the PTR record)?  Usually my non SBS servers with 
Exchange on them use the FQDN mail.mydomain.com in the Hub Transport and my 
OWA users use https://mail.mydomain.com/owa, what should I do? Should I just 
keep "remote" as the suffix and change the FQDN in Exchange from 
remote.mydomain.com to mail.mydomain.com?

Thanks Ryan.

0
Utf
1/15/2010 7:11:02 PM
windows.server.sbs 1975 articles. 0 followers. Follow

2 Replies
1589 Views

Similar Articles

[PageSpeed] 23

Did my other reply to your other posts
answer this question?
Russ

-- 
Russell Grover - SBITS.Biz [SBS-MVP]
Microsoft Gold Certified Partner
Microsoft Certified Small Business Specialist
World Wide 24hr SBS Remote Support - http://www.SBITS.Biz
Microsoft Online Services - http://www.microsoft-online-services.com


"Ryan Laurie" <RyanLaurie@discussions.microsoft.com> wrote in message 
news:1464E668-98BB-405F-AC77-6511B4738100@microsoft.com...
> I need a little help with this task, right know I have my domain name and 
> DNS
> records at Network Solutions and have an MX record pointing to my external 
> IP
> address.  I do have my firewall then forwarding this to my internal SBS IP
> and I also have setup Reverse DNS (PTR Record) with my ISP for my external 
> IP
> and mail.mydomain.com. Now here is the question if I have all of this 
> setup,
> and I am going to use the "I want to manage the domain name myself" in the
> suffix I have the default "remote", should I change this to "mail" to 
> match
> these records (more so the PTR record)?  Usually my non SBS servers with
> Exchange on them use the FQDN mail.mydomain.com in the Hub Transport and 
> my
> OWA users use https://mail.mydomain.com/owa, what should I do? Should I 
> just
> keep "remote" as the suffix and change the FQDN in Exchange from
> remote.mydomain.com to mail.mydomain.com?
>
> Thanks Ryan.
> 
0
Russ
1/15/2010 9:17:38 PM
This is a multi-part message in MIME format.

------=_NextPart_000_00A5_01CA95F9.83BF0610
Content-Type: text/plain;
	charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

There is absolutely no problem leaving it as mail.
When you run the wizard click on the avanced link where you enter your =
domain name and change remote to mail.

This will also generate your Self Signed SSL cert, which you can use =
until you get the one from GoDaddy
The godaddy one can be created using just single domain and the URL =
mail.domain.com and no DNS record changes would be required.

--=20
Cris Hanna [SBS - MVP] (since 1997)
Co-Contributor, Windows Small Business Server 2008 Unleashed
http://www.amazon.com/Windows-Small-Business-Server-Unleashed/dp/06723295=
73/ref=3Dpd_bbs_sr_1?ie=3DUTF8&s=3Dbooks&qid=3D1217269967&sr=3D8-1
Owner, CPU Services, Belleville, IL
A Microsoft Registered Partner
------------------------------------
MVPs do not work for Microsoft
Please do not submit questions directly to me.

  "Ryan Laurie" <RyanLaurie@discussions.microsoft.com> wrote in message =
news:1464E668-98BB-405F-AC77-6511B4738100@microsoft.com...
  I need a little help with this task, right know I have my domain name =
and DNS=20
  records at Network Solutions and have an MX record pointing to my =
external IP=20
  address.  I do have my firewall then forwarding this to my internal =
SBS IP=20
  and I also have setup Reverse DNS (PTR Record) with my ISP for my =
external IP=20
  and mail.mydomain.com. Now here is the question if I have all of this =
setup,=20
  and I am going to use the "I want to manage the domain name myself" in =
the=20
  suffix I have the default "remote", should I change this to "mail" to =
match=20
  these records (more so the PTR record)?  Usually my non SBS servers =
with=20
  Exchange on them use the FQDN mail.mydomain.com in the Hub Transport =
and my=20
  OWA users use https://mail.mydomain.com/owa, what should I do? Should =
I just=20
  keep "remote" as the suffix and change the FQDN in Exchange from=20
  remote.mydomain.com to mail.mydomain.com?

  Thanks Ryan.

------=_NextPart_000_00A5_01CA95F9.83BF0610
Content-Type: text/html;
	charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; charset=3Dutf-8">
<META content=3D"MSHTML 6.00.6000.16945" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>
<DIV><FONT face=3DArial size=3D2>There is absolutely no problem leaving =
it as=20
mail.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>When you run the wizard click on the =
avanced link=20
where you enter your domain name and change remote to mail.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>This will also generate your Self =
Signed SSL cert,=20
which you can use until you get the one from GoDaddy</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>The godaddy one can be created using =
just single=20
domain and the URL mail.domain.com and no DNS record changes would be=20
required.</FONT></DIV></DIV>
<DIV><BR>-- <BR>Cris Hanna [SBS - MVP] (since 1997)<BR>Co-Contributor, =
Windows=20
Small Business Server 2008 Unleashed<BR><A=20
href=3D"http://www.amazon.com/Windows-Small-Business-Server-Unleashed/dp/=
0672329573/ref=3Dpd_bbs_sr_1?ie=3DUTF8&amp;s=3Dbooks&amp;qid=3D1217269967=
&amp;sr=3D8-1">http://www.amazon.com/Windows-Small-Business-Server-Unleas=
hed/dp/0672329573/ref=3Dpd_bbs_sr_1?ie=3DUTF8&amp;s=3Dbooks&amp;qid=3D121=
7269967&amp;sr=3D8-1</A><BR>Owner,=20
CPU Services, Belleville, IL<BR>A Microsoft Registered=20
Partner<BR>------------------------------------<BR>MVPs do not work for=20
Microsoft<BR>Please do not submit questions directly to me.<BR></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV>"Ryan Laurie" &lt;<A=20
  =
href=3D"mailto:RyanLaurie@discussions.microsoft.com">RyanLaurie@discussio=
ns.microsoft.com</A>&gt;=20
  wrote in message <A=20
  =
href=3D"news:1464E668-98BB-405F-AC77-6511B4738100@microsoft.com">news:146=
4E668-98BB-405F-AC77-6511B4738100@microsoft.com</A>...</DIV>I=20
  need a little help with this task, right know I have my domain name =
and DNS=20
  <BR>records at Network Solutions and have an MX record pointing to my =
external=20
  IP <BR>address.&nbsp; I do have my firewall then forwarding this to my =

  internal SBS IP <BR>and I also have setup Reverse DNS (PTR Record) =
with my ISP=20
  for my external IP <BR>and mail.mydomain.com. Now here is the question =
if I=20
  have all of this setup, <BR>and I am going to use the "I want to =
manage the=20
  domain name myself" in the <BR>suffix I have the default "remote", =
should I=20
  change this to "mail" to match <BR>these records (more so the PTR=20
  record)?&nbsp; Usually my non SBS servers with <BR>Exchange on them =
use the=20
  FQDN mail.mydomain.com in the Hub Transport and my <BR>OWA users use =
<A=20
  =
href=3D"https://mail.mydomain.com/owa">https://mail.mydomain.com/owa</A>,=
 what=20
  should I do? Should I just <BR>keep "remote" as the suffix and change =
the FQDN=20
  in Exchange from <BR>remote.mydomain.com to =
mail.mydomain.com?<BR><BR>Thanks=20
  Ryan.<BR></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_00A5_01CA95F9.83BF0610--

0
Cris
1/15/2010 9:43:42 PM
Reply:

Similar Artilces:

Managing 2 email addresses in Outlook 7 on Windows Vista
I have set up 2 email accounts but they are both coming into the same Inbox,Junk Mail, etc. I need to keep these accounts separate. Instructions advise that I click the start button, then control panel, then user accounts, then mail. Problem is I do NOT have 'mail' as an option to click on under user accounts. How do I find the Outlook Profile to set up so I can choose which email account I want to receive? Is there a simple way of doing this? Also how do I set up the in,sent, out, etc. for this second email account? -- Outlook 07 user "Outlook 07 use...

How do I set interval for automatic save? (not auto recovery)
Dee, From a previous post by Dave Peterson: If you're running xl2k or earlier, install the autosave addin via windows|Start button|settings|control panel|Add or remove programs If you're running xl2002+, then if you can find a copy of the autosave addin from an earlier version, it should work ok. But xl2002+ has something called autorecovery. It's not the same as autosave, but will allow you to recover files if excel/windows crashes. As an alternative, you may want to consider using Jan Karel Pieterse's addin called AutoSafe (note spelling). It doesn't overwrite ...

Money 2008 User Manual
MS has an online Microsoft Money Plus User Guide at http://www.microsoft.com/money/support/manual/MoneyPlus/3sku_toc_p001.htm Unfortunately, this brings up an online document that does not provide a means of doing a search. I wanted to search the document for preferred payees but could not find a way to do it. Does a pdf version of the manual exists somewhere? If not, does an index of the document exist (it does have a TOC on the first page)? I have used Help out of Money, but was hoping for more information from the User Guide. Thanks, Mike in short the Online user guise was not design...

RWW SBS 2008 02-24-10
Cannot connect to client desktop using "Domain IP/remote" We get to Remote Web Workplace main menu. Select connect to desktop and receive the following error: "To connect to Remote Web Workplace you must install the proper certificate. Contact the person who provides tech support for your network." We tried to install the "Install Certificate Package" on the client as suggesed with no luck. SBS 2003 was seamless. What am I missing with 2008? Ken wrote: >Cannot connect to client desktop using "Domain IP/remote" We get to >Re...

Offline address book #5
Hi We are still using Outlook 97 on our Laptops at work. I would like to place a copy of our "Global Address List (Offline)" which is located somewhere on my works laptop, onto my own PC at home to save typing in several hundred email addresses. Can anyone help with what I need to look for and how I can do it? -- Kind Regards Mick Mick <micksoutham@msn.com> wrote: > We are still using Outlook 97 on our Laptops at work. I would like > to place a copy of our "Global Address List (Offline)" which is > located somewhere on my works laptop, onto my...

Credit Card Address verification for mail order???
how do you get address verification from the credit card transaction for mail order. EXAMPLE when some one calls there card number in how do you get address verification, Zip code match or exact match. our old system ( not the RMS) would ask you if this is a mail order or phone order and if it was it would ask for address and then zip code then it would print on the receipt if it was a exact match. thanks for the help RMS does not support address verification. There are a couple of add-ins that allow this, or if you process the payments in PCCharge outside of RMS (not using the integ...

address book #49
I have Outlook 2003 SP3. It's on 3 machines. One will not accept address books in Properties of Contact lists. Did I not accept an add-on in the initial installation? aSussertown <DROPsussertown@adelphia.net> wrote: > I have Outlook 2003 SP3. It's on 3 machines. One will not accept > address books in Properties of Contact lists. Did I not accept an > add-on in the initial installation? Is the Outlook Address Book service in your profile? -- Brian Tillman ...

How can I set Outlook, I have problems with that.
I Try to use Outlook in my PC but I don't have a clue to set Outlook, I know if I can set the program I see my mail bye Outlook but is difficult to me understand... please can you help me how to set the program step by step? Thanks... You will need the server names from your ISP in order to set it up. We cannot help you with that. Most ISPs will post instructions on how to setup Outlook Express (they will not support Outlook) but you can use the same information to set up Outlook account(s). --� Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion in...

Send from exchange mailbox alias email addresses
I want to "send from" an alias email address. Example, admin@123.com (set as primary), admin@abc.com Exchange 2003, recipients policy accepts these domain names. So if you send to either email the admin@123.com will get the emails. I can receive, but now I want to send as one of my alias email addresses. I open outlook, I have my "from filed" showing in the email, in the "from field" I want the email to come from one of my alias addresses; I type it in, outlook resolves to my primary email address, first problem. So I create a "contact" with ...

Exchange 2003 from SBS 2003
Hi there, Sounds stupid, I know, but just wanted to confirm Exchange 2003 that comes with SBS 2003 has exactly the same configuration, administration etc. as the stand alone product (I know setup can't be the same, as it's part of the SBS overall install routine). Thanks! Daniel Hello Daniel, product is the same as the exchange standart edition, with just some restrictions by the small business server packet and the additional pop3 connector, which is missing in the standart and enterprise version. Regards Roger "Daniel Mendes" <danielmendes@globo.com> schrieb...

Sync Outlook over Internet
Hi, I want to sync my offline Outlook with our server over the internet. The only way I can do this, is via WebDAV. I cannot find a tool that does that for me. Can you? --- Roland Wolters http://www.habbiebabbie.net ***** Please react via UseNet only ******** What's your mail server? Roland Wolters wrote: > Hi, > > I want to sync my offline Outlook with our server over the internet. > The only way I can do this, is via WebDAV. I cannot find a tool that > does that for me. Can you? > > > --- > Roland Wolters > http://www.habbiebabbie.net > ***** Pleas...

Convergence 2008
Who's been to past Convergence and what's it all about? ...

SBS Monitoring 4GB (2008) Now what?
How do I either delete the monitoring database or move it? I have SQL Express, can see the database, have shrunk the log database, but stuck with the .mdf SBS Monitoring. Errors all over the place saying I can add or modify the data. Help and TIA Bobby I'd start here: http://blogs.technet.com/sbs/archive/2009/07/14/sbs-2008-console-may-take-too-long-to-display-alerts-and-security-statuses-display-not-available-or-crash.aspx And make sure to read through the comments of this blog post too. They cover manually running the cleanup the first time (which I recommend) s...

INTERNET MILLION DOLLARS
INTERNET MILLION DOLLARS - www.InternetMillionDollars.biz Watch the VIDEO on YOUTUBE... NOW! http://www.youtube.com/watch?v=dXQUjk5EGV0 MAKE MONEY INSTANTLY using 2007 featured INTERNET MILLION DOLLARS as a resource. WORK FROM HOME HOMEBASED JOBS AND IDEAS BUSINESS OPPORTUNITY Professor James Bradley's "Quick and real way to make BIG MONEY on the Internet!" The Independent Finally you have FOUND IT! Make a FORTUNE each month... .... every month! 100% ON AUTOPILOT Read it NOW and CHANGE YOUR LIFE! Are you fed up with being short of MONEY all the time? Do you DREAM about a...

Set Focus 05-22-07
I have a command button that displays and filters 2 forms. I would like to set the focus to a specific field on another form when these are opened. TIA In news:1179848189.605344.149570@r3g2000prh.googlegroups.com, myxmaster@hotmail.com <myxmaster@hotmail.com> wrote: > I have a command button that displays and filters 2 forms. I would > like to set the focus to a specific field on another form when these > are opened. Something along the lines of: DoCmd.OpenForm "Form1", WhereCondition:="[SomeField]=1" DoCmd.OpenForm "Form2", WhereConditi...

How to set view titles in this scenario.
Hi My application always creates two view on file new, file open . Its a MDI application. I have refered following link. http://www.codeguru.com/cpp/w-d/doc_view/viewmanagement/article.php/c3275/ Problem is , when I execute the application, and new document is automatically created. But the both view titles remain same. I want them to be xxx1:1 and xxx1:2 but both of them display xxx1 only. This is not the case when I manually click file->new. How to set the proper view titles here. thanks leee. The link you mentioned does not work. If you are setting titile of MDI child frame, you can...

User not vissible in Global Address List.
Hi, We have a user that is not vissible in the Global Address List, but it is vissible in a Sub Address List. I checked the filter which is used for the global address list. When i test the filter i can find the user?? Can anybody help me find the problem. We use Exchane 2000 SP3, Win2K Server, Outlook 2000 Goldhorn ...

Recipient Policies based on part of email address
Is it possible using Recipient Policies to accept emails in such a way. Email sent from user1@company.com to data+application1@company.com and landed in application1@company.com mailbox. Application then able to access this mailbox and parse data part of destination address. Important here that email is sent from internal users so should be routed inside exchange. If it's not possible to do using Recipient Policies but possible to achieve same effect using different address format etc - please let me know. Thank you. For recipient application1@company.com to recieve email for data+appl...

I can't set up my account on Windows Mail
Hi . I need help, I tried to set my email up on Windows mail using, gmail accounts, gmx and everything you could think. I worked on it for days but nothing ever worked. I'm pretty sure I put in the right POP and all. What else can I do? Does Gmail and gmx and all not work on a mail server on the actual desktop? Please help me? asiankelsey;1224241 Wrote: > Hi . I need help, I tried to set my email up on Windows mail using, > gmail > accounts, gmx and everything you could think. I worked on it for days > but > nothing ever worked. I'm pretty sure I put i...

Internet Options Menu
I have contracted (and cleaned) some malicious softwear but am left with a residual problem. I cannot access the Internet Options under the Tools pull down menu. When I attempt to use this function, I get a message stating "This operation has been cancelled due to restrictions in effect on this computer. Please contact your administrator". it works from control panel. Any ideas?? Thanks in advance Michael Ask in the Internet Explorer newsgroup Here is the link for the right forum http://communities.microsoft.com/newsgroups/default.asp?icp=InternetExplorer Good Luck! -- ...

Error creating Distribution group SBS 2003/Exchange 2003
When I try and create a mail enabled dist group I get an error message that "Exchange could not create public folder" Then if I choose OK it says "Do you want to keep this dist group?" I have tried everything I can think of. We have to create these folders ASAP. How can I troubleshoot this? I tried network monitoring but that didn't help - unless I am doing something wrong. SBS and Exchange on same server obviously. Dan "Danno" <Danno@discussions.microsoft.com> wrote: >When I try and create a mail enabled dist group I get an error message tha...

Setting a rule to look for a word in the 'from' header?
Hi O' 20002 I can't seem to set a rule that looks for a word in the 'From' header in the inbox. It's the part that is in the 'Displayed Name' box when of the senders email address. Any Ideas? Thanks in advance Dave F. It is a standard Wizard Rule so what is the problem? Make sure that the peolpe in the rule are in your Address Book/Contacts folder as well. -- Roady www.sparnaaij.net Microsoft Office and Microsoft Office related News Also Outlook FAQ, How To's, Downloads and more... ----- "Dave F" <david.fox@burohappold.com> wrote in mes...

new domain address
This is a very easy question but since I have not done it in a long time, I forgot how to do it. I am hosting three domains in my Exchange 2003 server. They are A.com, B.com and C.com. My users have e-mails address for all these domains. Now, I am adding a new domain (D.com). I forgot how to do it. Can you help? Recipient Policy :-) Add it. Make sure that it's checked, apply it, watch all objects get updated with new domain as well. Optionally, make said address Primary Reply-to address prior to applying. -- Ben Winzenz Exchange MVP MessageOne "Dooma" <Say-no-to-sp...

show this folder as an address book
Hi, this tick box is greyed out on my outlook 2k , and i'm unable to view the contacts as an address book when i compose a message. Can someone refresh my memory what i need to do to correct it? Rgds Stu Right click on the contacts group you want to add. Click properties. Check 'Show this folder...' on the 'Outlook Address Book' tab. Then pulldown 'tools', 'address book', 'tools', 'options' and add the contacts list you need. Good luck. >-----Original Message----- >Hi, > this tick box is greyed out on my outlook 2k , and...

ActiveX: Reading URL content from Internet Explorer
Hi, I've written an MFC ActiveX control to display my own file format - call it ".xyz" files - in Internet Explorer. I've followed the instructions at http://msdn.microsoft.com/workshop/components/activex/registration.asp, and sure enough when I point my IE at http://server/myfile.xyz my ActiveX control is loaded. But how do I read the content of the file? As a hack, I'm looking at the 'src' property of my control and using WinInet to download the file - that works, and confirms that control is working. But using a packet sniffer I see that when I hit Reload,...