Upgrade from Exchange 2000 to Exchange server 2003
I currently running Exchange 2000 server in a one domain forest. We have one
Windows server 2003 DC and three windows 2000 server DC. The Windows
Server 2003 is the FSMO. All DCs are GC. The Exchange 2000 Server is
running on a member server and on Windows 2000 server OS. I want to upgrade
to Windows Server 2003, what is the best way to do this? I have a new server
installed with Windows Server 2003 as a member server. I am thinking of
installing the Exchange server 2003 on this box.
What is the best approach to upgrade the Exchange Server to 2003.
sounds like a good idea; instal...Risk Management on Project Server 2003
I am looking for following information to support Risk Management on Project
1. Why SharePoint is needed?
2. What features of SharePoint are used ?
3. What i need to do to existing Project Server (PS) and SharePoint
installation to get the required feature in PS?
If you need to do Risk management in Project Server 2003, then you need to
use SharePoint. This is because SharePoint provides the functionality for
Risk, Issue, and Document management with Project Server. If you already
ins...Remove an exchange 5.5 server from a site
What's the best way to remove an E 5.5 from a site?
We have migrated from NT 4.0/E5.5 to W2K/E2K. We have many E5.5 sites and
now I want to remove one of the E 5.5 from it�s site/(AG)
All new E2K servers are in there own AG/Site. The server to remove is the
only Exchange server in it's site.
"TJ" <firstname.lastname@example.org> wrote in news:OhMYfIL8DHA.2952
> What's the best way to remove an E 5.5 from a site?
FAQ: http://www....Service Pack 1 for server 2003, broke my Exchange
I have an exchange server here and I believe my problem to be more on the
networking side. After updating to Service Pack 1 for server 2003 I notice
that I am loosing connectivity on one of the subnets that the server has.
Now I know it's the correct thing to do, but the server was configured with
two IP Addresses from two different subnets; 10.0.0.0/24 and 192.168.1.0/24.
This was done so that the office on the 10.0.0.0/24 network could talk to
exchange and do their tasks.
The 192.168.1.0/24 Address was added to allow email to be sent from the
outside world to the exchange serve...Email Sending Problem Solution
Email Router is installed on Exchange Server on Administration site,
Try to install on Default web Site not on Administration,
After this correction, email sending is succesfull.
...RPC-http using single server
I'm trying to follow the instructions in the MS paper "Exchange Server 2003 RPC over HTTP Deployment Scenarios" to configure my Exchange 2003 Enterprise server to use RPC over HTTP in a single server installation.
I don't have "RPC-HTTP" tab in my server properties dialog in ESM! I thought everything was ready up to this point, but I've obviously missed something. Any ideas?
D'oh! In "networking services" of Windows setup of the Exchange server, RPC proxy wasn't installed by default...
> I'm trying...Exchange 2003 Home Server
I have an Exchange 5.5 and an Exchange 2003 server with a separate Windows
Server 2003 as the "main" Active Directory controller. My mailbox sits on
the Exchange 2003 server.
Yesterday, I used the Active Directory Users/Computers on the Domain
Controller to move another user's mailbox to the Exch 2003 server (MAIL) from
the Exch 5.5 Srvr (SMTP). It all looked OK until I started getting this:
"A configuration error in the e-mail system caused the message to bounce
between two servers or to be forwarded between two recipients. Contact your
Use...Log on to windows 2000 server
I have used the same password to log on to my windows 2000 server for over three years and suddenly it stopped working. How can I get into the domain to reactivate it? Or can I
Also the log in from the workstations are not working.
Get an administrator to reset your password
"frdiaz" <email@example.com> wrote in message
> I have used the same password to log on to my windows 2000 server for over
three years and suddenly it stopped working. How can I get into the domain
to reactivate it? Or can I?
> Also ...Exchange server 2003 smtp queue
I think I have a virus.
I have many messages (email) in the SMTP queue.
These are "strange messages".
For example : from firstname.lastname@example.org to email@example.com
The exchange server, naturally, can not deliver and I have a lots of
Could anyone help me, please ?
First, open up any of the message in Notepad. Look at the received
header and find out what machine inside your organization is generating
those emails. Take that machine off of your network.
Second, check if your Exchange server is open for relay. It should not
be ..."Unable to connect to server" error 800ccc0e/800cccoe
I've gotten this error before, normally it means the
server is unresponsive or non-existent. The problem I
have is that I can ping the server, login using Horde
(webmail) on the same server and-- worst of all-- can
even use the server's I.P. address without any response.
I also fail to send through any SMTP server, whether my
own or my ISP's. I don't have Pc-Cillin installed, as the
Outlook Support site suggested, but I am running Norton
Antivirus. Is there anything else that could possibly
cause this issue?
Try turning off ou...Exchange 2000 Server recovery procedures
I'm writing an Exchange 2000 server recovery plan for my company and not
sure the following procedures are correct or not.
Situation: Partition (E:) holding the database files is down due to hardware
failure but the partition (D:) holding the transaction log files is
1. Restore the full backup performed last night but NOT "last backup set".
2. Copy the transaction log files (E*.log) into the temp folder and
overwrite temp files e.g. E:\First Storage Group\
3. Run ESEUTIL.EXE /CC to replay transactions.
4. Mount the stores to make them online.
Meth...Achieving HA -- clustering+SAN or distributed ?
I was wondering what your opinion is in providing High Availability for
Exchange 2003, if site resilency can be assumed (e.g. geo-cluster /
replication not required)?
Say if the requirement is not to have 500 users (out of several thousand
users) down at any given time, Is it better to:
1. go the clustering+SAN route, where the clustering provide HA at server
level and our SAN provides redundancy from HBA and out (e.g. redudant HBA, FC
switches, SAN controllers, RAID, etc); or
2. go with a distributed model so to minimize impact of a failure?
Thanks in advance,
On ...TERMINAL SERVER (Re-posted)
This is a repost as I have managed to resolve the issue but I do not know
why. Does anyone have any ideas?
Well I tried pretty much everything with no sucess, from adding security to
creating new users (local and domain) to giving them "super human rights" but
no sucess. So in desperation we copied the documents and settings folder from
the "working" user to a new domain user on the (TS profile).
What do you know the login performance was amazing. So we started again this
time checking bit by bit what component in the documents and settings folde...SBS as a DC but CRM on another Server
I just have few questions which I hope someone out there will be able
to answer for me.
We have an SBS 2003 Server which is our DC and we are running SQL
Server, Exchange Server and Microsoft CRM on a non-raided server.
1. Is it possible to have an SBS Server 2003/8 running as a DC with
SQL Server & Exchange on it but run Microsoft CRM on another server
running Windows 2003/2008 Server. We just want to spread the workload
on the DC.
2. Bar the obvious reasons for using raid, would you recommend having
SBS running of a raided machine? What about CRM if it can be run from
an...Clustered column graph with mixed data in 2nd column
I'm trying to create a clustered column graph with mixed data in the 2nd
column and I cannot find a way to do it. Any suggestions?
What's "mixed data"? Do you mean you want to build a stacked column for the
second column in the cluster? If so, look here:
Jon Peltier, Microsoft Excel MVP
Tutorials and Custom Solutions
Peltier Technical Services, Inc. - http://PeltierTech.com
"drhatt" <firstname.lastname@example.org> wrote in message
news:648BC5CE-4DE9-433C-A824-325B6995D...modeless CDialog access to CListView members
I have created a modeless CDialog
m_pFilterDlg=3D new CFilterDlg();
I have an apply button in this CFilterDlg, when the user click on the
apply button a filter have to be set in the CListView.
How can I acces to this CListView members.
Or is it possible to be informed in the CListView class when the apply
button in ...Can't Login to CRM
When I log into CRM i get the below mentioned error. It usedto work just a
week ago. No changes have been made to anything and all of a sudden we are
recieveing this error.
Server Error in '/' Application
Description: An error occurred during the processing of a configuration file
required to service this request. Please review the specific error details
below and modify your configuration file appropriately.
Parser Error Message: Unable to load file
'Microsoft.Crm.Applica...Complex Update Query in SQl Server 2000
I need to update ACTINDX in UPR40500 for each JOBTITLE in MYTABLE.
We have modified the ACTNUMBR in 'MYTABLE' whose segments are contained in
ACTINDX ACTNUMBR_1 ACTNUMBR_2 ACTNUMBR_3 ACTNUMBR_4 ACTNUMBR_5
30562 222 411001 000000 150 350
30563 222 411001 000000 155 355
If you are storing the account number as a string in my table, an...Removing a Front-End Server
I have an Exchange 2003 Back-end server and also an Exchange 2003 Front-end
server both running on Windows 2003. I need to get rid of my front end
server. Do I just have to uncheck the box on the front end "make this server
a front end server" and then remove the server in ESM? Our front end server
is only being used for web access which is no longer needed.
you can uninstall this exchange server, before remove it (if necessary) from
FAQ Exchange: http://faqexchange.dyndns.org
Site personnel: http://webfami...Change SQL Server Collation
Please comment on determine whether or not to change GP SQL Server Collation
and the possible path to do it.
We had initial installed Great Plains on SQL Server 6.5 with suggested
collation and sort order (binary order, case sensitive) back to ten years ago
and then we had upgraded SQL Server into 7.0 and then SQL 2000 later. Then
the collation in SQL 2000 was converted into strange Collation Name:
Now I am planning to upgrade SQL Server and GP also. Is it good time for me
to change the collation from Compatibility_50_409_0 to current suggested
What ...Exchange Server Recipient Limits
We are currently running Exchange 2003 in mixed mode, and would like to
limit the recipient limits in Exchange.
We would like to limit it to 40 globally.
The problem we are having is that want DLs to count as 1 recipient, and
not the actual number of members. From what I recall, this is how
Exchange 5.5 behaved.
Any ideas or suggestions?
Thanks much to all,
...Microsoft Project Portfolio Server
Attempting to configure the mapping templates in the Project Server
Gateway - Attribute Mapping Template Management.
I am able to create a new template, and my fields from PPS appear, but
the dropdown menu to pick a corresponding field from Project Server,
is displaying "none" for each and every field/attribute (40+
Appreciate any guidance.
On Nov 30, 1:39=A0pm, Kim <khubbard0...@gmail.com> wrote:
> Attempting to configure themappingtemplates in the Project Server
> Gateway -AttributeMappingTemplate Management.
> I...Server Specific Error 49294966781
Result of running this command
C:\WINNT\Profiles\Administrator>ESEUTIL /mk c:\exchsrvr\mdbdata\edb.chk
Microsoft(R) Windows NT(TM) Server Database Utilities
Copyright (C) Microsoft Corporation 1991-1999. All Rights Reserved.
Initiating FILE DUMP mode...
Checkpoint file: c:\exchsrvr\mdbdata\edb.chk
FullBackup time:0/0/1900 0:0:0
IncBackup time:0/0/1900 0:0:0
Signature: Create time:6/14/2001 11:4:33 Rand:24842 Computer:
Env...Assigning task to another resouce in Project server
I have a Project server 2007 installed on a Single server. All users updates
their tasks using Outlook 2007 Plug-In synchronized to Project server.
One of the task was assigned to a resource X. A new resource Y was added to
project and the Task assigned to resource X was re-assigned to resource Y.
When resource Y synchronize tasks using outlook 2007, the re-assigned task
was reflected in resource Y's tasks list in outlook 2007. But resource X also
has the same task listed as it was not removed from outlook 2007 task for
How do I fix this? i,.e I would l...Can't Access Microsoft Exchange Server?
Hello, everyone. I recently had to get a new hard
drive. My PC manufacturer's service group moved my old
drive down to D: and installed a new one as C:. Now the
old merely acts as storage.
Outlook 2002 (XP) was installed, with the rest of Office
on my new hard drive. However, each time I attempt to
open it, I get a message saying that it can't access the
Microsoft Exchange Server. I am prompted to either
retry, work offline or cancel. Retrying begets the same
message. Working offline won't allow me to configure my
e-mail in Outlook or see My Outlook folders. Can...