Global Data Catolog/Exchange

Folks

I am having problems installing exchange on one of my servers. I had
exchange 07 installed but it would not load in the MMC so I uninstalled
it. Tried to reinstall it and get a message that the Global Data Catolog
cannot be found. 

I have aslo noticed that I cannot access Sharepoint which is installed
on the same server. 

Neither is in production yet but plan was to go live this week. 

I have uploaded 2 files from the DC:
ntfrsutl.txt - result fo running ntfrsutl ds on the DC
dcdiag - result of running dcdiag on the DC

I have also included the IP config files from the server giving
problems and the DC. 

Hope you can help. 

Adrian

Windows IP Configuration from non-dc server

Host Name . . . . . . . . . . . . : oneview-share
Primary Dns Suffix  . . . . . . . : oneview.ie
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : oneview.ie

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit
Server Ad
apter #2
Physical Address. . . . . . . . . : 00-19-BB-CA-EB-3A
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.200
---------------------------------------------------------------------------
IPconfig from DC server

Windows IP Configuration

Host Name . . . . . . . . . . . . : WINONEV-5OLAJCH
Primary Dns Suffix  . . . . . . . : oneview.ie
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : oneview.ie

Ethernet adapter Local Area Connection 4:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . : HP NC382i DP Multifunction
Gigabit Serve
Adapter #4
Physical Address. . . . . . . . . : 00-25-B3-24-73-68
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . : HP NC382i DP Multifunction
Gigabit Serve
Adapter #3
Physical Address. . . . . . . . . : 00-25-B3-24-73-66
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . : HP NC382i DP Multifunction
Gigabit Serve
Adapter #2
Physical Address. . . . . . . . . : 00-25-B3-24-73-64
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . : HP NC382i DP Multifunction
Gigabit Serve
Adapter
Physical Address. . . . . . . . . : 00-25-B3-24-73-62
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . :
fe80::e9b0:f977:59ec:e6cd%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.200(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 218113459
DHCPv6 Client DUID. . . . . . . . :
00-01-00-01-11-94-4D-6C-00-25-B3-24-73-6

DNS Servers . . . . . . . . . . . : ::1
127.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 8:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . :
isatap.{E0C07D03-87A4-4112-B8DA-76C10B8B
EDD}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 16:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . :
isatap.{E3C2CCA5-4AAC-47D9-8548-E43D6094
A66}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 13:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . : Teredo Tunneling
Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 14:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . :
isatap.{9855D098-460D-4FC7-BCD0-F6C0574A
304}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 15:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . :
isatap.{A16A655E-537D-4B01-A8FA-B2F02013
7A5}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
-----------------------------------------------------------------------------


-- 
abarber
------------------------------------------------------------------------
abarber's Profile: http://forums.techarena.in/members/168661.htm
View this thread: http://forums.techarena.in/active-directory/1287360.htm

http://forums.techarena.in

0
abarber
12/29/2009 3:06:57 PM
windows.server.active_director 902 articles. 0 followers. Follow

4 Replies
768 Views

Similar Articles

[PageSpeed] 40

On Dec 29, 10:06=A0am, abarber <abarber.43y...@DoNotSpam.com> wrote:
> Folks
>
> I am having problems installing exchange on one of my servers. I had
> exchange 07 installed but it would not load in the MMC so I uninstalled
> it. Tried to reinstall it and get a message that the Global Data Catolog
> cannot be found.
>
> I have aslo noticed that I cannot access Sharepoint which is installed
> on the same server.
>
> Neither is in production yet but plan was to go live this week.
>
> I have uploaded 2 files from the DC:
> ntfrsutl.txt - result fo running ntfrsutl ds on the DC
> dcdiag - result of running dcdiag on the DC
>
> I have also included the IP config files from the server giving
> problems and the DC.
>
> Hope you can help.
>
> Adrian
>
> Windows IP Configuration from non-dc server
>
> Host Name . . . . . . . . . . . . : oneview-share
> Primary Dns Suffix =A0. . . . . . . : oneview.ie
> Node Type . . . . . . . . . . . . : Unknown
> IP Routing Enabled. . . . . . . . : No
> WINS Proxy Enabled. . . . . . . . : No
> DNS Suffix Search List. . . . . . : oneview.ie
>
> Ethernet adapter Local Area Connection:
>
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit
> Server Ad
> apter #2
> Physical Address. . . . . . . . . : 00-19-BB-CA-EB-3A
> DHCP Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 192.168.0.10
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 192.168.0.1
> DNS Servers . . . . . . . . . . . : 192.168.0.200
> -------------------------------------------------------------------------=
--
> IPconfig from DC server
>
> Windows IP Configuration
>
> Host Name . . . . . . . . . . . . : WINONEV-5OLAJCH
> Primary Dns Suffix =A0. . . . . . . : oneview.ie
> Node Type . . . . . . . . . . . . : Hybrid
> IP Routing Enabled. . . . . . . . : No
> WINS Proxy Enabled. . . . . . . . : No
> DNS Suffix Search List. . . . . . : oneview.ie
>
> Ethernet adapter Local Area Connection 4:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . : HP NC382i DP Multifunction
> Gigabit Serve
> Adapter #4
> Physical Address. . . . . . . . . : 00-25-B3-24-73-68
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
>
> Ethernet adapter Local Area Connection 3:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . : HP NC382i DP Multifunction
> Gigabit Serve
> Adapter #3
> Physical Address. . . . . . . . . : 00-25-B3-24-73-66
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
>
> Ethernet adapter Local Area Connection 2:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . : HP NC382i DP Multifunction
> Gigabit Serve
> Adapter #2
> Physical Address. . . . . . . . . : 00-25-B3-24-73-64
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
>
> Ethernet adapter Local Area Connection:
>
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . : HP NC382i DP Multifunction
> Gigabit Serve
> Adapter
> Physical Address. . . . . . . . . : 00-25-B3-24-73-62
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> Link-local IPv6 Address . . . . . :
> fe80::e9b0:f977:59ec:e6cd%10(Preferred)
> IPv4 Address. . . . . . . . . . . : 192.168.0.200(Preferred)
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 192.168.0.1
> DHCPv6 IAID . . . . . . . . . . . : 218113459
> DHCPv6 Client DUID. . . . . . . . :
> 00-01-00-01-11-94-4D-6C-00-25-B3-24-73-6
>
> DNS Servers . . . . . . . . . . . : ::1
> 127.0.0.1
> NetBIOS over Tcpip. . . . . . . . : Enabled
>
> Tunnel adapter Local Area Connection* 8:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . :
> isatap.{E0C07D03-87A4-4112-B8DA-76C10B8B
> EDD}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
> Tunnel adapter Local Area Connection* 16:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . :
> isatap.{E3C2CCA5-4AAC-47D9-8548-E43D6094
> A66}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
> Tunnel adapter Local Area Connection* 13:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . : Teredo Tunneling
> Pseudo-Interface
> Physical Address. . . . . . . . . : 02-00-54-55-4E-01
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
> Tunnel adapter Local Area Connection* 14:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . :
> isatap.{9855D098-460D-4FC7-BCD0-F6C0574A
> 304}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
> Tunnel adapter Local Area Connection* 15:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix =A0. :
> Description . . . . . . . . . . . :
> isatap.{A16A655E-537D-4B01-A8FA-B2F02013
> 7A5}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> -------------------------------------------------------------------------=
--=AD--
>
> --
> abarber
> ------------------------------------------------------------------------
> abarber's Profile:http://forums.techarena.in/members/168661.htm
> View this thread:http://forums.techarena.in/active-directory/1287360.htm
>
> http://forums.techarena.in

remove the loopback IP on the domain controller and point it to itself.
0
l3ytes
12/29/2009 3:36:37 PM
Hello abarber,

On the DC disable all unused NICs. Also better use the real ip address insterad 
of the loopback, even if that isn't the solution to your problem.

Exchange should run on a member server for it's own.

If you don't use IPv6 disable it:
http://blogs.dirteam.com/blogs/paulbergson/archive/2009/03/19/disabling-ipv6-on-windows-2008.aspx

There is a known problem when installing Exchange on Windows server 2008 
if IPv6 isn't disabled.

What exactly do you mean with "but it would not load in the MMC"?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers 
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm 


> Folks
> 
> I am having problems installing exchange on one of my servers. I had
> exchange 07 installed but it would not load in the MMC so I
> uninstalled it. Tried to reinstall it and get a message that the
> Global Data Catolog cannot be found.
> 
> I have aslo noticed that I cannot access Sharepoint which is installed
> on the same server.
> 
> Neither is in production yet but plan was to go live this week.
> 
> I have uploaded 2 files from the DC:
> ntfrsutl.txt - result fo running ntfrsutl ds on the DC
> dcdiag - result of running dcdiag on the DC
> I have also included the IP config files from the server giving
> problems and the DC.
> 
> Hope you can help.
> 
> Adrian
> 
> Windows IP Configuration from non-dc server
> 
> Host Name . . . . . . . . . . . . : oneview-share
> Primary Dns Suffix  . . . . . . . : oneview.ie
> Node Type . . . . . . . . . . . . : Unknown
> IP Routing Enabled. . . . . . . . : No
> WINS Proxy Enabled. . . . . . . . : No
> DNS Suffix Search List. . . . . . : oneview.ie
> Ethernet adapter Local Area Connection:
> 
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit
> Server Ad
> apter #2
> Physical Address. . . . . . . . . : 00-19-BB-CA-EB-3A
> DHCP Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 192.168.0.10
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 192.168.0.1
> DNS Servers . . . . . . . . . . . : 192.168.0.200
> ----------------------------------------------------------------------
> -----
> IPconfig from DC server
> Windows IP Configuration
> 
> Host Name . . . . . . . . . . . . : WINONEV-5OLAJCH
> Primary Dns Suffix  . . . . . . . : oneview.ie
> Node Type . . . . . . . . . . . . : Hybrid
> IP Routing Enabled. . . . . . . . : No
> WINS Proxy Enabled. . . . . . . . : No
> DNS Suffix Search List. . . . . . : oneview.ie
> Ethernet adapter Local Area Connection 4:
> 
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . : HP NC382i DP Multifunction
> Gigabit Serve
> Adapter #4
> Physical Address. . . . . . . . . : 00-25-B3-24-73-68
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
> Ethernet adapter Local Area Connection 3:
> 
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . : HP NC382i DP Multifunction
> Gigabit Serve
> Adapter #3
> Physical Address. . . . . . . . . : 00-25-B3-24-73-66
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
> Ethernet adapter Local Area Connection 2:
> 
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . : HP NC382i DP Multifunction
> Gigabit Serve
> Adapter #2
> Physical Address. . . . . . . . . : 00-25-B3-24-73-64
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
> Ethernet adapter Local Area Connection:
> 
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . : HP NC382i DP Multifunction
> Gigabit Serve
> Adapter
> Physical Address. . . . . . . . . : 00-25-B3-24-73-62
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> Link-local IPv6 Address . . . . . :
> fe80::e9b0:f977:59ec:e6cd%10(Preferred)
> IPv4 Address. . . . . . . . . . . : 192.168.0.200(Preferred)
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 192.168.0.1
> DHCPv6 IAID . . . . . . . . . . . : 218113459
> DHCPv6 Client DUID. . . . . . . . :
> 00-01-00-01-11-94-4D-6C-00-25-B3-24-73-6
> DNS Servers . . . . . . . . . . . : ::1
> 127.0.0.1
> NetBIOS over Tcpip. . . . . . . . : Enabled
> Tunnel adapter Local Area Connection* 8:
> 
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . :
> isatap.{E0C07D03-87A4-4112-B8DA-76C10B8B
> EDD}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> Tunnel adapter Local Area Connection* 16:
> 
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . :
> isatap.{E3C2CCA5-4AAC-47D9-8548-E43D6094
> A66}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> Tunnel adapter Local Area Connection* 13:
> 
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . : Teredo Tunneling
> Pseudo-Interface
> Physical Address. . . . . . . . . : 02-00-54-55-4E-01
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> Tunnel adapter Local Area Connection* 14:
> 
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . :
> isatap.{9855D098-460D-4FC7-BCD0-F6C0574A
> 304}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> Tunnel adapter Local Area Connection* 15:
> 
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix  . :
> Description . . . . . . . . . . . :
> isatap.{A16A655E-537D-4B01-A8FA-B2F02013
> 7A5}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> ----------------------------------------------------------------------
> -------
> http://forums.techarena.in
> 


0
Meinolf
12/29/2009 4:34:32 PM
"Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message 
news:6cb2911db81b8cc56c451250c40@msnews.microsoft.com...
> Hello abarber,
>
> On the DC disable all unused NICs. Also better use the real ip address 
> insterad of the loopback, even if that isn't the solution to your problem.
>
> Exchange should run on a member server for it's own.
>
> If you don't use IPv6 disable it:
> http://blogs.dirteam.com/blogs/paulbergson/archive/2009/03/19/disabling-ipv6-on-windows-2008.aspx
>
> There is a known problem when installing Exchange on Windows server 2008 
> if IPv6 isn't disabled.
>
> What exactly do you mean with "but it would not load in the MMC"?
>
> Best regards
>
> Meinolf Weber

I agree. I came across this issue back in March with a customer that has 
Exchange 2007 on Windows 2008. It was resolved by disabling IPv6 on the 
Exchange servers, as well as disabling the TCP Chimney function.

Also, the multiple interfaces on the DC are definitely problematic, and the 
loop back (as the other responder mentioned), should only point to the 
actual IP (192.168.0.200), and not the loopback. I feel the DC was setup, 
then left at default, hence why the loopback shows up.

That's a good article by Paul regarding disabling IPv6. Also, here is 
additonal info about RSS:

TCP Chimney and RSS Features May Cause Slow File Transfers or Cause 
Connectivity Problems
http://msmvps.com/blogs/acefekay/archive/2009/08/20/tcp-chimney-and-rss-features-may-cause-slow-file-transfers-or-cause-connectivity-problems.aspx

-- 
Ace

This posting is provided "AS-IS" with no warranties or guarantees and 
confers no rights.

Please reply back to the newsgroup or forum for collaboration benefit among 
responding engineers, and to help others benefit from your resolution.

Ace Fekay, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, MCSE & MCSA 
2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer

For urgent issues, please contact Microsoft PSS directly. Please check 
http://support.microsoft.com for regional support phone numbers.





I 


0
Ace
12/30/2009 2:37:06 AM
Thanks for the quick responses. 

Will take your advice on board. 

Discovered I was using the wrong version of Exchange hence it failed
with the could not find global catalog error. Installed the correct
version with SP1 and the installation has gone Ok. 

It was the Exchange Management Console that would not open that caused
the initial problem. Hence I reinstalled the software. Was still able to
retrieve the accounts setup initially but there is no emails in them
anyway. 

Will take the other advice on board and disable the NICs and IPv6 and
remove the loopback.

Adrian


-- 
abarber
------------------------------------------------------------------------
abarber's Profile: http://forums.techarena.in/members/168661.htm
View this thread: http://forums.techarena.in/active-directory/1287363.htm

http://forums.techarena.in

0
abarber
12/30/2009 10:04:47 AM
Reply:

Similar Artilces:

import the data to match the column titles in Excel
I have a large list of names, address and org. names in word 2010 how do I import that data to match the column titles? Hi Dan, Ideally, you'd have the Word data organised as a table, with the appropriate column structure. Form there it's a simple copy/paste operation. -- Cheers macropod [Microsoft MVP - Word] "Dan C." <Dan C.@discussions.microsoft.com> wrote in message news:4AF8382B-2D0B-44C6-BA81-9D0CC7325E68@microsoft.com... >I have a large list of names, address and org. names in word 2010 how do I > import that data to match the colum...

Outlook 2003 BCM and Exchange 5.5
Is Outlook 2003 BCM compatible with Exchange 5.5..? I installed it as an add on...and it doens't work. Any ideas/advice would be helpful. Thanx in advance. No, BCM doesn't work with Exchange. -- Aloha, -Ben- Ben M. Schorr, OneNote-MVP http://home.hawaii.rr.com/schorr **I apologize but I am unable to respond to direct requests for assistance. Please post questions and replies here in the newsgroup. Mahalo! "Jim C" <anonymous@discussions.microsoft.com> wrote in message news:ab0701c3b85a$d85fcbb0$a601280a@phx.gbl... > Is Outlook 2003 BCM compatible with Exch...

Sorting data #3
I have my data organized in columns based on state standards, and I want to regroup the data to get all Algebra questions together, all Geometry together, etc. Row 1: Question1 Question2 question 7 question 25 Row2: 6N1 7G8 5N15 6A9 Row 5-30 has student responses to the each question where N, G and A represent Number sense, Geometry and Algebra. I want to determine how the class did overall on each category. Thanks. -- I am pregnant with possibilities, and so are you! Jenai Your question makes perfectly good sense to you because y...

How Do I Pass Data Between 2 UserForm's
Greetings, I am trying to pass data from a TextBox on UserForm1 to a Label on UserForm2. At this point UserForm2 cannot see the TextBox on UserForm1. How can I accomplish this? TIA -Minitman If both forms are in memory, you can reference with Label1.Caption = Userform1.Textbox1.Text on userform2, or Textbox1.Text = Userform2.Label1.Caption on userform1 -- HTH Bob Phillips ... looking out across Poole Harbour to the Purbecks (remove nothere from the email address if mailing direct) "Minitman" <excelreply@i-m-p.net> wrote in message news:79ta10dqjvvuvda...

Exchange 2003 Recovery
Helo NG, at this time we`ve Problems with our Exchange 2003 Server. It has been deleted a single Mailbox without a Bricklevel Backup. Now the last full Backup is from April 15th and the DB Logs are from 05.05 until today. Is it possible to recover the Database with this Logfiles into a different ADS/Exchange Organisation ? any suggestions...... thx So you have a deleted mailbox and you want to get it back, correct? Have you tried to use the Deleted Mailbox recovery: http://www.msexchange.org/tutorials/MF022.html -- Mark Fugatt Exchange MVP http://www.exchangetrainer.com http://www.msex...

Auto-filter not grabbing all the data
Hi...I'm trying to filter through a database that has over 15,000 rows and not all the data is showing up in the filter. It seems to stop somewhere between 13321 and 13401. I've read through all the threads here and everyone is saying that the Auto-filter drop-down list is the only thing limited to 10,000 items but that it should filter the whole spreadsheet. Apparently not. Can anyone help, please?? Thanks.... I never let excel guess at the range that should be filtered. I'll always explicitly select my range. If your data has empty cells in it, then excel may no...

SBS 2003: adding Exchange services to Outlook 2003
On 3 out of 8 new computers added to the domain, I am unable to add the Exchange service to Outlook 2003 for the shared public folders and contacts. I receive the following message: "The action could not be completed. The connection to the MS Exch Srvr is unavailable. Outlook must be online or connected to complete the action." All other services are availabe to these "problem" users: One of these users was an existing user that received a new workstation; the other 2 users are new as are their workstations. Any thoughts? Thanks. Michael In news:1D0046BA-38...

excel 2002 data filter
hello this is the case if i have in column A data like this: http://www.abc.com http://www.cba.com http://www.abc.com ok. When i press select complete column A and then select DATA - FILTER - ADVANCE FILTER - UNIQUE RECORDS ONLY i get folowing result: http://www.cba.com this is not what i want. I want to get folowing result: http://www.abc.com http://www.cba.com u see what i meen? Can u help please and thank you very much!!! On Feb 14, 2:10=A0am, Ivanko <Iva...@discussions.microsoft.com> wrote: > hello > this is the case > > if i have in column A data lik...

Cannot see sample data
Hello, I've followed the exact instalation procedures of the sample data (creat AD users, run install wizard). The installation seems to be successful. I logged in under the sample data user, but could not see any data. The "announcements" section contains 4 articles, which mean it was added during the install using the wizard. What am I doing wrong? It's been so long since I have to install CRM 3.0 again, but I remember there is another step to configure so the users can see the sample data. Please advise. Thanks for your help. -- Regards, Andy Go to Settings ...

Data base web design
Can I use Access 2007 as database for my web site as I use MySQL "Jeff" <Jeff@discussions.microsoft.com> wrote in message news:78AB2033-4F7E-46C1-8458-C96E3B0E5AAE@microsoft.com... > Can I use Access 2007 as database for my web site as I use MySQL I think you're confusing the term database, and MS access. MS access is a tool that lets you build an application, and that application can connect to a database engine such as JET, or MySql. so it's not the MS access side that has anything to do with a web based system, it is the database engine you choose to use...

Exchange 2003 mount public db
Hi, I have Exchange 2003 SP2 on SBS Server. On of my customer losed old mail on a public folder and I need to restore emails. I have the database file that contains the emails but i wouldn't stop exchange mount the old db (DBOLD) create e pst of email, dismount the db and mount the official db. It's too dangerous! Then I reinstall the same machine on a server with the same domain, organization, Admnistrative group of Exchange. Dismount the original db and I try to mount the db of the other server (DBOLD). I receive an error like this: The information store could not be loaded bec...

Highlight Data
I'm trying to figure out a way to create an excel formula, or vba that will allow me to highlight rows of similar data. For example, I have the following information: .. .. BW404988 BW404988 M9610-3069S M9610-3069S M9610-3069S BM404701 BM404701 BM404701 BM404701 .. .. so I'm wanting a formula that would highlight the first two, then not the next three, then the next four. Does anyone know of how to do this? There won't necessarily be this 2, 3, 4 pieces of data. I'm trying to base it off of information found within column E. Thanks much, DJ You need to be more speci...

faxes from global address book?
using outlook 2002. i can send a fax to a contact in my personal address book because it comes up with the various options in the list like user (email), user (business fax), user (blah blah) etc etc... but when i want to do this from the global address book the options are not there (even though there is an entry for fax number in the global address book) also if i try and add the global contact to my personal address book, the fax number field is blank.. any thoughts>? ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usen...

How to protect a cell INSTANTLY the moment the data is entered!!
Hello, I want to know how to protect the cell at the very moment data i keyed in and entered without using the protection option in the tool' bar! I would like the process to be automatic!! for example: in cell B if i type in the word "king" and press ENTER! after this i must not b able to modify the word as the cell should be automatically protected if any one has a response to this please reply i would be eagerl waiting for it! thanx! Mot -- Message posted from http://www.ExcelForum.com You could do this by having the cell unprotected>entering the data>have a workshee...

choosing first instance of non zero data
how do i tell excel to count the number of cells until it reaches 3 zeros? Zip w.1 w.2 w.3 w.4 w.5 w.6 w.7 w.8 80001 0 3 2 0 1 0 0 0 start here | | End here Sheet 2: (output) Zip Count 80001 4 ...

Exchange 2000 Sending out old Emails When ever Exchange Service is restarted
I have a single exchange server that is sending out old emails whenever the Exchange Service is restarted. It is alwasy the same emails and they go to post inside and outside recipients. As long as I don't restart the Exchange Service, everything is fine. This has been going on about a month, but I need to spend some time getting it resolved now. Any pointers? I haven't turned up much in searching for myself. Thanks Jason- If you look in the folders for your SMTP Service, particuarly drop, queue, and pickup, are there old messages in there? By default this folder is in C:\program fi...

OWA hangs after moving mailboxes to another Exchange Server
After moving a group of mailboxes to another Exchange Store on another Server, clients cannot login to OWA. The OWA logon is successful but the mailbox never loads in the IE page. Clients with mailboxes on other Exchange Servers do not experience this problem. No errors are occurring onscreen or in the event logs. Any ideas? On Fri, 17 Feb 2006 07:58:32 -0800, JDavis <JDavis@discussions.microsoft.com> wrote: >After moving a group of mailboxes to another Exchange Store on another >Server, clients cannot login to OWA. The OWA logon is successful but the >mailbox never ...

Exchange 5.5 On W2K Services Won't Initialize
I have a Windows 2000 AD Server. Which has Exchange 5.5 installed on it. For some reason now the following services won't start. Exchange Event Service Internet Mail Service Message Transfer Agent System Attendant When I do try and start these services this error comes up: The application failed to initialize properly (0xc000007b) Click on OK to terminate the application. Then when I do this one comes up. Error 1053, the service did not respond to the start or control request in a timely fashion. In the event logs I get this as well Source:...

Global Address List #36
I have an issue [sorry if this is in the wrong place] with my install of ex2k3. Company wide we are using Outlook 2k3 as our client. When a user clicks on the Address Book they get all the details EXCLUDING the SMTP address, instead under the Email heading they get the full X400 details. The users assure me they used to get the SMTP address, and would look up colleagues details to give to clients. I preview the Address Books in ESM and they look fine as do the Filter Rules...in fact they are perfect in their, all of them. Thus my suspicion that it is a client problem [and not my issue]. ...

forwarding question for exchange 2k3
I have a new Exchange 2k3 server up and running. I am looking to add email addresses for folks in our sister company and route the messages to them. For example I wish to have johndoe@xyz.com (my domain) route to johndoe@xyz.de (sister domain). Can this be done without creating full mailboxes for those users? Thanks JP You can add Active Directory contact objects into your domain for the sister company. If there are shedloads you can consider using something like SimpleSync www.cps- systems.com to do regular synch ups between the two domains. If the two domains are only liked via the...

Pulling data from one cell to another
A column contains people's first name and last seperated by a comma. Ho can I tell excel to pull everything after the comma to B column an leave the first name in Column A? Thank -- inthewa ----------------------------------------------------------------------- intheway's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=672 View this thread: http://www.excelforum.com/showthread.php?threadid=26918 intheway, have a look at data text to columns, post back if you need more help on this -- Paul B Always backup your data before trying something new Please post a...

CRM and Outlook E-Mail exchange
Hello, we have some problems sending mail between members of our domain. When employee A (using Outlook) wants to send a mail to employee B (who is using CRM) the mail arrives at employee B's Outlook Inbox and never appears in the CRM. I figure that exchange does handle internal mail differently, is there any way to treat internal mail the same as external mail and deliver it both to CRM and Outlook-Inbox? Btw, we don't want to use SFO. Regards Tobias Internal Mail won't be handled by the exchange connector since it could only listen on the external smtp port..... Possible so...

Exchange mailbox recovery using Exchange DB files
I've shifted my Exchange 2003 machine to a new machine configured it and created all user accounts/mailboxes same as in old Exchange server and everything is working. I've all the Exchange DB files from old machine HDD i.e. .edb, .stm, ..log files as it is. But I don't have any type of backup using backup utility, but I have copy of all old Exchange files. How can I transfer mailboxes/mails from old machine to new one. I already studied Microsoft's Exchange 2003 Disaster Recovery Guide, and KB article "Offline Backup and Restoration Procedures for Exchange" ...

Excel data file format
How can I save a data set in *.xls format to *.asc, *.bin, *.wav,... Hi A macro like this will do Sub test() ActiveWorkbook.SaveAs ("C:\Temp\Opus1.wav") End Sub Don't expect too much from the orchestration though ... HTH. Best wishes Harald "Wordgeek" <Wordgeek@discussions.microsoft.com> skrev i melding news:05764254-B74B-4466-9327-21CB22E5FAA5@microsoft.com... > How can I save a data set in *.xls format to *.asc, *.bin, *.wav,... "Wordgeek" <Wordgeek@discussions.microsoft.com> wrote in message news:05764254-B74B-4466-9327-21CB22E5FAA5...

Glue/Lock cells to external data before refresh
I have a spreadsheet with a table of data which has been imported from an Access Database. If new records have been added on the database, then when I refresh the data in Excel it will add these new lines onto the spreadsheet. I need to be able to put certain comments in my spreadsheet against lines of data from the database. However, if new lines are inserted when I refresh the data, the comments can end up being next to the wrong record. Is there any way to keep my lines of comments attached to a particular record of external data, so they will move when the record does? ...