customizing quote merge template
I have 2 major problems that I just cannot seem to be able to resolve.
When using the mail merge template to do a quote it seems that there
are only a very limited range of "fields" that are made available to
the user. These DO NOT include the actual accounts "Address" only
shipping and billing address - 99% of our clients don't use these
address's so all our data is in "Address_line1" etc
Neither do the fields for "product description" appear in the list
only the products name. All our quotes have always included a short
four or five line desc...Outlook 2003 News
I am trying to setup the news reader in Outlook 2003. I follow the
directions but it won't stick when I drag news to go menu. Any ideas?
To get the News command back, go back to the Programs tab in Control Panel |
Internet Options and change the default newsreader to Outlook Express. If
OE prompts you to make it your default newsreader the next time you launch
it, clear the "Always perform this check..." box and then click the No
You may need to reset the Menu Bar and/or restart Outlook and/or reboot your
machine in order to complete the process. Not everyone is repor...Opening publisher 97 with a later version
I have publisher 97 on my windows xp and it works fine. However, I had someone refine some work I had done and apparently they used a later version of Publisher because when I loaded their CD, I got the message "Publisher cannot load files from a different version"
What can I do--does this mean I have to buy a later version to match the version he used, or do I have to buy one of those programs that can open other programs. If I do the later, will I be able to use my 97 version to make changes once I get the files open on the later version
http://www.mvps....help need with VC 6.0 IDE and mfc
First let me explain the scenario where i m using this requirement.
We are Using CustomAppWizard and designing a wizard .One of the wizard
pages will Insert Composite controls as many as the user wants .
1.So i should be able to dynamically insert ATL controls without using
Insert Control Dailog.
2. can any one tell me how to dynamically create Template file in
TEMPLATE folder of resource view .
3. I want to include many files created by templet files and add them
to build by editing newproj.inf
Is it possible to do this.
4.I would even like to know if i have 2 ifles in my C drive h...open two different Access reports
I was wondering if i can get some help here. I have two different reports
that i want to open when a user clicks a button to view the reports for
printing. Is there any way of popping them up at the same time in VBA?
Thank you in advance
>I was wondering if i can get some help here. I have two different reports
>that i want to open when a user clicks a button to view the reports for
>printing. Is there any way of popping them up at the same time in VBA?
>Thank you in advance
Yes. Call the DoCmd.OpenReport command twic...Unable to open Outlook Express after upgrade to Win. XP
I upgraded from windows98 to windows XP Pro. Now when I
try to use OE I get two error messages.
"Outlook Express could not be started. The application
was unable to open the OE message store. Your compter may
be out of memory or your disk is full.....0x800c012e,3"
"OE could not be started because MSOE.DLL could not be
initialized. OE maynot be installd correctly"
I found a similiar problem fix for window2000 which said
to delete OE, rename the old folder, then edit the
registry and reinstall. I did the above but was not
allowed to rename the old folder and th...Opening an *.MSG file with it's respective attachment.
The file *.MSG is a message file. This can be viewed by any editor, like
Notepad. However, when there's an attachment to it, we see garbage.
Is there a way to open the attachments present inside the *.MSG files ?
Yes, by opening it with Outlook.
Microsoft Office and Microsoft Office related News
Also Outlook FAQ, How To's, Downloads and more...
Tips of the month:
-Create your own fully customized Toolbar
-Creating a Classic View in Outlook 2003
Subscribe to the newsletter to receive news and tips & tricks in your
mailbox!...Outlook 2003 #79
I nhave recently purchased Office Professional 2003.
When using Outlook the send / receive function sometimes
does not work and I need to log off the computer and log
All configurations are standard and the email servers
have been verified by the ISP.
Does anyone else have problems with the stability of
Whenever I open Outlook 2003, I am getting a dialog box which displays the
Microsoft Office Outlook has encountered a problem and needs to close. We
are sorry for the inconvenience
When I click Debug it displays a message box with the following error
"The instruction at "0x3007e993" referenced memory at "0x0000000:. The
memory could not be read"
When I click No it Visual Studio JIT debugger pops up.
I uninstalled and installed several times but still the problem persists.
Is there any regsitry entry that I've to modify/delete?
...Canadian Mergers 2003
I have Money 2003 which will not allow me to preform a stock merger in the
Canadian format. Will upgrading to 2006 allow me to do this?
In microsoft.public.money, giff42 wrote:
>I have Money 2003 which will not allow me to preform a stock merger in the
>Canadian format. Will upgrading to 2006 allow me to do this?
Yes, with Deluxe there is a built-in function and above. It should
be able to convert your Money 2003 file automatically.
While there is not the built-in feature, here is how you could do it
in Money 2003 Standard, do it if you did not hold both stocks
involved in the merg...Outlook 2003 with XP SP2
IS there an issue with outlook 2003 running on a XP machine with SP2. I
am having connectivity problems. When I shut off the windows firewall, the
outlook client connects. some help please.
I suggest that you add outlook2003 to the Windows Firewall exception list.
"stonefly" <shitij_T@hotmail.com> д����Ϣ����:OAoct1k5EHA.4028@TK2MSFTNGP15.phx.gbl...
> Hey guys,
> IS there an issue with outlook 2003 running on a XP machine with SP2. I
> am having connectivity problems. When I shut off the windows firewall, the
> outlo...Filters in Excel 2003
I am using Filters in Excel 2003.
Every cell in sheet B is linked to every cell in sheet A. That way I
can alter data in B without corrupting the original data in A. I then
highlight the cells in B that I want to assign a filter to and select
Advanced Filter. I have no criteria so I do not set that. I click OK.
I then select Filter again and this time select Auto Filter. Drop
down arrows appear at the top of my columns. Great, no problems so
far, I then select from the drop down list the criteria that I want to
filter. Again no problems, my list filters correctly.
But once I have do...HELP Recovering addresses and email from Outlook 2003
I had some serious driver issues that required re-installing XP from
disc. I did use the backup option and have a backup of all the old
data. And of course had to reinstall Office 2003.
Will third party software restore my old email and addresses or am I
out of luck?? Thanks for the help
> I had some serious driver issues that required re-installing XP from
> disc. I did use the backup option and have a backup of all the old
> data. And of course had to reinstall Office 2003.
> Will third party software restore my old email and addresses or am I
> out of lu...Need Help with Deleting Empty Paragraphs in Word 2003
I have written the code below to delete all empty paragraphs at the end of a
document and then place the cursor at the end of the last paragraph.
It works fine as a stand alone sub in a new doc, but fails inside the real
document that contains other code that manipulates several documents.
The failure is that it will delete the last empty para, but then gets stuck
looping inside the While...Wend because subsequent .Delete are not happening.
So, the question is why would this work in one document, but then fail in
n = 0 ...Office 2003 Service Pack 3--subsequent problems opening Publisher
I run Publisher 2003 on Windows XP. On June 13, I updated my system with
Office 2003 Service Pack 3 so that I could open Word documents with the file
ext docx. Subsequent to the Service Pack 3 installation, whenever I open a
Publisher file (which I created), I get the following message: "Publisher has
detected a problem in the file you are trying to open. If you are certain
that this file came from a trusted source and does not contain harmful
information, click OK." What is causing this and is there a way to stop this
Error message when you...Using Access 2003 on client to see Sharepoint 2007
Testing a Sharepoint environment and I can easily manipulate and run the
database from Access 2007, but when I try to use Access 2003 it wants me to
save the database to a location. The Access 2003 has the compatiblity pack,
but it seems to not work when I download it.
So the question is using Sharepoint 2007 and posting the Access 2007 format
to it, can a user go to the sharepoint site and use a 2003 Access database
that has the compatibility pack and open without having to download it?
Message posted via http://www.accessmonster.com
Send check for $500.00 to: David A Jenn...Outlook 2003 Out of Office Reminder RPC over HTTP
I have some remote office users that have Outlook 2003 configured
using RPC over HTTP. They do not get the notice that pops up
reminding them that their Out of Office is on when they open Outlook.
Is there a way to get this to work?
...opening .pst archives
I am trying to open an outlook e-mail archive file (pst)
that was made when I had Office 98 and transferred to my
new computer (Office 2003 Pro).
I am looking for an old e-mail that has now become
evidence in a lawsuit.
Can anyone help?
You didn't say if the PST file was on a CDR/RW, hard drive, or network
share. In any case, the PST file must be located on a local/network drive
where you have full access (read, write, modify, delete, .etc) rights. Once
the file is located in said place, you can open the PST file via File | Open
| Outlook Data File. To close the PST file when you ...opening a .docx with word 2004
Operating System: Mac OS X 10.3 (Panther)
How can I open a .docx attachment that has been sent to me with word 2004?? Can I convert it somehow at my end or does it have to be converted from the sender end?
Thanks for any help...
> How can I open a .docx attachment that has been sent to me with word
> 2004?? Can I convert it somehow at my end or does it have to be
> converted from the sender end?
Make sure that Office is up to date (or at least in version 11.5.0 - the
altest version being 11.5.1) and install the XML convertrs you'...Excel Opens Without Displaying Workbook
I am having issues with opening an Excel file. The file opens, but the workbook is not displayed. I tried the resolution in the article XL97: Excel Opens Without Displaying Workbook (http://support.microsoft.com/default.aspx?scid=kb;en-us;158996&Product=xlw97), but neither of the resolutions fixed the problem. Any suggestions??
Are you using Excel 97?
Fort Collins, CO
>I am having issues with opening an Excel file. The file
opens, but the workbook is not displayed. I tried the
resolution in the article XL97: Excel Opens Without
Di...Outlook 2007 Calendar -> Outlook 2003
In the past I could forward appointments and birthdays from one PC to
another, if both PC's had Office 2003. I just tried forwarding a birthday
from Outlook 2007 to Outlook 2003 and it doesn't work. I get the email in
2003. Open it, open the calendar item, then click on Save & Close. No
error message. But it's not there. Neither in the current month or for
next year. I forwarded it as a reoccurring item, that's the only way it
will let you do that.
Has anyone else been able to do this?
Or, is this a backward compatibility issue?
It's odd.... this works fine for...PDA-Outlook 2003
I have a Jornada 540 and I try to sync to outlook 2003
using Activesync 3.7. I get the message Outlook is no
longer installed. Reinstall MS Outlook.
This happens on both Exchange and Outlook 2003
Appreciate your help
...Need HELP! for Linking data
Could someone please direct me to where I can learn how to link date in a
work book. i.e., I have individual pages for each subject but I need the
data that is entered in these individual pages to transfer to the Master
without having to manually in put it.........TNX
There are not too many bits about linking worksheets or workbooks that I can
But have a look at the links below, in case they give you the information
I think it is frustratingly one of those things which is very easy when you
know how, or if you can get someone to actually show you, but if you hav...Effectively stoping open relay.
I have a client who started using exchange 2003 few days back. This client
is having more than 12 subnets starting from 172.27.50.0, 172.16.0.0 to
172.27.0.0 and 10.172.172.0 & 10.172.173.0 subnets in different location in
town which are conneted by DSL. This users are connecting to the Exchange
Most of these users are POP3 users.
I have 2 SMTP Virtual Server running. Default SMTP Virtual server
172.16.5.25 and the second for Externel.
In the Mail connector I have added only the external as the local bridgehead
In the relay properties of the internal I...Merge code issues with Publisher 2003
It seems whenever the data source is altered, the merge code fields have to
be reinserted in the Publisher document. Is this normal?
The data source starts in Excel and is then saved as a .txt file to retain
number formatting on final merge.