eseutil can't run
I need to run the eseutil on my excg.5.5 server,windows 2000 offline. The
problem is that the priv database is 57gb, but i only have 30gb of free space
on the same drive. the other drives have even less space. can i point the
eseutil to a different server with more space so it can run? What would be
the syntax i would use if this can be done?
That would be the /t and /f options.
If your doing a Defrag you'd do something like the following...
eseutil /d PRIV /t\\server\bigshare /f\\server\bigshare
/t is the location of the temporary database
/f is the location of the temporary strea...How can you enable a combobox to be "tabbed" or entered out of?
I am trying to allow users to tab in to a combobox and then tab/enter out
after a selection is made. Right now you have to use the mouse to enter the
combobox (tabbing goes to the cell underneath it) and after you make a
selection, its like you're stuck in the box - you can only get out by using
the mouse or pressing escape (which then brings you to the last cell you were
in). Is there a way to fix this?
...To get user training manual for Microsoft CRM 3.0
I am implementing Microsoft CRM 3.0 for an health care company in Michigan.
Right now I have experience with installation, customizing and CRM
application functions for 2 years.
In the future I would like to pursue my future as a Microsoft CRM
consultant. Thus, I would like to get all 3 of certificates of Microsoft CRM:-
3. Installation and Configuration
The problem I have is I work for a company which I am not permanent
employee, and this company is not Microsoft Partner also. So If I would like
to have user manuals for preparation to ...Getting Combo boxes to change options based on other Combo boxes.
Using Excel 2007. I am trying to create either Form Control Combo Boxes or
ActiveX Combo Boxes that will change the selectable options based on
selections made in previous combo boxes. I am having a hard time finding any
information that will work for me. Can someone tell me how to make 5 combo
boxes change available listed options when specific options are selected in
another combo box? Please? I've been working on this for a very long time
without success. I've tried using Data Validation, but my formulas are too
long for all the different possible combinations.
You are...How can I customize the right-click context menu in Word 2007
I use cut & paste of imported text a lot in both Word 2007 and Excel 2007. In
Excel the right-click context menu includes Paste Special; in Word it does
not. How can I add Paste Special to the Word context menu?
Hope this helps,
Doug Robbins - Word MVP
Please reply only to the newsgroups unless you wish to obtain my services on
a paid professional basis.
"Steve Samson" <SteveSamson@discussions.microsoft.com> wrote in message
news:A20FD91E-CFE2-402A-8A54-9F58880A3126@micros...I can't see the image picture from the manager program
Using the Manager - Item Properties - Special Tab
You can select the picture files that reside in the associated folder
that is set by the Adminastrator - paths - pictures - folder location.
The files sit on the backoffice PC and
I can see the selected picture in the little window, via the Manager
program no problem.
At the Inventory PC, I set the Admin program to look at the server and
file paths are set.
I can see the picture files and select them but no image shows up in
the little window.
Anybody got any ideas what is causing this?
Register is looking local for photos, needs to ...Can I use Rule to move digitally signed messages to separate folder?
Is there a way to move digitally signed messages to a separate folder using
a Rule? Other options for segregating digitally signed messages?
Thanks in advance.
deko <email@example.com> wrote:
> Is there a way to move digitally signed messages to a separate folder
> using a Rule? Other options for segregating digitally signed
I don't see that as a selection criterion in the Rules wizard.
...Can't send large attachments
I can't seem to find the place in Outlook to change the size of outgoing
attachments. My ISP has a 10mb limit but Outlook seems to balk at anything
larger than 2mb.
Nadyne on MSN Messenger
Cable/DSL or dialup? If Cable/DSL, are you behind a router (Linksys) that
lets you share a single IP address with many computers?
"Nadyne Nelson" <firstname.lastname@example.org> wrote in message
> I can't seem to find the place in Outlook to change the size of ...How can I access a file in Outlook Public Folder by VBscript
It does not have to be VBscript..
I need sync the file with my local harddrive...
> It does not have to be VBscript..
> I need sync the file with my local harddrive...
Why does it need to be a script at all? You can add your public folder to
your PF\Favorites (drag it there) and include it in your send/receive
settings for offline use with your OST file.
...can you date time stamp entries in excel
is it possible that when someone puts an entry on a shared worksheet in excel
it can automatically date and time stamp their entry.
Private Sub Worksheet_Change(By Target As Range)
On Error GoTo ws_exit:
Application.EnableEvents = False
If Not Intersect(Target, Me.Range("A1:H10")) Is Nothing Then
.Offset(0, 1).Value = Format(Now, "dd mmm yyy hh:mm")
Application.EnableEvents = True
'This is worksheet event code, which means that it needs to be
'placed in the appropriate ...Can't find CD/DVDdrive
My DVD drives have disappeared. they don't show as hardware in control panel.
Working fine yesterday - no software changes made.
Both have power to them. I've unplugged everything and put a new lead from
them to the motherboard.
Doesn't appear to be anything physical.
Followed various posts on this site. Mr Fixit recognises the problem but
can't fix it.
Went into registry. Higher filters there but no lower filters.
On 06/20/2010 05:13 AM, Philx5 wrote:
> My DVD drives have disappeared. they don't show as hardware in control panel.
...How do I get the document to align with my labels?
I keep trying to print these labels, and they end up wasting because the
alignment is off. I am using the right number labels along with the
application, but for some reason it's not working. My printer is a F335
All-In-One. Please advise. Thank You.
Extremely difficult without seeing them. But 99% of the time it is because
normal.dot has been modified by adding a Header or Footer or similar and
labels are based on normal.dot. So try starting Word in Safe Mode and create
a sheet of labels to see if that works. If it does, rename normal.dot as
normal.bad and start Word agai...Can't display all text in cell
I'm trying to display text in a cell. I've got Wrap Text on, and I hav
several paragraphs of text. All of it appears in the formula bar, bu
not in the cell displayed on the screen. And yes, I increased the ro
height, but it still doesn't show.
Message posted from http://www.ExcelForum.com
I am having the same problem. Apparantly there is a 1024
character limitation per cel in excel. The only advice I
have received so far, which does work, is to press
alt+enter to create a line break. If you find another
work around, I would be interested.
besid...Pivot chart: get rid of zeroes?
I have created a pivot chart using a pivot table.
However I want the zeroes to be NULLs so they are displayed on the graph.
Unfortunately I cannot see how to do this; could someone please help? I
have tried the Table Option checkboxes in the bottom right corner to no
Sorry, that should read NOT displayed on graphs
"Phil Davy" wrote:
> I have created a pivot chart using a pivot table.
> However I want the zeroes to be NULLs so they are displayed on the graph.
> Unfortunately I cannot see how to do this; could someone p...Using Drop Down box that can be edited
I have created a form in Word 2007, but would like to have the drop down box
I created to also be overwritten by the user if the items in the drop box
doesn't include their choice. Thanks
One possibility would be to replace one of the items in the list with a user
input item. You could do this with a macro run on exit from the dropdown
Assuming the dropdown field Dropdown1, put an item at the end of the
dropdown list "Enter your own value" then run the following macro on exit
from that field
Dim sChoice As String
Dim fDD As FormFie...How can I rid off a group excel document?
Do you mean [Group] in the title bar.
Rightclick on a worksheet tab and choose Ungroup Sheets
...Can message journaling be done on a single mailbox in Ex2000
Can message journalling be done on particular mailboxes.
Or is there any other way to get copied all outgoing & incoming of
PARTICULAR DEPARTMENT employees to its manager's mailbox.
Thanks in advance
"Ravi" <email@example.com> wrote in news:1108009914.921986.318760
> Can message journalling be done on particular mailboxes.
> Or is there any other way to get copied all outgoing & incoming of
> PARTICULAR DEPARTMENT employees to its manager's mailbox.
You'll either need an event sink or a third...Still can't post Attachments. Someone please Help !
ZXQnLCBQcm90b2NvbDogTk5UUCwgU2VydmVyIFJlc3BvbnNlOiAnNDQxIFBvc...Inactive Salesperson ID
Why does GP allow us to enter an inactive salesperson ID in the Customer
Maintenance window but not in the Customer Address Maintenance window? It
should not be allowed in either one. Or, it should at least give a warning.
...how we can retrieve the value of edit control of combobox.
hi guys, how r u, can you please tell me how we can retrieve the value
of edit control of combo box. actually i want to allow the user to
input data in the combobox and then save this data in the database. i
don't want to select already exist data in list box of combobox.
please help me.
> hi guys, how r u, can you please tell me how we can retrieve the value
> of edit control of combo box. actually i want to allow the user to
> input data in the combobox and then save this data in the database. i
> don't want to select already exist da...why can't I send unless in reply to existing emails
I cannot send emails unless I reply to existing ones, even to those in my
contacts. How do I sort this problem
"Jeanius59" <Jeanius59@discussions.microsoft.com> wrote in message
> I cannot send emails unless I reply to existing ones, even to those in my
> contacts. How do I sort this problem
Any error message when you do try to send? Outlook version? AV program?
Windows version? You know, just little details....
> I cannot send emails unless I reply to existing ones, eve..."Can't Create Backup FIle. Save [filename] Without Backp?
I get the following message every so often when running
Excel 2003 under Win XP:
"Can't create backup file. Save [finename] without backup?"
I respond: "OK"
"Your changes could not be saved to [filename] because of a
sharing violation. Try saving to a different file."
I respond: "OK". It presents me with the standard window
allowing me to enter a new filename, which I do, then press
OK. Then I get:
"Do you want to save the changes you made to [fileename]?
I respond: "Yes"
"Document not saved."
This is VERY annoying. I am t...Why would m_pSiteFocus get corrupt?
I have an app with a view that hosts windows media player (CWMPPlayer4).
The player is occasionally removed from the screen (using
ShowWindow(SW_HIDE) and MoveWindow(CRect(0,0,0,0), FALSE) and then put back
(using the same functions as during the removal but with different param
On odd occasions I get access violation in the view's OnWndMsg(). When
this happens I can see in the debugger that m_pSiteFocus of the view
(control container) is not valid ( the pointer value seems to look OK but
its content is simply garbage).
Would anyone have any idea why this happens?
Thank...Can anybody tell me how this works?
Set fileObj = CreateObject("scripting.filesystemobject")
fileObj.CopyFile strBackEndName, strBackupName, True
That sets a reference to FSO (File System Object), which is part of VB
Scripting. It then uses FSO's CopyFile method to make a copy of the file.
Now, since I was reading another thread you have going, I'm guessing you
want to use this because it doesn't give you the "File In Use" error you're
getting through other methods. Be aware that just because FSO's CopyFile
method will copy a file that's in use, that doesn't mean it...Can my form fill in a field, yet allow me to override?
Each customers is sent to us from a salesman, and we provide service for 1-7
days before the activity ends. A new charge is generated for each day of
Employee #1 uses the customer service form to generate a bill, and includes
the name of the salesman. Employee #2 uses the form to generate a bill on
the next day, and has to look up the first bill, in order to know which
salesman to record. The same thing happens every day until the activity ends.
With each new referral for service, there's a strong chance it will be due
to a different salesman, so the customer number an...