I have a worksheet with some cells in a column blank. Where that happens I
want to replace the blank with whatever is in the cell directly above, at
least within a range. I've looked around here and in Excel Programming and
there seems to be an idea to put the formula "=R[-1]C" in those blank cells.
I try, but I still get the formula even when I F9. If I use "=" followed by
the id for the cell above it works, but not this relative addressing.
Any thoughts appreciated.
You need to be in R1C1 view for this, Tools>Options>General.
But, it is just the same ...msdev.exe and devenv.exe
is there not msdev.exe in vc2008? does devenv.exe have the same function as
msdev.exe?is there any difference? thanks!!!
"aigrubby" <firstname.lastname@example.org> wrote in message
> is there not msdev.exe in vc2008?
>does devenv.exe have the same function as msdev.exe?is there any
Yes. msdev.exe is IDE of VS6 and devenv.exe is IDE of 2008.
I've started using the aqadmcli.exe tool and love it, but was wondering
if there was a way to delete queues that are older than two days. I
want to set it up so that it runs automatically everyday, but I don't
want it to delete all queues just the ones that are older than two
days. Does anyone know what I would need to type in to do this? Thanks!
...how to recover files from drive C after it is reformatted.
I had had my computer reformatted because it was so slow.
Not knowing, the IT personnel did not backup copy the
files from drive C. My outlook files was there, now I
could not get hold all of my previous e-mails.
Is it possible to recover those files after my pc was
You would have to talk to a data recovery expert
"Ian" <email@example.com> wrote in message
> I had had my computer reformatted because it was so slow.
> Not knowing, the IT personnel did not backup copy the
&...12 Xyzu Hokkaido Scenery Wallpaper.exe (7/7)
=ybegin part=7 line=128 size=1593896 name=12 Xyzu Hokkaido Scenery Wallpaper.exe
=ypart begin=1497601 end=1593896
��&�S�F6����3���/;^�n�x��=J���>�$��H���WK�\�-�v�+:dyw�=J��A���n���J-����J�ha...MFC71 in Visual C++ 2005
I'm working on a program which was previously compiled on VC++ 2003 using
MFC71, it compiles well on VC++ 2005 using MFC80. I'm wondering if there is a
way to still use MFC71 and compile/link against this latest on instead of
Thanks for any Hint.
Overall, this usually results in serious problems, because you have to redirect so much to
make it work. This is very difficult or impossible. Otherwise,we'd all be using VS6 and
compiling with the VS2008 compiler.
On Wed, 22 Oct 2008 10:36:22 -0700, jasmo68 <firstname.lastname@example.org> wrote:
...pure virtual function call iexplore.exe runtime error
sometimes i get a runtime error named "pure virtual function call" from the
my website i.e. it depends heavily on scripting. but i think it has
do with the transition technology build-in the ie that i use (Interpage
Transition with directx).
If someone knows what this is, suggestions are appreciated...
Thanks in advance...
thank you for the information, but how can this occur within the internet
seems to be a bug or s...Ctrl+C
I am trying to get selected text from active window.
I used 3 different ways for this:
3. sendmessage with WM-COPY.
I want to copy selected text to the clipboard by using Ctrl+C.
It works fine for notepad but not office word or I.E...
What should I use instead of simulating the keystroke?
The answer is, in general, you can't. The SendMessage (better: PostMessage) of WM_COPY to
the correct window (note that in Word, sending this to the top-level frame doesn't do any
good because the top-level frame doesn't have any text selected) is p...output.c error in multithreaded program
My multithreaded program is occasionally crashing. I tend to get several
types of crashes (I think) as the call stack often looks different and I'm
finding them a real pain to track down
Anyway the "current" one crashes in output.c. When I look at the file
description it states
**** DOESN'T CURRENTLY DO MTHREAD LOCKING ****
So, how do I get around this?
I'm not sure where output.c is called in my program - this is the earliest
entry on the call stack (it goes from top to bottom earliest bottom right?)
Anyway most of the other entries are for ntdll.dll which I ca...Using C# dll as COM in an MFC application
I have written a C# dll in VS2005.
One interface and class are exported using Interop Services.
I want to use this c# dll in my MFC application, using VS2003.
It compiles after I imported the dll to my MFC app.
On runtime I get class not registered HR error in my MFC project.
I use the code as follow:
_NewActivationPtr myActivation = NULL;
HRESULT hr = myActivation.CreateInstance(__uuidof(NewSupernaActivation));
I don't what to do.
Do I have to use GACUtil to register?
If I want to use GACUtil do I have to sign my project?
Trying do it had failed, because my third party librar...Exchange 2003
I have a Windows 2003 server with SP1 and Exchange 2003 server, SP2 which
recently started using a lot of cpu on the inetinfo.exe process. I have not
changed anything on the server recently other than the fact the recent
Microsoft security updates were installed. If I restart IIS, it will drop to
normal for a while. Then, slowly, cpu use gets higher and the inetinfo.exe
memory begins to grow until the cpu gets to about 90% or so causing the SMTP
process to stop responding.
I have checked several things. I turned off the systems Symentec AV on the
/system32/inetsrv and all exchange fol...services.exe error trying to shutdown cmputer after boot up
Services.exe was trying to shutdown my computer after boot up. Could someone
On Mar 13, 2:32=A0pm, "Steve Miller" <misterblue...@hotmail.com> wrote:
> Hello ng,
> Services.exe was =A0trying to shutdown my computer after boot up. Could s=
> please help?
> Kind regards,
To prevent chasing the proverbial wild goose, please perform the
following, then we can properly investigate if you still have issues:
Download, install, update and do a full scan with ...Exchange5.5 sp4 and O.W.A.
Hi to everybody,
I'm experiencing such problems in my environment configured as follows:
- WinNT4_sp6 domain
- Exchange5.5_sp4 on a WinNT4_sp6 server.
- OWA installed on a different server with WIN2kServer_sp4.
Event Type: Information
Event Source: DrWatson
Event Category: None
Event ID: 4097
The application, inetinfo.exe, generated an application error The error
occurred on 11/14/2004 @ 11:14:37.046 The exception generated was c0000005...Outlook 2003 B.C.M. address book doesn't function
Several weeks ago a client contacted me regarding an issue that had
developed on one of their workstations. They have Dell Dimensions that came
with Microsoft Office 2003 w/BCM installed. However when the office manager
installed an older copy of MS ActiveSync 3.x on her workstation, she also
inadvertently installed Outlook XP. As you can imagine that caused major
problems so I had to stop by their office and uninstall anything pertaining
to Outlook, reinstall, get the MS utility to clean up installer files.
Finally after an hour everything began working normally.
Howeve...Why VC++ ,Why not C#,VB for windows applications
This question is haunting me from the day I sarted my new project .
I have been deveoping a windows based application using VC++,MFC and
as we all know its tough in MFC for backgrund colors of GUI .I have
never done a project in C#,VB
My question is
1.When this is very easy in C# ,WHY still prefer MFC?
2.What advantages does programming with MFC have over C# if I ever
build the same Windows application?
3.What advantages does programming with MFC have over VB if I ever
build the same Windows application?
4.What is MFC Winforms? How far this is different from traditional MFC
...C# call to ActiveX(written by MFC)
If i have a activeX which is written by MFC, and i put it into the C#
container(Program) and when i use the thread in the ThreadPool
(BackgroundWorker) to call the ActiveX function, it seems that the
called function will switched to another thread (Not the same thread
in my C#) program, anyway to prevent it? And what thread will be used
when called into the ActiveX function?Thanks.
> Hi All,
> If i have a activeX which is written by MFC, and i put it into the C#
> container(Program) and when i use the thread in the ThreadPool
> (Backg...How to encrypt and decrypt a C data at run time
I need to encrypt a C data file(Filled structure data and int, enums).
and make a bin file. The at anypoint of time i've to read this .bin
file and have to decrypt and have to read the structure ad enum values
So, any help on writing an encryption and decryption methods can do for
Quick help Would be great , sample encryption/decryption code will also
be a grt help.
I've never used them, but there's CryptEncrypt() and CryptDecrypt().
Help for CryptEncrypt has a link to example programs for encrypting and
decrypting a fi...How do I retrun a BSTR from C++ to VB.NET
I have a C++ function in a DLL of the form
BSTR WINAPI DoSomeWork(LPCSTR szConnection, LPCSTR szGUID)
I use SysAllocStringByteLen to return a BSTR.
For the most part this works accept when the calling applicaiton tries to
free the BSTR and I get a RtlFreeHeep error. I'm guessing because the bstr
has been allocated in one dll and it being released in another.
So how do I allocate the bstr that I'm returning ?
"Michael Tissington" <email@example.com> wrote in message
news:ed%23pPv1gFHA.3312@...transfer shares from one a/c to another, lose history
To transfer shares from one investment account to another, which is the
best option to use? I have been using the transfer out option, but by
doing that, all the transaction history is lost. Is there a way to
It's still preserved in the original account.
"ab" <firstname.lastname@example.org> wrote in message
> To transfer shares from one investment account to another, which is the
> best option to use? I have been using the transfer out option, but by
> doing that, all the transaction history is l...How to Send / trap Ctrl + X, ctrl +V, Ctr+C messages in MFC?
I have an Dialog based application which has Flash activeX. inside
flash window i hav a flash text box if i do cut,copy or paste using CTR
+X, CTRL+V etc it does coy paste etc... now i have to handle these
operations via a menu how i can get control over this since editbox is
of flashactive X
How i can send a message like ctrl+X CTRL+V etc in MFC ?
If Flash offers an object model, I would use that. If not, try focusing on
the control and then use SendInput.
"Kishore" <email@example.com> wrote in message
news:2ce92699-88be-4c8a-b0f2-bb30d878f203@n22g2000prh....xsd.exe and code generation
I have three xml schemas, one schema contains types that the other two
referance. When generate code for each of the schemas, all three cs files
contain the types that are part of the common schema.
Currently I am going through the auto generated code and removing the common
types, with the help of the compiler since they are all in the same
Aside from listing all the types I want generated in each of the other two
schemas, as I may add more in the future and don't want to forget to add to
the list, is there a way to get XSD to not generate the common types for the
other two ...OT: Look mom I can do C#
Starting to play around with C# a little more seriously.
LOL. You are now a traitor.
Winforms is forzen. WPF is the new baby now.
"AliR (VC++ MVP)" <AliR@online.nospam> wrote in message
> Starting to play around with C# a little more seriously.
Winforms are NOT frozen, they are sill there!
WPF is the next step, but under the hood, everyth...Visual C++ 6.0, Vista, Drag'n'Drop and evelation...
Okay, I give up... what am I missing here ?
I have a variety of Visual C++ 6.0 projects, and all of them seem to
compile and run in Debug mode quite happily under Vista Premium.
However, one - just one - of them, refuses to run in Debug or
Release mode. I can run VC++, compile this project, but when I
try to run the .exe, VC++ pops up an error:
Could not execute: the requested operation requires elevation.
(Win32 error 740)
I've tried lifting my laptop off the desk, and recompiling it, but this
doesn't make any difference.
(That was ...Form C++ Forum
Which forum should I post requests to for c++ form info.
Investigation forms server in c++ and have the sample working but which to
ask some design questions - should I post here??
Answers on a post card please :o)
There is a newsgroup specifically for general Outlook programming issues =
"down the hall" at microsoft.public.outlook.program_vba or, via web =
interface, at =
Or if you're building an Outlook add-in use =
Sorry about the offtopic message.
I have an old exe (16 bit). Don't have the source. I want to step throught
the exe. I tried loading it in VS 2003 and even 4.1 but couldn't get it to
I remember doing that with exe's back in DOS days. Opening the exe in TASM
and stepping through the exe.
Does anyone know of a program that will let me do this?
"AliR" <AliR@online.nospam> wrote in message
> Hi Guys,
> Sorry about the offtopic message.
> I have an old exe (16 bit). Don...