RPC over HTTP
I am trying to setup RPC over HTTP service on a Windows 2003 Enterpise
server SP1 running Exchange 2003 Service Pack 1
I have installed the RPC over HTTP service
I have installed the Certificate Authority and issued a certificate to the
web site containing the Exchange features.
Everytime you visit the https:// site and you install the certificate, you
prompted the next time you visit the site again.
Its seems that the certificate will not install correctly, this causes
Outlook not to connect.
any help or tips will be much apperciated.
My Link with the certificate https://www....Removing hyperlinks in Excel by multiplying by 1 is very obtuse
I just followed the Excel help directions for "Remove a hyperlink" ->
"Deactivate several hyperlinks at once". And while the directions work
(multiplying each field by 1), they strike me an obscure work around to a
rather obvious missing feature. It should be easy to remove hyperlinks from
text in Excel, especially because Excel is very agressive about auto-creating
hyperlinks when any text that resembles a web address is entered. Hopefully
this missing feature will be addressed in the next verison of Excel.
post your suggestion to:
Reg...Messages stuck in Queue with status Active and eventually fail.
I have an exchange 2000 server with SP3. The scenario is this; Everything
has been functioning great except emailing to AOL, so I setup a smart host to
use our ISP's smtp server. Well, they are getting flagged as open relay and
the mail is rejected. So I had them setup a reverse dns lookup for our IP so
I could send mail directly.
I found a site that allows me to check RBL's and we came up good on about 25
of them, so we aren't black listed.
Now we can email aol users without any problems, but all of a sudden, I
can't get the server to deliver mail to other exchang...Job Listing- VC++ MFC with Isofttech
Position: Technical Lead
Experience: VC++/C++ with MFC
Good to have: Wireless 802.11 Skills & Windows development experience.
5-6 years of experience.
Work Location: Chennai
Education: BE/B Tech, ME/M Tech ( CS,IT,ECE,EEE)
Do send in your CV to
...Best book for learning MFC/VC 7.1 for developing rich GUI apps ?
I am a C/C++ developer of quite a few yesrs, although I am relatively
new to Windows (Unix background). I am about to begin work on a project
that would require me to develop several GUI rich frontend applications.
I would like to hear from developers ou there if there is a book they
would recommend, to help me hit the ground running - i.e. a book that is
NOT an introductory text on programming/C++ but rather one that dives
straight in and shows how to create front ends (possibly widgets etc) -
using the VC IDE, one that covers all I need to know about MFC to start
working on a re...Strange Error (CRM 1.2)
I have a Virtual PC configuration set up for CRM demos. I have one image
that has CRM 1.2 under Windows 2003 server. It is all configured and setup
and running fine. I have another image with Windows XP configured. The
two images see each other and communicate.
From my Windows XP image I can access CRM both via browser and Outlook
Client. However, occassionally I can't access the system via Outlook and
when I try it via the browser I get a screen coming up with "Sonic Wall" on
it asking for a login and password. If I enter in "Administrator" for the
login...trying to split a stock 1:4
When I were trying to split a stock using Money2000,
Money2000 ended up telling me: "The stock split can not
be completed due to a lack of disk space." But I still
have 18G left on my hard disk.
In microsoft.public.money, Wei wrote:
>When I were trying to split a stock using Money2000,
>Money2000 ended up telling me: "The stock split can not
>be completed due to a lack of disk space." But I still
>have 18G left on my hard disk.
I would try booting into Safe Mode and see if you can do the split.
I don't expect it to solve the problem, but it is ea...mpweb.dll and keyhook.dll
I ran a Spyware program and it listed these two dll's as key logger's and
that I should remove them. I did a search on Google and it confirmed that
Keyhook.dll (which is located in the Microsoft Money SYSTEM sub-directory
along with mpweb.dll) is a key logger.
I am asking for the expertise of the group to help me out here because I
don't know if these dll's are good or bad dll's for sure.
Thanks in advance for your help!
In microsoft.public.money, Andy wrote:
>I ran a Spyware program and it listed these two dll's as key logger'...Question about CRM and Great Plains Integration
Can I create invoice when I invoice a contract in CRM and then show the
record in the Great Plains ?
Thanks in advance
(Office XP Pro with 3rd Update and WINXP Pro)
After clicking "Send and Receive," I get a red "X" error
message "You don't have appropriate permission to perform
The account tests OK under the Tools-Email Accounts tab
This account used to work perfectly. This error occurred
some time ago now and I have never found a fix. I cannot
associate it with any particular change with my system.
WIN USER 1 - administrator account (Outlook works fine)
WIN USER 2 - limited account (Outlook gives the above
error but the email acct tests O....NET Framework 1.1 compatibility
Does anyone know when the CRM will support .NET Framework 1.1?
I have VS.NET 2003 installed on my development machine. There doesn't seem
to be a straightforward way of building a solution in 1.0 from the IDE. I
guess I can use the command lines...
Microsoft CRM v1.2
http://www.workopia.com/Links.htm >> Other Microsoft CRM
Online Forum Resources
>Does anyone know when the CRM will support .NET Framework
>I have VS.NET 2003 installed on my development machine.
There doesn't seem
>to be a straig...How to know which mfc.dlls are needed to run my app
When I build a .exe using MFC, it won't run unless it can access the proper .dlls (mfc32d.dll, etc.). How can I find which .dlls I need to include when I want to install my software on another computer?
First of all, if your application is complaining about a missing mfc DLL
that has a "d" on the end of the name then you need to rebuild your
application using the Release build. The debug DLLs are not, nor should
they be, redistributable. Next, you can run the depends.exe utility to
identify what DLLs your application requires. It will show you ALL the DLLs
that are needed to...Exchange SVC Pack 1
DO NOT INSTALL. It crashed my server and caused the stores to unload and
crash frequently. Now Microsoft want to sell me a hotfix.
It was working b4 the svc pack upgrade so everyone beware!!
Er, no, that's not the case at all.
Exchange 2003 SP1 works perfectly fine for a large number of customers.
If you, as a Microsoft customer have had an issue with the SP that requires
a service pack, identified by Microsoft, then you will not be required to pay
If you have a KB that says you are to call MS for the fix then you may be
required to give details but you won't be char...MS CRM 1.2 or 3.0 for Help Desk Ticketing solution
Does anyone use this for a Ticketing program? I know we have the customer
service module but have never used it. Is there any documentation on how to
set it up as a help desk solution.
Yes , U can surely do this by making a case and the case number can be
considered a s Ticket number.
You will have to dive deep into the whole process to map it to CRM
> Does anyone use this for a Ticketing program? I know we have the customer
> service module but have never used it. Is there any documentation on how to
> set it up as a help desk ...comparing 2 similar columns on seperate work sheets in 1 workbook
How can I compare a column from worksheet 1 to a column in worksheet 2 of the
same work book?
BTW, the cell my have a number or text in it but not formulas
> How can I compare a column from worksheet 1 to a column in worksheet 2 of the
> same work book?
What are you looking for?
If you want to find out if each cell in Column A of sheet1 appears in column A
of sheet2, you could use a helper column of formulas:
and drag down
And you could use the same kind of formula that will tell you if values in
sheet2 appear in sheet1.
...Great Plains 8.0 Evaluation CD
I have downloaded the CD using my MSDN subscription to evaluavate the
product. But I am not able to read any documentation (neither PDF nor .CHM)
files. Its giving me errors. I tried using both Acrobat 6.0 and 5.0 .
Acrobat says files may be corrupted and when I tried opening .CHM files its
says cannot open the file mk:@MSITstore: <file path>
Any idea ? Please advise.
....NET Framework 1.1
I have Vista Home Basic. In the Control Panel\Programs and Features I find:
Microsoft .NET Framework 1.1
Microsoft .NET Framework 3.5 SPI Microsoft Corporation
Under Publisher there is nothing in the fist. Is it OK? Should I
redownload it? Also, do I need both of them?
Also, in Control Panel\Windows Update\View Update History, I see that
Microsoft .NET Framework 1.1 Service Pack 1
has failed, and was not tried again.
Should I download it manually?
It ain't THAT, babe! - A radical reinterpretation
https://files.nyu.edu/emf202/public/bd/itaintm...pivot table, How to add 1 column
I just need to add one column only but pivot table create another one?
I thinkc because I have a column with 2 parameters. I can turn on / off with
the field drop down menu
How can I get around with this problem?
...Queryinterface then Release fails
Not directly MFC but I couldn't find an appropriate group.
I am using the imaging api. and am not too familiar with COM.
As I understood it, you must release every resource obtained through
Would someone indicate why the pBasicBitmapOps->Release(); in the code
snippet below returns S_FALSE?
(the other Releases() return S_OK).
HBITMAP withImaging2 (HDC hdc, IImage *pImage)
IImagingFactory* pImageFactory = 0;
IBitmapImage* pBitmapImage = 0;
IBasicBitmapOps *pBasicBitmapOps = 0;
HBITMAP hBitmap = 0;
if...delete dupl from 1 table that match table 2
I have 2 tables joined by an acct # but diff data in the 2 other columns. I
want to delete the row of information from table A that have a matching acct
# in table b.
ie: appl acct # amount (table a) appl acct # amount
b 1234 $1.00 b 1234
c 111 $1.00 c 12345
c 1001 $2.00 c 1001
want to delete rows from table a. for accts #1234 & #1001
DELETE [Table A].[Acct #]
...Business Portal for Great Plains
Is this the right group for asking questions regarding the Microsoft
Business Portal for Great Plains? If not can anyone recommend a good
Charles Allen, MVP
> Is this the right group for asking questions regarding the Microsoft
> Business Portal for Great Plains? If not can anyone recommend a good
Here's a link the thread with my question...
http://groups.google.com/group/microsoft.public.greatplains/browse_thread/thread/8087e359b64746ef/5a28ef19...Converting incoming email to plain text
Is there any way I can configure Xch 5.5 to convert all received SMTP email
to plain text ? I can't find any option.
...Changing barcode type in RMS 1.3
Is there a way to change bar code type for all items all at once?
After importing to RMS 1.3 from QS200 all items show bar code type "none"
What is the best/standard type of bard codes to use.
Hi Robert, You can run the SQL Query to update it what you like: Use SO
Administrator Query option:
Update Item Set Barcodeformat=2
The above no 2 means the 2nd barcode from the list of barcode. so if you
want "codebar" you can put 4.
Please rate this.
> Is there a way to change bar code type for all items all at once?
> After imp...Plain text e-mail is double-spaced!
I'm using Outlook 2007
All my plain text e-mails sent, or received are formatted with double
This is line one
This is line two
This is line three
This is line one
This is line two
This is line three
How can I change this so I have single spacing???
On Mar 19, 5:08 pm, "Peter" <i...@peterssoftware.com> wrote:
> I'm usingOutlook2007
> All myplaintexte-mails sent, or received are formatted with double
> spaces. So
> This is line one
> This is line two
> This is line three
>...Convert "1" to "One" in Excel 2003?
How do I convert "1" to "One" in Excel 2003?
Use Laurent Longre's Morefunc.xll from
HTH. Best wishes Harald
"C2K" <C2K@discussions.microsoft.com> skrev i melding
> How do I convert "1" to "One" in Excel 2003?
C2K, have a look here
Always backup your data before trying something new
Please post any response to the newsgroups so others can benefit from it
Feedback on answers is always...