Retail Price randomly changes

Hi Guys

I'm using 1.3 and occassionaly when I go into the properties of an item, the 
price changes to the price of another item (sometimes previously pulled up) 
I've tried 
checking the database and reindexing it, same thing. Any ideas?

Thanks in advance for your advice
0
Mitch (67)
10/26/2006 5:43:01 PM
pos 14173 articles. 0 followers. Follow

2 Replies
664 Views

Similar Articles

[PageSpeed] 42

Search for a post titled "problems after update"

There is a fix for it, but you have to enter in a support request, they will 
then give you the fix for free

"Mitch" wrote:

> Hi Guys
> 
> I'm using 1.3 and occassionaly when I go into the properties of an item, the 
> price changes to the price of another item (sometimes previously pulled up) 
> I've tried 
> checking the database and reindexing it, same thing. Any ideas?
> 
> Thanks in advance for your advice
0
10/26/2006 5:52:01 PM
Thanks Jordon - 

I was worried my database was broke - your help is GREATLY appreciated...
 Mitch

"Jordon Norwood" wrote:

> Search for a post titled "problems after update"
> 
> There is a fix for it, but you have to enter in a support request, they will 
> then give you the fix for free
> 
> "Mitch" wrote:
> 
> > Hi Guys
> > 
> > I'm using 1.3 and occassionaly when I go into the properties of an item, the 
> > price changes to the price of another item (sometimes previously pulled up) 
> > I've tried 
> > checking the database and reindexing it, same thing. Any ideas?
> > 
> > Thanks in advance for your advice
0
Mitch (67)
10/27/2006 5:35:02 PM
Reply:

Similar Artilces:

Record shift or change on form
When the application is left alone with a record displayed on a form, it sometimes jumps to another record without any keyboard or mouse input. Is this a bug? Any plausible explanations? Karl On Tue, 18 Mar 2008 16:27:02 -0700, Karl H <KarlH@discussions.microsoft.com> wrote: Some VBA code is making this happen, perhaps from a Timer event. -Tom. >When the application is left alone with a record displayed on a form, it >sometimes jumps to another record without any keyboard or mouse input. >Is this a bug? Any plausible explanations? >Karl Hi Tom, I have 200 users, and ...

Writing data from one sheet to another template sheet and change the filename
Hi Folks! I have a range of data from A2:A140 in one excel file and an other file which basically is like a template. The data from the cells A2:A140 ( one at a time) should write into Cell C4 of the template file and then save the file as (DATA.A2) PFSR Overview and (DATA.A3) PFSR Overview and so on...... Here DATA.A2 being the alphanumeric data in cell A2, A3 and so on. Can anybody please help me on this. I have like 765 individual files to create in the same way and I dont want to do it manually!! Thanks so much for your help. - Britney Cox Untested, but it did compile ok: Option ...

Changing Margins Within a Document
Version: 2008 Operating System: Mac OS X 10.6 (Snow Leopard) Processor: Intel Is it possible to change margins - top and bottom or sides - within a document. In other words, I want certain pages to have certain margins and other pages different margins. <br><br>Thank you. <br> Mary Solomon Yes, you can do so, but it requires the use of Section Breaks. You can then specify the preferred margins independently for each section. Depending on exactly what you're trying to accomplish, however, it might be better to consider using Left & Right Indents instead. ...

Change Text
In Cell A1 I have two types of text: 5/3 or 15/2 In Cell A2 I want a formula that changes the A1 text to 053 or 152. Cheers GK Try in A2: =TEXT(SUBSTITUTE(A1,"/",""),"000") -- Rgds Max xl 97 --- GMT+8, 1� 22' N 103� 45' E xdemechanik <at>yahoo<dot>com ---- "gregork" <gregork@paradise.net.nz> wrote in message news:421ee495@clear.net.nz... > In Cell A1 I have two types of text: 5/3 or 15/2 > In Cell A2 I want a formula that changes the A1 text to 053 or 152. > > Cheers > GK > > > Thanks for your ...

How to change the name of a project?
How can I change a project's name? Is it enough to rename the .dsw, .dsp, .ncb, .opt, and .plg? Or is there something subtle that will make this not work? What about just the .dsw and .dsp and deleting the other files and recompiling? open u r dsw in any text editor and replace the name of the dsw with u r desired name. then rename the file as well. be careful that the find replace dowsnt change the name of the app class cpp n h and other files which too if created via AppWizard has the same name as the project. SY "Yasoo" <Yasoo@discussions.microsoft.com> wrote in m...

change OWA URL from http://servername/exchange to http://servername/webmail/exchange
Hi all, Because we want to use OWA (Exch 2003) on our extranet (e.g. extranet.domain.com) which next to OWA has to serve other websites (apache, tomcat, other iis) we want to add a directory to the exchange url, so at the firewall (which hosts the proxy server it's clear which server to choose even a second owa (the old 5.5)). We can do do this for the exchange virtual directory but have to setup this also for the other virtual dirs:exchweb, contents, public etc. Is their a simple (or hard) way to slip in a directory in the url ? Regards, Laurens On 31 Mar 2006 00:58:06 -0800, "L...

Change multiple accounts to a new owner
Rather than having ot create a SQL function to do this can I change more than one accounts ownership to a different user? Q: I want to highlight 25 accounts and change the ownership to a different user. When I highlight more than one account lets say 4 accounts I goto more actions then edit. In the details tab (where you normally change the owner) the field is grayed out so I can not make a modification. Is there a simple way to give new ownership? Instead of going to actions, click on the button that is the fifth from the right - looks like a person with an arrow. This will bring up ...

Change "Find Names" dialog in OWA
Hi there, Hope I have the right group.... I have a requirement to remove the "alias" details from the OWA "Find Names" dialog box .... My client doesn't want their users to see alias as it may confuse them. I have successfully removed it from the details template for normal Outlook clients, but can I remove it from the OWA dialog? Many thanks "Stuart Parker" <mrgimper@nospam-hotmail.com> wrote in message news:eCt9BMsjGHA.4212@TK2MSFTNGP03.phx.gbl... > Hi there, > > Hope I have the right group.... > > I have a requirement to rem...

I'm I the only one pissed off at BofA for changing the format they use for reporting transactions?
Instead of putting the location where the transaction took place, the transaction entry now starts with: BANK CARD PURCHASE 0980980923482348923 WTF is that? Now I'm forced to manually change the payee so that the transactions auto-classify. Am I the only one noticing this? If not, please send an email to them about it through their site. Maybe if enough people complain they'll fix this problem. Its a long shot, but worth a try. njohn said the following: > Instead of putting the location where the transaction took place, the > transaction entry now starts with: BANK CARD PURCHA...

J.P. Morgan Chase bank changes
I just got a message from JP Morgan Chase Bank that we need to make changes to our setup in order to continue getting their downloads for Money. The instruction are 12 pages long (in PDF format) and seem rather complicated and involve canceling our existing on-line accounts with Chase. There is no explanation at all about why they are making these changes. Does anyone know (or can figure out) what is going on? Links to the instructions can be found at http://www.chase.com/cm/cs?pagename=Chase/Href&urlname=shared/crb/page/QuickenMoneyJan.jsp ..Thanks -- Peace, BobJ In microso...

Changing split pane CView class at runtime
Hello, I am trying to develop a MDI application with a spilt window, where I have 2 splitter pane at the same time: CTreeView and another View which can be changed at runtime e.g. a CView or CEditView depending at which node has been selected in the treeView. Right now I have the application running with a split window containing CTreeView and CView, but I am blank on how to change the splitter pane CView clase to the CEditView at runtime. The next question is: Is it possible to get access to the CChildFrame class from the CView class, because it is properly CChildFrame which shall do ...

changes on a list
I have a CListView (not control) view situated in a docking pane (CodeJock Toolkit Pro). I want to detect when the user selects an item in the list or changes selection on the list, but can't find the right event. I'm sure there is a OnSelChanged message, but I need to know what ON_COMMAND to use and what parameters should go on my OnSelChanged method. I have looked in the MSDN, but I need to know what event to look up to find this information and if I knew what event to look up, then I wouldn't need to look anything up!! Any advice or MSDN links appreciated. No ON_COMMA...

outlook 2007
in Outlook 2007 how do I change the emails default margins? for emails were using Memo Style The default margins are 1.30cm However when users print and holepunch, theres not enough room and it hole punches over the text. I know how to change manually, through the menu File, select PageSetup, select Memo Style. The Page Setup:Memo Style dialog displays. select tab Paper and enter Margins Top, Bottom, Left, Right 2.54cm, click OK. Its been mentioned the settings are stored in the file C:\Documents and Settings\<UserName>\Application Data\Microsoft\Outlook\OutlPrnt ...

time of day changed after activesync
Every time I place an event in the calendar on Outlook, it is listed one hour ahead on my PocketPC after synchronizing.. But if I enter the event directly on the PocketPC and then sync, it shows the correct time on Outlook... any solutions? thanks, kevin Check your time settings on your computer clock, Outlook and the PPC - ensure that they are all using the same time zone and daylight savings time settings. --� Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion intact. Due to the (insert latest virus name here) virus, all mail sent to my personal accou...

CDialog::Create() changes foreground window
Hi In my dialog based application I must create a modeless, invisible window: class CDummyDlg : public CDialog { // (...) }; BOOL CApp::InitInstance() { // (...) InitCommonControls(); this->TBase::InitInstance(); CDummyDlg * m_dummy_dlg; this->m_dummy_dlg = new CDummyDlg(); this->m_dummy_dlg->Create(IDD); this->m_pMainWnd = this->m_dummy_dlg; // (...) } Unfortunately the CDialog::Create() method somehow changes the foreground window from, for example: Total Commander or MS Visual Studio, or any other program, starting...

importing share and unit trust prices
Is there a way of importing share or unit trust prices into Money? I would like to update the historical value of some investments which are not available online. My only alternative at this stage is to manually enter it for each investment. I was thinking if I can create a file with the month end dates and prices, and download it into money. Thanks, John No to the first post. No to the second post. No to the third post. Care to try for four and see if your luck changes? "John D." <JohnD@discussions.microsoft.com> wrote in message news:223CD00E-0E7B-4A69-A0DF-AC72...

changing default settings
How can I change the default settings under options. i.e. I would like the View page breaks to be always checked. Although displaying page breaks is a worksheet level property, it is a setting that is not saved with the workbook. And when Excel opens a workbook pagebreak display is always off. So, as far as I know, the only way you could have it be set on when a workbook opens is through a macro. If you haven't delved into macros before this can be tough sledding, bit for what it's worth: Running a macro in a specific workbook automatically is discussed here: http://support.micr...

Combining multiple documents in Word 2007 (track changes) 03-04-10
I have used tracked changes before and can compare two documents (original and 2nd document). Can anyone tell me how to compare multiple documents? I can only get the original and one document but not multiple documents. Thanks! Do you mean when the docs open 3 files side-by-side to compare? I didn't see where you can do that, try creating a folder with the author name, since it searches by author. "Beach Lover" wrote: > I have used tracked changes before and can compare two documents (original > and 2nd document). Can anyone tell me how to compare ...

Change radians
How do I change setting for trigonomic functions, radians - degrees. I am making a table with many different trig functions, the answers are currently in radians, I need degrees. Using Excel 2003. Thanks. All of Excel's trig functions use radians, not degrees, and there is no way to change that. You can use the DEGREES function to convert radians to degrees. E.g., =DEGREES(ASIN(1)) -- Cordially, Chip Pearson Microsoft MVP - Excel Pearson Software Consulting, LLC www.cpearson.com "David" <David@discussions.microsoft.com> wrote in message news:70770C2A-3F96-490A-BE...

Change cross-reference reports to Posting Journals
Change the cross reference report to read Reprint Posting Journals as it is in all of the other modules. This will make it less confusing for users and easier to find. ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane. http://www.microsoft.com/Businesssolutions/Community...

Can't change height of group header
There is a report I run from a database that will not allow me to change the group header height setting. It is stuck at 22", and whether I try to reduce the height by typing the desired value into the properties window or by dragging the next section up, it goes back to 22". This puts about 3 blank pages in before the details section. I can change other header/footer heights in the report with no problem. This problem only arose after converting the file to Access 2007 format. Thanks in advance, Scott If you cannot reduce the height in design view, then there ...

Windows File Explorers could allow fonts face and color changes.
Sorry, this is not a Word question, but I could not find "Windows File Explorer". When I open a file explorer and see the list of folders and files, I often wish I could change the file and folder names fonts to be bold or to have different colors. This would allow a visual sorting without using a folder, and would make it easier for example to say "open the file with the green name". ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agr...

change single page orientation within a publication
want to change selected page orientation between portrait and landscpae within a multipage publisher document. How do you do this? Can not selectively do this or orientation for all pages in the document changes ...

Named sheet to change Cells names
Situation is really tricky for me, (D;E) 4 in one peace, and i need it to be named as my sheet but not fully, Sheet name is T 060_esik (and "esik" part needs transport into cell D;E4) is it possible? I guess i explained correctly! Thnx Let's assume that your sheetname hastwo parts separated by an underscore. The following UDF will return the part following that underscore: Function sname(r As Range) Application.Volatile sname = Split(r.Parent.Name, "_")(1) End Function So if the sheetname is qwerty_asdf =sname(A1) will display: asdf -- Gary''s Student ...

I can't change border for cell
I'd like to change the border around a selected row to a heavier one. I follow all the instructions in "Help" but it does not change the border. Hello, if you are trying to change border via icon on formatting toolbar, you shoud choose "Draw borders" and select the right line style. But you can also try to draw border by selecting Format - Cells - Border where you can also select different border styles. But selecting the style is not enough. You must first select border style (and color if you don't want automatic/black) and then select where you want to hav...