workstations lose connection to SBS 2003 server
At the end of the day, my workstations are connected to my SBS 2003 server
and the shared server drives are visible. But the next morning, the
workstations have been disconnected. (When viewed in Windows Explorer on the
workstation, they show as Dissconnected.) When I reboot the workstation, the
connection is restored.
All computers are left running overnight. What is causing the workstations
to disconnect overnight?
What are you using for backups?
if you click connect are they reconnecting?
do the PC's go into sleep mode?
Russell Grover - SBITS.Biz [SBS-M...Can't change authentication methods on HTTP Virtual Server
Trying to change Authentication Methods for Exchange properties in my HTTP
Virtual Server and it is grayed out. I read a document explaining not to use
IIS console to do this. Well, I can't do it from here. I am not sure if this
is some kind of a security setting. I am logged in as Administrator.
Help is greatly appreciated
Are you trying to do this from Exchange System Manager, Server,
Protocols, HTTP, Exchange Virtual Server? If so, you are correct, you
should not make changes through here. You want to change it throuhg
IIS. Go to Start, Program Files, Administrative Tools, Interne...RMS for 20 lanes?
We are an RMS solution provider and we have a potential new customer that is
setting up a new store with 20 lanes. Is RMS capable for that many lanes?
Any experiences or suggestions greatly appreciated.
Sure. And, if the "lanes" are spread over several stores you might consider
HQ (Headquarters) to meet their "corporate office" needs.
"Hamish Browne" wrote:
> Hi all,
> We are an RMS solution provider and we have a potential new customer that is
> setting up a new store with 20 lanes. Is RMS capable for that many lanes?...RMS
HI: I AM TRYING TO SYNC RMS WITH MY PEACTREE ACCOUNTING PROGRAM, BUT
APPARENTLY MY FILE IS OUT OF BALANCE AND PEACHTREE IS NOT IMPORTING IT.
DOES SOMEONE KNOWS HOW TO GENERATE A GENERAL LEDGER TRIAL BALANCE FROM THE
RMS? THIS WAY I WILL ABLE TO FIND OUT WHERE THE MISTAKE IS....
I THANK YOU IN ADVANCE!
...Question on Storage Limit for Standard Server
I know Exchange Standard is limited to 16 GIG's. (for now, until SP2) But is
that Actual DB size, or size of the 4 files. Different people tell me
different things. And I am trying to get the actual word on that.
I just deleted 2 users from our system. In the exchange admin program
together they showed about 4 Gig's of emails. After I deleted them &
Purged - the db size did not go down. When we did an Offline Defrag, it
freed up 1.0 GIG.
Is there something I am missing? The 4 files are around 13.0GIG. I don't
want to have the server shutdown (again)
Just trying t...SBS2003 server with MSCRM 3 Small Biz Edition on Network
As you may know, Microsoft has changed the way that MSCRM is licensed
in version 3.0, there is separate licensing for MSCRM 3.0 depending on
whether the underlying server operating system being installed on is
SBS 2003 or full blown Windows 2003. The price of licenses of MSCRM
3.0 Small Biz Edition is approx half that of MSCRM 3.0 Prof Edition,
and Microsoft did it this way so that MSCRM 3.0 Small Biz edition can
compete effectively with mid market CRM packages such as Goldmine, etc.
However, problems arises when small business customers ARE NOT running
SBS 2003. I have got ...Help - RMS 2.0 Installation Problem
I just installed RMS 2.0, and the"Add Item" button does not work in the
Purchase Order. I click on it, and nothing happens. I have downloaded RMS
2.0 Service Pack #2, but have not installed it yet.
That problem is addressed in one of the older hot fixes prior to SP2.
"gregfrgusa" <firstname.lastname@example.org> wrote in message
> I just installed RMS 2.0, and the"Add Item" button does not work in the
> Purchase Order. I click on it, an...Cannot make any changs on server
Every time I try and make a change, or publish something on my test server,
I receive this error message
"An error has occurred. For more information contact your system
I have set the web config file to give more details on errors, but it does
not give anything more than this for the error.
I cannot find any problems in the event logs of the servers. I have even
restarted the, to no avail. Does anyone know what could suddently cause this
In the web.config, did you change <add key="DevErrors" value="Off" />
from &...exchange server 2003 backup options
My company and I are trying to come up with a solution
for having a backup system for our primary exchange
server should it go down. We have a second windows 2003
standard server online. I am afraid of major
complications if we just load exchange 2003 server on
this other server. I am sure there must be another way to
Would appreciate any help on this.
"Gwen" <email@example.com> wrote in news:1913501c44c92
> My company and I are trying to come up with a solution
> for having a bac...Rule to filter mails from same exchange server #2
In the outlook 2000, how we can create a rule to move messages from
same exchange server to another folder? I created a rule to move the
messages if the sender's address contains our domain name. But that
doesn't work...may be bz, if the msg is from same exchange server, it
won't include the domain name part in the sender's id.
firstname.lastname@example.org <email@example.com> wrote:
> In the outlook 2000, how we can create a rule to move messages from
> same exchange server to another folder? I created a rule to move the
> messages if ...Connection Filtering Log?
I have my Exchange 2003 server set to perform a connection filtering to
limit some of the spammer connections....works fine.
Is there a way to have an event log of the refused connections so that I can
perform troubleshooting, if needed?
Enable SMTP Protocol logging on the properties of the Default SMTP Virtual
Server. It won't log it to your event logs, but it should log to the smtp
"Rob T" <RTorcellini@DONTwalchemSPAM.com> wrote in message
>I ha...where can i store my personal templates and have access from excel
I have office 2010 beta installed and am having trouble finding a location to
store my personal templates to and have access from all my office 2010
...Need no-install (i.e. no admin rights) database to run from HTA on win7 x64
I need to be able to create a small HTA capable of running on Win 7x64
as well as WinPE3. I would have preferred to use the MS text driver
and store the data in an simple CSV, but that is no longer included
within the MDAC, and is not available in Windows 7 x64.
There is no guarantee of administrative permissions on target
I'm looking at using SQLitePlus (com wrapper for SQLite) and wondered
if anyone has used it, or has an alternative that may be able to be
I don't know if this is the right thing for your
needs, but you can actually use Windows
Insta...Exchange Server Recovery #2
We are planning on building a 2 server exchange site on e2k3 enterprise. We
would like to use each server as the recovery server in case the other
becomes unavailable. We are lookng at using VSS to replicate the stores
between each server. If one of the servers becomes unavailable what is the
easiest method to get the information store going on the other considering
that AD will be intact and the other server is in the same admin group.
I have read some material on RSG's and dial tone databases but it does not
seem to directly address our objective.
Look into Active/Ac...Unable to connect from clients
We have server running CRM 4.0 and on the server CRM works just fine. When
we try to connect to CRM from the browser we get 401.2 401.1 200 0 0 errors
in IIS log
We try to connect with ip address, hostname and servername:5555 which all
works on the server but they time out on the clients.
What could be wrong ??
"CRM consultant" <firstname.lastname@example.org> wrote in message
> We have server running CRM 4.0 and on the server CRM works just fine. When
> we try to connect to CRM from the browser we get 4...Recovery server #3
When restoring to a recovery server in another forest, does the
recovery server name have to be the same as the backed up server?
Sorry - should have specified Exchange 2000 SP3
On Tue, 23 Aug 2005 13:08:47 +0700, Peter Kaufman
>When restoring to a recovery server in another forest, does the
>recovery server name have to be the same as the backed up server?
MVP - Exchange
"Protecting the world from PSTs and brick backups!"
"Peter Kaufman&quo...IIS 6 cannot start on Exchange 2003 server
Trying to access the public folders through ESM
I get the error The connection was refused. Ensure that your HTTP virtual servers are all started and check that the
WWW service is running.
The IIS default site cannot start.
Why can't it start? Is there a port conflict?
Bell Consulting Services, Inc.
No emails please.
"David Lewis" <*@*.*> wrote in message
> Trying to access the public folders through ESM
> I get the error The connection was refused. Ensure that your HTTP virtual
> servers ...outgoing failure and non-delivery messages from SMTP server..
I have one machine that I use sparingly as a mass email server.
Of the thousand or so emails that go out from that machine once a month, a
couple of hundred of them are bound to be wrong or changed email addresses.
The SMTP server sends out "Delivery Status Notification (Delay)" and
"Delivery Status Notification (Failure)" messages, soon after the intial
sending of the mass emails.
However, when I turn off the SMTP server, or keep the machine off for a few
days, then I don't get any of those failure/non-delivery messages. But as
soon as I turn on the mach...Information store terminated...
Upon reboot of our Exchange 5.5 server, we are getting the
error: Exchange Store Terminated with server specific
Any advise or thoughts greatly welcome.
any further information in the event log? are you low on disk space?
"Gary Hornbeck" <email@example.com> wrote in message
> Upon reboot of our Exchange 5.5 server, we are getting the
> error: Exchange Store Terminated with server specific
> error 4294966781.
> Any advise or thoughts greatly welcome.
...Synchronize Office Information with Pocket PC (Windows Mobile 2003
I've downloaded Office 2007 (Beta2) and Activesync 4.1. Why can't I do the
1. Sync or select Contacts, Calendar, Notes in Activesync 4.1
2. Access the Internet from my PPC when partnership was successful.
3. Import/Export mail accounts from Office Outlook(message:"not implemented".
...Help finding Exchange Server or Administrator
I have been unable to use Outlook because I I can't access an Exchange Server
or get an HTTP address from an. THese are the messages I continue to get,
that doesn't allow me to move forward with use.
Do you have an exchange server account? If so, contact your email
administrator. If you don't have an exchange account (or if you don't know
if you do, you probably don't) then you may need to create a new profile.
What version of outlook do you have?
If you have an exchange account and use OWA, see
http://www.outlook-tips.net/archives/20030904.htm if you want...How to copy files from 1 server to another
I am using a utility (Macro Scheduler) to copy a folder (with sub-folders)
from 1 server to another overnight as a backup.
(WS2008 to WS2003 - utility runs on WS2003 machine)
However if a file is locked the whole copy is terminated.
Are there utilities on the servers and/or comercial products that will do
this even when a file is locked for use.
"ThomasAJ" <ThomasAJ@discussions.microsoft.com> said this in news item
> I am using a utility (Macro Scheduler) to copy a folder (wit...ASP.Net 2005 Editable Drop down server control
Could any one share me open source code to customize Asp.net 2005 drop down
control as an editable drop down control. This is an urgent requirement.
Thanks in advance
Check out the code at this link:
"JPrasad." <JPrasad@discussions.microsoft.com> wrote in message
> Could any one share me open source code to customize Asp.net 2005 drop
> control as an editable drop down control. This is an urgent requirement.
> Thanks in a...Edge server in front of 2k3 server?
Any issue with putting an Edge box in front of a 2k3 farm? Any gotcha's
to watch out for?
If possible, is there a way to have a single edge server route mail to
different 2k3 orgs?
Why would you do that?
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
"Dan" <Dan@discussions.microsoft.com> wrote in message
> Hey all,
> Any issue with putting an Edge box in front of a 2k3 farm? Any gotcha's
> to watch...32bit ODBC connect to 64bits server?
I'm trying to create a User DSN (from my 32-bit Server and PC) to SQL
Server 2008 R2 64-bit. I'm using the SQL Server Native Client 10
driver. When select SQL authentication, type 'sa' as a user and
password click Next;
SQL Server Error: 0
[Microsoft][SQL Server native Client 10.0] Unable to complete login
presecc due to delay in opening server connection.
On Jul 30, 2:51=A0am, MLITSupport <mlit.suppor...@gmail.com> wrote:
> I'm trying to create a User DSN (from my 32-bit Server and PC) to SQL