Historic currency exchange rates for Schedule C reporting
I'm trying to get a Schedule C report out of Money but cannot correct the
exchange rate it is using.
I have an account with entries in GBP for 2008, but that are converted to
USD for my Schedule C report. However, pretty sure the exchange used is
supposed to be either some annual average as mandated by the government or
the daily rate at the time. Money is just using today's rate, which is
obviously causing inaccurate and varying results each time I run the report.
Is there any way to tell money to use the rate on the date of the
transaction, or give it the rate to use for a r...FRx 6.5 Reports with FRx 6.7 Report Server
Can FRx 6.5 reports work with FRx 6.7 Report Server without being upgraded
to FRx 6.7? Any Help would be appreciated.
Thanks for the question about FRx 6.5 and 6.7. I would recommend having
your entire FRx environment operating on the same version. When using
different versions of FRx in one environment it can create problems. Let us
know if you have any questions.
Microsoft Online Partner Support
When responding to posts, please "Reply to Group" via you...Please help very urgent to give ageing report
Please give me an sql to generate the report from
I have three column in my table
I want to show
1. if the month is current month it should be shown as ' Current'
2. If the previous month it should be shown as '30'
3 if before previous month it should be '60'
4 if before '60' it should be '90'
5. otherwise it should be '120'
Have a look at the Partition() function. A good helpfile for it is at:
--...Combine multiple records in one field in Access report
I'm having trouble designing a report. I have a report that sorts the data
according to "Change Order Number", however, a change order can have multiple
"Trend Numbers", "RFI Numbers", and other records associated with it and I
want all of the "Trend Numbers" (and these other records) to fit on one line.
For example, "Change Order Number 1" has 2 "Trend Numbers" associated with
it, and the report currently shows this information in two rows with all of
the other information for Change Order 1 repeating. I've done hide...Show harvest report error when installing app on Terminal Server.
I have an application that I want to install on a terminal server to
publish, but I am having difficulties. The scenario follows
The application is dependant on an Oracle install. What I am doing is
installing the Oracle client first then I load the program. Then to
print Crystal reports, I just map a network drive to the location where
these premade Crystal reports reside. This works just fine and dandy
on all my workstations. So, I tried to load this on a Citrix Server to
publish this out, and all of the sudden when I go to run a report, I get an
error that says ...Client Report
How do I get the report not to display what is in column 1 (ID) and just show
column 2 (Parent Name)
>How do I get the report not to display what is in column 1 (ID) and just show
>column 2 (Parent Name)
Either delete the id text box or make it invisible.
If you used a wixard to create the report, then open the
report in design view to change it.
MVP [MS Access]
...Reason Code Reports
How can I run a report regarding reason codes? I have made it so that you
need to give a reason before making a return. If someone makes a return, I
want to know why...how can I run this sort of report?
Just run a sales detail report and unhide them. You can filter by them
"Vince" <Vince@discussions.microsoft.com> wrote in message
> How can I run a report regarding reason codes? I have made it so that you
> need to give a reason before making a return. If someone ma...Account Payable Detail report
I will like to know if someone can help me, I need to know the path to run
an Account Payable Detail report. This file should contain the lowest level
of detail. Each record should include the General Ledger account number to
which the transaction is being charged. I am using Dynamics GP 10 with SQL
Thank you in advanced.
The GL Distribution Detail in Purchaing Posting Journal can be access via
Reports>>Purchasing>>Posting Journals (GL GL Distribution Detail). When you
create/modify a report options, you can use the ...Crystal Report Viewer Error
When trying to run reports through the CRM I get the following error:
Information is needed before this report can be processed.
This shows up in the popup window where the results of the report would
normally show before you would press the print button.
This error is caused by
1)Installing Microsoft CRM on a computer that has an underscore in its name.
2)Security issues related to domain and Microsoft CRM setup.
Microsoft has explained the causes and how to resolve this error in the
http://www.microsoft.com/download...Report that display percentage below certain level
I got a spreadsheet contain inventory number from remote site. I need to run
a report to display when inventory below a certain percentage. I try to use
privot table to display the infomration. But it doesn't display everything
below 40%. Is there anyway you can enter an percentage and display all
remote site that below certain percentage (Eample: like 35%) on a report?
A pivot table groups like items, and makes a calculation on each group --
not what you need. You need a filter (Excel's way of saying "query" in
database parlance). If your table...Automatic email of reports
Can reports be generated and sent automatically to given
mail ids on a regular basis ?
via Crystal Reports, not an option with current out of box version v1.2.
You can try externally controlling it via SDK approach.
San Francisco, CA
> Hi all
> Can reports be generated and sent automatically to given
> mail ids on a regular basis ?
> Pls advice
...CRM report Error - Account Overview
Is it possible if anyone could help me with the following problem.The
Account Overview Report does not appear for one of the clients. When the
report is opened the following error message appears: Error: Subreport could
not be shown.
Thank you in advance
...crystal reports 9.2.2 02-03-04
I have been working on customizing reports. After I
upgraded crm to 1.2 I can no longer access my reports. I
tried to install the crystal repors enhancement for 1.2.
I am getting an error that I am using crystal reports
9.2.0 and I need to upgrade to 9.2.2? I had crystal
reports 9.0 professional edition installed on my computer
also. I removed that and then tried to install the crm
1.2 crystal reports enhancement and I am getting the same
errors. Please help.
It seems that CRM requires a very specific version of crystal reports ie
Microsoft have told me that you ...Customize link not working in Reports
Money 2002: Version 10.0
When I open a report (any report) and then choose the Customize... link on
the left side, I do not get the Customize Dialog box that I used to see.
Money is basically unusable until I hit the ESC (Escape) key.
If you are using Money 2005, go into Tools/Reports and see whether you are
using Essential or Advanced Reports. My guess is that you need to switch from
Essential to Advanced. This is new in Money 2005.
"LongTime User" wrote:
> Money 2002: Version 10.0
> When I open a report (any report) and then choose the Customize....Report Server Error 09-19-07
I have completed my CRM install but each time I attempt to access the Report
Manager I get the error message: The Scriptbibliotek
'/aspnet_client/system_web/1_1_4322/WebUIValidation.js' cannot be found.
Manually move the data or use the command 'aspnet_regiis -c' in order to
install new. Sorry if the error is not completely correct but I´m
translating from German.
I have run the command 'aspnet_regiis -c' and received the message that the
version started and then finished but every time I go back to Report Manager
the same error pops up. Need a little...No Reports in CRM 3.0 Install
I have been working on installing CRM 3.0 (fresh install) on a Small
Business Server and I have been having trouble getting the reporting services
to work correctly. I have been able to get the reports section to pull up
now but no reports are listed in the grid. All the other functions appear to
be working and I can even start to add reports but it puzzles me. Doesn't
Microsoft provide sample reports to begin with? Has anyone else had this
issue and if so, how do I get the reports to show up? Surely they gave us
standard reports with the program?!?!?!
on ...Exporting Reports
I am trying to export or publish a report into word. The report has about 80
stores within it. Each store starts at a new page. Some stores have many
pages to them. I want to export the report out to word, but I want each store
to have it's onw location. For example: Laurel will go to a new document and
Annapolis will go to it's own word document. Right now I publish the report
and all of the stores are in one document and I have to copy and paste them
into there own document. Is this possible?
It is possible to choose the data that goes into a particular report, and to...I got 'forbidden' popup message OWA.
I got 'forbidden' popup message when sending, replying
emails using OWA. Please help! Also any configuration
change gives me a also "Denied" Help please!
Are you using a pop-up blocker on your workstation?
On Sun, 20 Jun 2004 14:43:50 -0700, "TJC"
>I got 'forbidden' popup message when sending, replying
>emails using OWA. Please help! Also any configuration
>change gives me a also "Denied" Help please!
No pop-up blocker and this is for all my 50 account users.
Very strange becau...Memory for rendering a report page
Does Access limit the amount of memory needed to render a report page?
If so, is it possible to increase the default?
Type a question (i.e., Access specifications) on help filed of access window.
If I have helped and/or answered your question, please let me know by
replying or clicking question answered (below positioned ‘Yes’ button).
> Does Access limit the amount of memory needed to render a report page?
> If so, is it possible to increase the default?
>Does Access limit the amount of memory needed to render a r...selecting the 2nd column of a combo box in a report?
I have a combo box that uses data from a table with the fields (setupid, physician setup, md_PIN). the bound column = 1. The physicians sign on using their name (signing_md) and PIN (signing_md_pin). thanks to advice from this website I have...If signing_md_pin.value = dlookup("md_pin". "[setup table]","[setupid] =" [signing_md] then ... in the event procedure. When I try to get the physician name on the report (signing_md) it returns the physician number (setupid) instead of the name. How do I get the 2nd column of the combo box to the report?Thank you....Help me send an email with just one record from a report
PLZ Somebody help me with email just one record...
Here is what I currently have
DoCmd.SendObject acSendReport, "RptArSheet", "Snap", "", "", "", "", "",
It send the whole report when I just want the current record of the report....
but i dont know how to do that plz help
Message posted via AccessMonster.com
You need to filter the report in some way so that the report only contains
one record. You can either use ...report date range
I have a report that will display data from an inventory transaction history
form. There I would enter in the date and several other criteria. After doing
so I filter the form to my selection and then print my report. I wanted the
date range that is on the form to print on the report. I hvae done this in
several other reports and never had a problem until now. I'm getting #NAME.
The form is still open upon viewing the report. On the report I have a text
box with the logic of:
="Report Date Between: " & [Forms]![frmInvTransactionHistory]![BegtDate] & "
and &...VBA to default printer in Crystal Report
is it possible to set default the printer for crystal report to be the same
as the printer setup in GP (Files>Print Setup)?
eg: is GP is using Printer1, then when calling a crystal report using VBA,
the printer will be set to Printer1. If GP is using Printer2, then crystal
report will be defaulted to Printer2.
thks in advance.
Unfortunately that isn't going to work for a couple reason:
1. The biggest reason is there isn't any way to determine what the printer
is in Dynamics. Not even with Dexterity. It just wasn't something that was
exposed. So I can't think of ...Creating Reports 05-08-07
I have been investigating the different methods of creating a new report in
crm and have found a few different methods. What is the easier and time
efficient method for creating a new custom report?
On May 8, 3:26 pm, Nate <N...@discussions.microsoft.com> wrote:
> I have been investigating the different methods of creating a new report in
> crm and have found a few different methods. What is the easier and time
> efficient method for creating a new custom report?
Pre-filtering the reports per the SDK is probably going to be your
best bet. You can upload them into CRM and ...Access 2007 Report Question
We have an a main equipment table that shows multiple pieces if
equipment and current location.
Is there an easy way to create a summary report which shows the
current total for a specific item at a specific location?
If you set up a grouping report. It may be necessary to create a
grouping/totals query first on the table and use that query to create your
report. The report wizard should give you a way to summarize the information
with a count.
"Rex Mundi" <email@example.com> wrote in message