Crash on 'Send"
My wife's Intel Celeron running ME started having this problem
sporadically - now constantly.
Outlook 2000 receives OK - everything seems fine until you hit the 'Send'
button then Outlook crashes giving an error message that says 'Outlook has
caused an error in <unknown> and has to shut down. If the problem persists
you may have to restart your computer.'
Re-starting however has no effect.
I have re-installed Office. Used 'Detect & Repair' under the 'Help' tab, and
installed all patches/updates from the Office site. But this error
continues, now...Transferring over outlook data to new XP machine
How do I transfer over my old emails, address book to my
new XP machine? I have looked over the internet and found
nothing the tells me EXACTLY how to do this, any help
would be greatly appreciated.
If your using MS Outlook copy your .PST file across and import it into the new install.
>If your using MS Outlook copy your .PST file across and import it into the
No, don't import it. Simply use "File">"Open"
3290 Patterson Ave. SE, MS 1B3
Grand Rapids, MI 49512-1991
Brian.Tillman is the nam...Parsing data from one spreadsheet into another format
The data that we dump out of one machine comes in like below.
%AT_1300 Bottoms|Conductivity| (Water Out) InputRange VDC1to5
%AT_1300 Bottoms|Conductivity| (Water Out) Custom_Range_Low 0.0
%AT_1300 Bottoms|Conductivity| (Water Out) Custom_Range_Hi 0.0
%AT_1300 Bottoms|Conductivity| (Water Out) MinScale 0.0
%AT_1300 Bottoms|Conductivity| (Water Out) MaxScale 20.0
%AT_1300 Bottoms|Conductivity| (Water Out) EngUnits mhos
%AT_1300 Bottoms|Conductivity| (Water Out) StepResponseTime 1.0
%AT_1300 Bottoms|Conductivity| (Water Out) DigFiltTimeCnst 0.016
And I need to convert this data to this f...Outlook 2003 and "Check Names"
We are testing Outlook 2003 at our office now and there is
one very frustrating "feature" that is bugging all of us.
When we create a new e-mail message and type in the first
name of a person from the global address book and hit ctrl-
k to check the name...we get a response that Outlook
doesn't recognize the name and there are "no suggestions".
The only way Check Name will successfully resolve the name
is if we type it last name first (ie, Gates, Bill). This
was not the case in Office XP or Outlook 2000. You could
search by first name (or partial first name)...Outlook 2003 keeps crashing #2
I get this message when I look in System information. Outlook keeps
crashing quite often. I cannot for example delete two messages without
outlook crashing. My colleagues do not have this problem. We are using
the Microsoft mail exhange server.
Faulting application outlook.exe, version 11.0.5510.0, stamp 3f1380f0,
faulting module mso.dll, version 11.0.5606.0, stamp 3f334cce, debug? 0,
fault address 0x003b6e16.
Does anyone has a solution?=20
1) I would definitely apply Service Pack 2for Office 2003 + applicable
critical security updates.
2) Have you tried starting O...Transfer Money 98 to money 2004
I currently have Money 98 and i'am purchacing a new
computer with money 2004, how can i transfer my current
data to new computer w/ money 2004.
In microsoft.public.money, Brad Karris wrote:
>I currently have Money 98 and i'am purchacing a new
>computer with money 2004, how can i transfer my current
>data to new computer w/ money 2004.
If you have a USB flash drive on the old machine, copy your .mny
file there. Then copy the file to the new machine-- usually to your
"My Documents" folder. In Windows Explorer, double-left-click the
file on your new machine to ...MS Money 95 data files
I hope that some one can answer this for me.
I have used MS Money 95 for years, and it works just fine for me on Windows
XP, however, I now have to reformat my hard drive, and have discovered that
I can nolonger find my original install disk. Will the latest versions of
Money still read the MS Money 95 data files. All that I have ever used the
program for is to track my investments, and am unlikely to do any different
in the future.
In microsoft.public.money, Stan Banner wrote:
>I hope that some one can answer this for me.
>I have used MS Money 95 for years, and..."The connection to the Exchange server is unavailable. Outlook must be online or connected to complete this action"
I have setup a number of user accounts and the relative mailboxes without
However, since this afternoon, if I try and connect to a newly mailbox
through the email accounts wizard I get the following error message: "The
connection to the Exchange server is unavailable. Outlook must be online or
connected to complete this action".
This also occurs when I go to File>Open>Other User's Folder... and I try and
lookup an existing account/mailbox that I know I have permission to.
I know Outlook is connected to the Exchange server (I can ping, send and
receive emails) ...Outlook needs Outlook Express to work
I've installed my Outlook 2002 on my new Vista PC (I had Xp before). Now when
I start Outlook it says "requires Outlook Express 4.01 or greater". I've been
looking for Outlook Express to download and install but no joy. No CD came
with my new Vista PC. Any ideas, short of buying a more modern Outlook?
Vista doesn't actually support Outlook 2002 or older. Outlook Express is
part of Internet Explorer but with the advent of Vista, it was switched to
Windows Mail. There is no more Outlook Express.
You could attempt however to create a profile using workgroup or c...Outlook "Ruler" won't go away
I don't know how I turned this on so I don't know how to
turn it off. It splits my emails so that I can only type
so far over before it kicks me back to the left margin
and makes me start a new line. Can anyone help me?
we have one client pc with Outlook 2003 where the following problem
if a mail is replied from a user created sub folder of the inbox, the
reply will not appear in sent mails, but will end up in the same sub
folder, sender and recipient appear as identical. The mail goes out
properly though, it's just that Outlook sets internally sender =
recipient and bounces the reply back to the subfolder in which the
original mail is stored.
This happens on a Win 2000 machine with SP4 and all updates, the other
clients use Outlook 2000 or XP and there is no such problem.
There are no ru...Where is the workspace file stored?
I was given a project folder containing several dozen files. So where
is the workspace file normally located? If I don't have a workspace
file how can I cerate one? Using VC version 6. TIA
I haven't used VC6 for some time, but if I remember right you can just open
the .dsp file and it will create a .dsw file for you. It typically goes in
the same folder with the code.
"Phisherman" <firstname.lastname@example.org> wrote in message
>I was given a project folder containing several dozen files. So where
> is the wor...cant start outlook pst file to large
Hi I hope somebody may be able to help im new to outlook and now I cant start
outlook message says cannot open your default email folders pst file its too
large as I cannot open outlook I cannot delete old folders
See if this helps: http://support.microsoft.com/kb/296088
Ben M. Schorr, MVP
Roland Schorr & Tower
Author: The Lawyer's Guide to Microsoft Outlook 2007:
"Ray" <Ray@discussions.microsoft.com> wrote in message
news:B3B824DC-3C9B-4B1B-8EF3-61...Unexpected error message on closing an Excel file
Suddenly I am getting the following message when I try to close a workbook:
"Your formula contains an invalid external reference to a worksheet.
Verify that the path, workbook, and range name or cell reference are
correct, and try again"
The mysterious thing is that it does not happen consistently and that, after
I click OK after the above message, I can still save the file.
What might be the cause of this error message and can the "invalid
reference" be tracked down using one of the utility add-ins such as J.
If it only happens when you close ...Reminders in Outlook
Since upgrading to Great Plains 9.0, several users are not getting their
appointment reminders in Outlook 2003. They all show up at once after
rebooting computer. Outlook settings are set appropriately. Any ideas?
...Outlook default to paragraph
To whom ever can help,
> When using Microsoft Outlook, and starting a new E-
Mail, The default
> format is to "paragraph" which double spaces. Is there
> select under a New Message, Format, Style, "Normal" as
> Thank you in advance
>To whom ever can help,
>> When using Microsoft Outlook, and starting a new E-
>Mail, The default
>> format is to "paragraph" which double spaces. Is there
>> select unde...Change File Locations to Private Drive (not Folder)
I know that I can use "File Locations" in "Options" so that whenever I use
the "Open..." command in Word, it will open to a specific folder. I'm
wondering if there is a way that this can be applied not to a folder but to a
specific drive on a network.
Our company has a main public drive and has also assigned each of the Staff
their own private drive. Is there a way to access the "main page" (for lack
of a better term) of my private drive each time I use "Open..." in Word?
Right now it goes to "My Computer" or ...transferring to new pc
I had to replace my pc and to migrate my money files to
the new pc i first made a new backup diskette which I
then opened on my new pc. Afer downloading transactions,
the balances on about half my credit card and bank
account are slightly off. What gives?
...Drag and Drop file/directory names on Tree Control.
I am writing an application in which i have one Tree control.
Now i want that , when user drag & drop any file/folder on tree
control the file name/folder name should be add in the tree control
User may drag and drop file from desktop or may be from
I just want the path of that file/foder name nothing else.
so plz tell me will it be possible ...
Plz Help me.............
> I am writing an application in which i have one Tree control.
>Now i want that , when user drag & drop any file/folder on tree
>control the file nam...how do I connect an object from one page to a different page?
I am trying to connect an object from one page to a seperate object on a
different page. The instructions say to hold down your mouse button then
click on the point you want it connected too. My problem is that is doesn't
allow you to select the starting point of the connector, then select a
different page, then click on your end point of the connector. Please help!
try using a hyperlink.
"Pepper" <Pepper@discussions.microsoft.com> wrote in message
>I am trying to connect an object from one page to...Trying to read XML file into dataset
Developing a web site in VS2005, SP1, VB, .NET 2.0, ASP.NET 2.0 on XP Pro,
I eventually want to use a gridview table to view xml data, but right now i
can't seem to get my xml data into a dataset so that i can use it.
I have an XML file and can open it in IE. There is no XSD or XSL file to go
I can't seem to get the XML data into a dataset. I tried using the
following code, but it just does nothing. It doesn't give an error. It
just executes the code and does nothing.
Dim dataSet As DataSet = New DataSet
dataSet.ReadXml("...Linking information form one worksheet to another
Hi, i have a big problem
i want to create a link between some columns in two seperate worksheets, so
that when i type a name on the master sheet it would give me the required
information.Dont know if i explained this right, lets say on the master sheet
i have columns : Name,Sex and Height on columns A,D and BH respectively i
want that if i type a person's name in worksheet 2 it should give me the
results on columns A,C,F in that worksheet. Please help i need it asap for my
One way ..
Assuming your "master" sheet is named: Master, with data in row1 down
In Shee...Office 2003, Outlook (Outlook Today)...
OK, this is driving me nuts.
I note that w' 2003 (and XP (2002)?) the default install sets the
startup folder to the Inbox.
IIRC, one of the earlier Offices installed Outlook to startup w' that
"all in one view" - Outlook Today.
So just as a wee test - I thought I'd try that for a while, and indeed I
found it quite handy to be able to see all pertinent data on the one
*However* (and I'm wondering if this is the case with others), I *HAVE*
to use my mouse, whenever I switch to the Inbox, or Calendar, or Tasks
to get the damn focus onto a 'sujbect&...Outlook Express 6 w/multiple accounts
I have three accounts set up in Outlook Express 6. Two of
them work fine, but when I reply to or forward a message
sent to the third address, it uses the second address in
the "from" line, so I have to change it manually. This
does not happen with the other two. How do I fix this?
...opening .bak file
I hope someone can help!
I recently was performing a compacting operation on my outlook express
My computer shutdown due to a power failure and I lost some emails from a
few of my folders.
I was however able to get the .bak files (of the .dbx files that were lost)
out of the recycle bin.
If I could open one of these .bak files or convert it back to the .dbx file
from which it was created I would retrieve these emails.
Can anyone instruct me as to open this .bak file?
Thanks for any help!
How did you get the bak files out of the Recycle Bin?