Parsing data from one spreadsheet into another format
The data that we dump out of one machine comes in like below.
%AT_1300 Bottoms|Conductivity| (Water Out) InputRange VDC1to5
%AT_1300 Bottoms|Conductivity| (Water Out) Custom_Range_Low 0.0
%AT_1300 Bottoms|Conductivity| (Water Out) Custom_Range_Hi 0.0
%AT_1300 Bottoms|Conductivity| (Water Out) MinScale 0.0
%AT_1300 Bottoms|Conductivity| (Water Out) MaxScale 20.0
%AT_1300 Bottoms|Conductivity| (Water Out) EngUnits mhos
%AT_1300 Bottoms|Conductivity| (Water Out) StepResponseTime 1.0
%AT_1300 Bottoms|Conductivity| (Water Out) DigFiltTimeCnst 0.016
And I need to convert this data to this f...Outlook 2003 and "Check Names"
We are testing Outlook 2003 at our office now and there is
one very frustrating "feature" that is bugging all of us.
When we create a new e-mail message and type in the first
name of a person from the global address book and hit ctrl-
k to check the name...we get a response that Outlook
doesn't recognize the name and there are "no suggestions".
The only way Check Name will successfully resolve the name
is if we type it last name first (ie, Gates, Bill). This
was not the case in Office XP or Outlook 2000. You could
search by first name (or partial first name)...upgrade from mac office to pc?
Can you upgrade from Office 2004 for Mac to Office 2007 for PC for the
lower upgrade price? Or do I have to basically start over and buy
Office again for $250 - $300 or whatever it is, if I switch from Mac
and buy a new PC?
(I have Office '04 on my iMac. I'm weighing buying either a new iMac
or a new Dell. The cost of buying Office again makes the inferior-but-
cheaper Dell almost as expensive as a new Mac, alas.)
In article <email@example.com>,
"Charles T. Shay" <firstname.lastname@example.org> wrote:
> Can you upgrade from Office 2004...Crash on 'Send"
My wife's Intel Celeron running ME started having this problem
sporadically - now constantly.
Outlook 2000 receives OK - everything seems fine until you hit the 'Send'
button then Outlook crashes giving an error message that says 'Outlook has
caused an error in <unknown> and has to shut down. If the problem persists
you may have to restart your computer.'
Re-starting however has no effect.
I have re-installed Office. Used 'Detect & Repair' under the 'Help' tab, and
installed all patches/updates from the Office site. But this error
continues, now...data input in text box
We have a form which the operator enters data in a text box. Currently we
have a 'done' button on the form that the operator clicks to send the text
box info to a vba program. How can we send the text box info to the vba
program when the operator hits the enter key @ the end of the data entry for
the text box? TIA
In Christ's matchless name
ted & colleen
Use the control's AfterUpdate event.
Doug Steele, Microsoft Access MVP
(no e-mails, please!)
"ted" <n6trf@arr...Transferring over outlook data to new XP machine
How do I transfer over my old emails, address book to my
new XP machine? I have looked over the internet and found
nothing the tells me EXACTLY how to do this, any help
would be greatly appreciated.
If your using MS Outlook copy your .PST file across and import it into the new install.
>If your using MS Outlook copy your .PST file across and import it into the
No, don't import it. Simply use "File">"Open"
3290 Patterson Ave. SE, MS 1B3
Grand Rapids, MI 49512-1991
Brian.Tillman is the nam...MS Money 95 data files
I hope that some one can answer this for me.
I have used MS Money 95 for years, and it works just fine for me on Windows
XP, however, I now have to reformat my hard drive, and have discovered that
I can nolonger find my original install disk. Will the latest versions of
Money still read the MS Money 95 data files. All that I have ever used the
program for is to track my investments, and am unlikely to do any different
in the future.
In microsoft.public.money, Stan Banner wrote:
>I hope that some one can answer this for me.
>I have used MS Money 95 for years, and..."The connection to the Exchange server is unavailable. Outlook must be online or connected to complete this action"
I have setup a number of user accounts and the relative mailboxes without
However, since this afternoon, if I try and connect to a newly mailbox
through the email accounts wizard I get the following error message: "The
connection to the Exchange server is unavailable. Outlook must be online or
connected to complete this action".
This also occurs when I go to File>Open>Other User's Folder... and I try and
lookup an existing account/mailbox that I know I have permission to.
I know Outlook is connected to the Exchange server (I can ping, send and
receive emails) ...Outlook needs Outlook Express to work
I've installed my Outlook 2002 on my new Vista PC (I had Xp before). Now when
I start Outlook it says "requires Outlook Express 4.01 or greater". I've been
looking for Outlook Express to download and install but no joy. No CD came
with my new Vista PC. Any ideas, short of buying a more modern Outlook?
Vista doesn't actually support Outlook 2002 or older. Outlook Express is
part of Internet Explorer but with the advent of Vista, it was switched to
Windows Mail. There is no more Outlook Express.
You could attempt however to create a profile using workgroup or c...Exchange 2003 new install can not receive external email.
I have just setup a new Windows Server 2003 standard edition with
Exchange 2003 standard edition on it. I have been working for a while
trying to get it to receive external email. I can send out and send/
receive internal messages, but when someone trys to send me a message
from outside our network they get the following returned mail message
This Message was undeliverable due to the following reason:
Each of the following recipients was rejected by a remote mail
The reasons given by the server are included to help you determine
each recipient was rejected.
Recipient: <**...Outlook 2003 keeps crashing #2
I get this message when I look in System information. Outlook keeps
crashing quite often. I cannot for example delete two messages without
outlook crashing. My colleagues do not have this problem. We are using
the Microsoft mail exhange server.
Faulting application outlook.exe, version 11.0.5510.0, stamp 3f1380f0,
faulting module mso.dll, version 11.0.5606.0, stamp 3f334cce, debug? 0,
fault address 0x003b6e16.
Does anyone has a solution?=20
1) I would definitely apply Service Pack 2for Office 2003 + applicable
critical security updates.
2) Have you tried starting O...New Disk storage
I'm planning on adding a new SAN to our Exchange system (Active/Passive 2
node cluster) and this has been connected to the Exchange cluster nodes and
is accessible as shared disk storage.
But that isn't the question I've got, basically the mail stores are
currently located on a Powervault (Drive S:) and I need to present a plan for
moving this data (14 databases) onto the SAN storage, I can see two options
Option1) Use the ESM to migrate databases to new drive letter
1. Use exmerge to export all email to PST files (and ensure backup)
2. use the ESM utility to change the...How do I create several NEW templates from start to finish please?
Hi knowledgeable people.
I am looking for instructions on how to create a range of basic templates
that I can use, perhaps even by selecting them as 'stationery', for example;
if I go to >New >Format >Apply stationery, or any other similar method.
I can create new html stationery backgrounds, but this is NOT what I am
looking for, as a lot of people still read email in plain text only...does
this make sense?
Plain text templates would be fine.
I simply can't find any info on creating email templates anywhere to suit
this Windows Live Mail Desktop versio...Outlook 2003
we have one client pc with Outlook 2003 where the following problem
if a mail is replied from a user created sub folder of the inbox, the
reply will not appear in sent mails, but will end up in the same sub
folder, sender and recipient appear as identical. The mail goes out
properly though, it's just that Outlook sets internally sender =
recipient and bounces the reply back to the subfolder in which the
original mail is stored.
This happens on a Win 2000 machine with SP4 and all updates, the other
clients use Outlook 2000 or XP and there is no such problem.
There are no ru...cant start outlook pst file to large
Hi I hope somebody may be able to help im new to outlook and now I cant start
outlook message says cannot open your default email folders pst file its too
large as I cannot open outlook I cannot delete old folders
See if this helps: http://support.microsoft.com/kb/296088
Ben M. Schorr, MVP
Roland Schorr & Tower
Author: The Lawyer's Guide to Microsoft Outlook 2007:
"Ray" <Ray@discussions.microsoft.com> wrote in message
news:B3B824DC-3C9B-4B1B-8EF3-61...transferring to new pc
I had to replace my pc and to migrate my money files to
the new pc i first made a new backup diskette which I
then opened on my new pc. Afer downloading transactions,
the balances on about half my credit card and bank
account are slightly off. What gives?
...Outlook "Ruler" won't go away
I don't know how I turned this on so I don't know how to
turn it off. It splits my emails so that I can only type
so far over before it kicks me back to the left margin
and makes me start a new line. Can anyone help me?
...Transfer Money 98 to money 2004
I currently have Money 98 and i'am purchacing a new
computer with money 2004, how can i transfer my current
data to new computer w/ money 2004.
In microsoft.public.money, Brad Karris wrote:
>I currently have Money 98 and i'am purchacing a new
>computer with money 2004, how can i transfer my current
>data to new computer w/ money 2004.
If you have a USB flash drive on the old machine, copy your .mny
file there. Then copy the file to the new machine-- usually to your
"My Documents" folder. In Windows Explorer, double-left-click the
file on your new machine to ...HELP! Need to export hourly sales data on POS (NOT RMS)
How can I export hourly sales data across a date range? For instance, I
want to show hourly sales for the month of October so I can graph it and
post it in our break room.
If I can't export hourly data, can I export daily sales?
The built-in reports don't address this data format.
This is a multi-part message in MIME format.
Mark, This should work for you. Keep in mind it takes up to 5-10 minutes to
load...Sorting Data #5
Is there formula or anyway to be able sort the below data into a format that
I could create a pivot table on? I spend to many hours doing this every month.
Invoice #: 12345 Invoice Date: 1/16/1950 A/P Code: ABC
Due Date: 1/16/1950 Total Payable: $100.00 Reference: Freight:
Account #: 1234 Description: Name Reference 1 Amount: $100.00
Account #: 4321 Description: Name Reference 2 Amount: $100.00
Account #: 9876 Description: Name Reference 3 Amount: $100.00
Any help would be much appreciated!!
You need to show a Before and After version.
You still might not get any help, but your ...Creating new attributes
When using Schema Manager to create new attributes, I'm not able to create a
new attribute with "Lookup" as type, "Lookup" is not availabe as one of the
type options. But yet some of the exist fields, for example, in Account
table came with "Lookup" as type. Why? Is there a work-around? Please
You cannot add custom lookup's to the current release of MSCRM. The only way
around is to build a custom .aspx page and build your own. Might be possible
in the next release.
> When using Schema Manager to crea...Install Exchange 2003 Server on new Hardware with same name
I got a new server to move my Exchange Server Installation. I want to
keep the name I'm using now for my Server. Already read TechNet Article
"How to Move Exchange Server 2003 to New Hardware and Keep the Same
Server Name". Is there anything else that I should be aware of that is
not on this TechNet article? I'm using a different Disk Configuration,
does this matters? Should this be a smooth process?
Thanks for any help you can give.
The drive letters MUST match, because the paths of the databases are at the
Active Directory. The disks can have different sizes than the or...Reminders in Outlook
Since upgrading to Great Plains 9.0, several users are not getting their
appointment reminders in Outlook 2003. They all show up at once after
rebooting computer. Outlook settings are set appropriately. Any ideas?
...Outlook default to paragraph
To whom ever can help,
> When using Microsoft Outlook, and starting a new E-
Mail, The default
> format is to "paragraph" which double spaces. Is there
> select under a New Message, Format, Style, "Normal" as
> Thank you in advance
>To whom ever can help,
>> When using Microsoft Outlook, and starting a new E-
>Mail, The default
>> format is to "paragraph" which double spaces. Is there
>> select unde...HELP! remote data not accessible msg
I have a use who is currently using a Bloomberg DDE add-
in. Whenever he attempts to activate the add-in to
retreive remote data, the system hangs. If I go to task
manager, I then see a message stating "Remote data not
accessible. To access this data Excel needs to open
another program.... I have searched the knowledge base
and didn't find much help. Does anyone have any ideas? I
am desperate!!!! We are currently using Excel 2003 in XP