Recall Messages on Different Clients
I just have a query about Message Recalling. I haven't actually used it
much but today I just have.
I have attempted to recall a message and later found out that the
recipient's client is Apple Mail.
Do any of you know if Apple Mail supports message recalling, or if it is
unique to Outlook, and if my message is likely to be recalled.
Thanks is advance,
Message recall is specific to Exchange.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail s...Error Message after exporting MS Access Table
I receive the below error message when I export a table from a Microsoft
Access database to the Microsoft Word Merge format:
“The data being exported does not match the format described in the Schema.
Microsoft Access database is in .mdb format.
Message posted via AccessMonster.com
The main cause behind the above error message is that when you export the
table for the first time, the field names of the table for the Microsoft Word
Merge format get saved in the Schema.ini file. A schema.ini (schema
i...Duplicate messages from Inbox
I'm using OL2003 and have a large number of duplicate e-mail messages in my
Inbox, mostly as a result of interrupted downloads. Is there any easy way
(without using expensive third party tools) to remove these easily?
please check your Email Rules.
This mistake will be there if you have more than one Rules set on one email.
"Sitara Lal" <firstname.lastname@example.org> schrieb im Newsbeitrag
> I'm using OL2003 and have a large number of duplicate e-mail messages in
>...new and reply messages trapped in OUTBOX
test messages go through DSL service okay. Verizon says it is not their
when I create a message and hit send button it goes to OUTBOX. hitting send
all and send/receive all has no effect.
Try the troubleshooting steps listed here:
If that doesn't work for you, please post back.
Outlook Tips: http://www.outlook-tips.net/
> outlook 2003
> test messages go through DSL service okay. Verizon says it is not their
> ...message 'hyperlink can be harmful warning..etc...'
When I clink on a 'hyperlink' within an Excel Spreadsheet, the following
warning comes up.....
"Hyperlinks can be harmful to your computer and data. To protect your
computer, click only those hyperlinks from trusted sources. Do you want to
I would like to know how to STOP this message from coming up...[I know the
dangers I dont wish to have to click on Yes or No every time I click a link]
I share your frustration, but as yet I have found no way to keep MS from
protecting us from ourselves with this "feature". Macro Security Level has no
effect,...my free 60 day trial won't let me send messages-stuck in outbox?
emails are stuck in outbox-when I open and try to switch to a folder and then
send that doesn't work either. hmm??
You must activate the trial version of Office to get it to work. Then you
need to set up your accounts properly. Get the settings for your ISP's
servers from them. You cannot use Outlook for free HTTP mail accts.
> emails are stuck in outbox-when I open and try to switch to a folder and then
> send that doesn't work either. hmm??
"starj1900" <email@example.com> wrote in message
Yesterday I foolishly deleted my Outlook profile, now restored, but all
previous messages have been lost. Can they be recovered?
Best regards, Hywel
Search for file(s) with a .PST file extension. (Note: Remember to turn on
the ability to look in hidden/system folders as the default storage location
for .pst file types are marked this way under your OS user profile.)
"Hywel Thomas" <firstname.lastname@example.org> wrote in message
> Yesterday I foolishly deleted my Outlook profile, now ...Just Tested Opera 10.50
Runs good in windows 98
keep up the good work OPERA!
----- Original Message -----
From: "Hot-text" <email@example.com>
Sent: Tuesday, March 09, 2010 2:39 PM
Subject: Just Tested Opera 10.50
> Runs good in windows 98
> keep up the good work OPERA!
Thank you for your report. This is good to know since the Opera systems
requirements page no longer list Windows 98/ME as supported systems.
And it's good to know that there's at least one modern, fully up-to-date
browser fro Win 98/ME...Message preview on IMAP-account
It is impossible for me to remove preview of a message in inbox-view in an
This is Outlook XP/2002, and when I choose View and uncheck the "Automatic
preview", it disappear, but when I go into another folder an back, it is
Any hints anyone?
Try going to Views, Current view, Define view and changing the IMAP view by
selecting it's name (not <current view>) and choosing modify. This seems to
stick pretty good for me.
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Coauthor, On...Message delivery failed while delivering to the remote domain hotm
People can send mails from ms crm to other people within the domain, but
when they send a mail to a hotmail domain for instance, that mail never
reaches the recepient.
On the Crm Server, the event log shows this message:
Message delivery to the host '220.127.116.11' failed while delivering to the
remote domain 'hotmail.com' for the following reason: The remote server did
not respond to a connection attempt.
What could be the reason. Exchange specialists say it has nothing to do with
exchange, but all with Ms Crm. The mails never reach the exchange server, in
none of t...Message Size Limits #2
Can anyone tell me how to configure my Exchange 2003 server so that there is
a default incoming/outgoing size limit of 5 MB, but I can override this on a
user by user basis?
I have set the global settings with a 5 MB limit which will apply to all
users and then I brought up my account in ADUC and entered in 10 MB for the
sending/receiving limit. Should this override the global limit?
However, when I go to send a 7 MB email attachment nothing happens - it goes
directly into my Badmail folder skipping the outbound SMTP queue. I don't
ever even get an NDR back.
Hop...how to send data/message from win32 dll to mfc application?
Hi All ,
I have to send data from a Win32 DLL to mfc application. What are the
possible ways to achieve this?
In mfc application I have a document which should recieve this data .
is it possible ?
I read somewhere about PostMessage() method . it sends the message to
applcations main window (CmainFrm ???) .Should I handle the messages
sent by the dll and update my document from here ?
Thanks in advance
> Hi All ,
> I have to send data from a Win32 DLL to mfc application. What are the
> possible ways to achieve this?
> In mfc a...Cannot send Rich Text Messages in Outlook XP over VPN
When I try to use Outlook XP to connect to my company's
Exchange Server (we use Outlook 2000 at work) over my VPN
tunnel (using proprietary Lucent IPSEC software for
tunnel), I can receive messages, but I cannot send
message - I always get a "Network Problems are Preventing
Connection to the Microsoft Exhange Server" error.
If I send a Plain Text FOrmat message, the message is
delivered with no problem.
If I reply to a message, even if it is in plain text
format, it does not work.
...Can't send messages
I'm using a trial version of Office Outlook. I can receive messages, but
can't send them. I get the following error code (0x800ccc0F). Any
suggestions? I'm forwarding emails from an sbcglobal.net email address.
> I'm using a trial version of Office Outlook.
But apparently you don't which VERSION of some trial version you installed.
Neither do you mention if the prior NON-trial version of Outlook was
working, or if you uninstalled it BEFORE installing the trial version (or if
you had the trial's installation remove the prior...Outlook 2000 "Mail Delivery Error" message
I just installed a new hard drive (standard install using the software
the copies the old drive to the new drive, remove old drive, reboot,
viola new drive installed) and ever since my Outlook has stopped
working. I can double-click Outlook, get in and see my old mail, but
when I click 'send/receive' it goes out, logs into the POP3 server,
sees that I have (some number of messages), increments through them,
then errors out with a delivery error. It's almost like it can't
write to my mailbox any more. I'm not sure what to look at next on
this one. Anyone?
...Rate Type Error Message
In Financial Batch Edit List this error message came out: "The rate type ID
is not associated with the currency ID for this transaction"
...Outlook 2000: Messages stuck in Outbox and not transferred to Sent folder
In Outlook 2000, I send a message. The recipient receives
the message without incident, but the message remains in
the Outbox and a copy is NOT sent to the 'Sent' folder.
The following 2 articles do NOT fix the problem. Any help
195924 OL2000: Error Message That Sent Items Remain in
195778 OL2000: (CW) Email Does Not Leave the Outbox
...message queuing on integration server
By any chance has anyone experienced the problem of not
being able to install message queuing? every time I do
the install through add/remove programs, it comes back
saying the MSMQ service failed to start. Please look at
teh application log in event viewer for possible
problems. There isn't anything in the application log. I
can't move forward to installing integration until I get
msmq installed...any ideas???? - it is on 2003 server.
If you uninstall and then reinstall MSMQ you will find it
usually clears up and data corruption that it had which
cause it to fa...Outgoing messages stripped
Re Outlook 2003 on Windows XP.
Last few days when I send a message (text, html or rtf)
the email is sent complete with header, Subject line, and
attachment (if there is one) BUT the main body of the
message is not sent, nor the signature.
If I forward or reply to an existing email, the header,
subject and attachment are sent, the message body is
stripped along with any additions.
In the sent folder the message body is empty.
If I go to Outlook Express and send, everything works
...Can't open message attachment in Outlook 2007
Recently if I am getting Outlook message attached to a mail I can't
open it. I don't have any other problems with other attachments
I also can't open the message if I save it to local folder first and
then open it.
Your help will be appreciated!
firstname.lastname@example.org <email@example.com> wrote:
> Recently if I am getting Outlook message attached to a mail I can't
> open it. I don't have any other problems with other attachments
> I also can't open the message if I save it to local folder first and
> then open it.
Google Desktop ...Outlook Express causes timeout when retrieving some messages by pop3
I heve been experiencing a problem with pop3 service within exchange 2000
sp3 running on a windows 2000 sp4 server. There are some malformed emails
that causes the pop3 session with Outlook Express clients to timeout
resulting the clients destinations of such messages are uncapable to
retrieve any more messages. he workaround we use is to login to the mailbox
by using Outlook Web Access, then delete the offending message. These
messages are mainly spam and/or viruses but it have been valid messages also
with this problem. Note this is a kind of denial of service, but only the
dest...reply: original messages partially lost #2
Content-Type: text/plain; charset=us-ascii
When replying to an email, the sender's portion gets lost...
Sequence of events:
I send a msg to correspondant. Correspondant replies
I get reply. It contains both her msg and my original message.
I press reply. The msg displayed for me to reply contains my original
message, but NOT Correspondant's reply.
What is happenning and how can be fixed?
Content-Type: text/html; charset=us-ascii
<!d...Error Message Unhandled Object Exception
We have two users that receive this message upon logging in to GP v9. Also,
periodically this message pops up during entering of AP transactions on
average of about once per hour. They click "ok" and can continue, but
obviously we need to clean this up. It just started two months after
They both have revised dictionaries for check printing and other users do not.
Thanks for your help
this could be a bug that is from the customization. I suggest contacting the
developer/partner who did the customization. You mentioned about "the error
came...Messages not routing to the correct mailbox
I have setup multiple recipient polices for different email domains. However,
the mail from the different domains doesn't go to the correct mailboxes, it
all ends up in my mailbox for some reason.
I have made sure the email address is added to the users account. If I try
and send mail to an account that doesn't exist it gets bounced, which it
should. If I send email to say firstname.lastname@example.org it comes in and ends up in my
mailbox, in the to: field it shows Bob Smith, not email@example.com mso I know
it's matching it against there account. I have no idea why I get it. I don't
have a...How do I configure the MS-Outlook to send messages offline ?
How do I configure the MS-Outlook to send messages offline ?
"rakeshalhan" <firstname.lastname@example.org> wrote in message
> How do I configure the MS-Outlook to send messages offline ?
Tools-Send/Receive Settings-Define Send/Receive Groups and check the boxes
under When Outlook is Offline