Exchange for remote users/offices
Up to this point i've used SBS 2003 with POP3 (using Popbeamer)...the
reason i chose this from the get go was because we have about 15 users
here on site and about another 20 that are scattered across the globe.
I didn't want to be in charge of mail for those that weren't here
remotely, so figured just using the POP3 route was the way to go.
Well, i'm preparing to move to SBS 2008 and REALLY want to set it up
as a true Exchange server hosing the mail. But, again, am not sure i
want to deal with the other 20 users if i don't have to. So, is there
a way to set up ...Outlook 2003 and "Check Names"
We are testing Outlook 2003 at our office now and there is
one very frustrating "feature" that is bugging all of us.
When we create a new e-mail message and type in the first
name of a person from the global address book and hit ctrl-
k to check the name...we get a response that Outlook
doesn't recognize the name and there are "no suggestions".
The only way Check Name will successfully resolve the name
is if we type it last name first (ie, Gates, Bill). This
was not the case in Office XP or Outlook 2000. You could
search by first name (or partial first name)...Transferring over outlook data to new XP machine
How do I transfer over my old emails, address book to my
new XP machine? I have looked over the internet and found
nothing the tells me EXACTLY how to do this, any help
would be greatly appreciated.
If your using MS Outlook copy your .PST file across and import it into the new install.
>If your using MS Outlook copy your .PST file across and import it into the
No, don't import it. Simply use "File">"Open"
3290 Patterson Ave. SE, MS 1B3
Grand Rapids, MI 49512-1991
Brian.Tillman is the nam...Crash on 'Send"
My wife's Intel Celeron running ME started having this problem
sporadically - now constantly.
Outlook 2000 receives OK - everything seems fine until you hit the 'Send'
button then Outlook crashes giving an error message that says 'Outlook has
caused an error in <unknown> and has to shut down. If the problem persists
you may have to restart your computer.'
Re-starting however has no effect.
I have re-installed Office. Used 'Detect & Repair' under the 'Help' tab, and
installed all patches/updates from the Office site. But this error
continues, now...Exchange update problem
I have tried to upgrade exch2k3 sp1 to sp2, but the update fails with "the
file pcproxy.dll is in use, and setup cannot identify the app or srvc. setup
Any clues/ideas/suggestions? Please.
This message has been checked for all known viruses.
The information contained in this e-mail and any attachments is confidential
and may be the subject of legal, professional or other privilege. It is
intended for the named addressee only and may not ...Outlook needs Outlook Express to work
I've installed my Outlook 2002 on my new Vista PC (I had Xp before). Now when
I start Outlook it says "requires Outlook Express 4.01 or greater". I've been
looking for Outlook Express to download and install but no joy. No CD came
with my new Vista PC. Any ideas, short of buying a more modern Outlook?
Vista doesn't actually support Outlook 2002 or older. Outlook Express is
part of Internet Explorer but with the advent of Vista, it was switched to
Windows Mail. There is no more Outlook Express.
You could attempt however to create a profile using workgroup or c..."The connection to the Exchange server is unavailable. Outlook must be online or connected to complete this action"
I have setup a number of user accounts and the relative mailboxes without
However, since this afternoon, if I try and connect to a newly mailbox
through the email accounts wizard I get the following error message: "The
connection to the Exchange server is unavailable. Outlook must be online or
connected to complete this action".
This also occurs when I go to File>Open>Other User's Folder... and I try and
lookup an existing account/mailbox that I know I have permission to.
I know Outlook is connected to the Exchange server (I can ping, send and
receive emails) ...Exchange 2003 new install can not receive external email.
I have just setup a new Windows Server 2003 standard edition with
Exchange 2003 standard edition on it. I have been working for a while
trying to get it to receive external email. I can send out and send/
receive internal messages, but when someone trys to send me a message
from outside our network they get the following returned mail message
This Message was undeliverable due to the following reason:
Each of the following recipients was rejected by a remote mail
The reasons given by the server are included to help you determine
each recipient was rejected.
Recipient: <**...Outlook 2003 keeps crashing #2
I get this message when I look in System information. Outlook keeps
crashing quite often. I cannot for example delete two messages without
outlook crashing. My colleagues do not have this problem. We are using
the Microsoft mail exhange server.
Faulting application outlook.exe, version 11.0.5510.0, stamp 3f1380f0,
faulting module mso.dll, version 11.0.5606.0, stamp 3f334cce, debug? 0,
fault address 0x003b6e16.
Does anyone has a solution?=20
1) I would definitely apply Service Pack 2for Office 2003 + applicable
critical security updates.
2) Have you tried starting O...[Exchange 2003] Mail enabled public folder and sender address
I have a Windows 2003 domain with a native mode Exchange 2003 organization;
there are some mail enabled public folders.
When a user replies to a message in a public folder, the outgoing mail's
sender address is the user's one; I want it to be the public folder's one,
or at least I'd like the "reply-to" address to be set to the public
How can I accomplish this?
You would need to grant the user permissions to be able to Send As the
public folder. By default, when you reply to a message that is in a PF, the
PF is not composing the ...cant start outlook pst file to large
Hi I hope somebody may be able to help im new to outlook and now I cant start
outlook message says cannot open your default email folders pst file its too
large as I cannot open outlook I cannot delete old folders
See if this helps: http://support.microsoft.com/kb/296088
Ben M. Schorr, MVP
Roland Schorr & Tower
Author: The Lawyer's Guide to Microsoft Outlook 2007:
"Ray" <Ray@discussions.microsoft.com> wrote in message
news:B3B824DC-3C9B-4B1B-8EF3-61...Default Roles and Tasks in Canadian Payroll
Installs of Dynamics GP version 10 should have default Security Tasks and
Roles pre-installed. Currently all tasks and roles have to be built from
scratch - causing many customers to delay migration to the version 10.
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.
we have one client pc with Outlook 2003 where the following problem
if a mail is replied from a user created sub folder of the inbox, the
reply will not appear in sent mails, but will end up in the same sub
folder, sender and recipient appear as identical. The mail goes out
properly though, it's just that Outlook sets internally sender =
recipient and bounces the reply back to the subfolder in which the
original mail is stored.
This happens on a Win 2000 machine with SP4 and all updates, the other
clients use Outlook 2000 or XP and there is no such problem.
There are no ru...Outlook "Ruler" won't go away
I don't know how I turned this on so I don't know how to
turn it off. It splits my emails so that I can only type
so far over before it kicks me back to the left margin
and makes me start a new line. Can anyone help me?
...Addressing within Exchange 2003
We are running Exchange 2003 SP2. We setup an MX record for a external
email(alumni.cup.edu) these mailboxes do not exist within our exchange org.
But when we send email to these externals email mailboxes we are getting the
#5.5.0 smtp;550 Mailbox unavailable.
Is there a way in exchange to ignore these email address so that we don't
get the NDR from within our Exchange Org?
On Fri, 4 Aug 2006 08:08:02 -0700, Sabo, Eric <firstname.lastname@example.org> wrote:
>We are running Exchange 2003 SP2. We setup an MX record for a external
>email(alumni.cup.edu...Install Exchange 2003 Server on new Hardware with same name
I got a new server to move my Exchange Server Installation. I want to
keep the name I'm using now for my Server. Already read TechNet Article
"How to Move Exchange Server 2003 to New Hardware and Keep the Same
Server Name". Is there anything else that I should be aware of that is
not on this TechNet article? I'm using a different Disk Configuration,
does this matters? Should this be a smooth process?
Thanks for any help you can give.
The drive letters MUST match, because the paths of the databases are at the
Active Directory. The disks can have different sizes than the or...Exchange 2k3 imap VS startup
I have an E2k3 SP1 enterprise edition server. Whenever I reboot, the IMAP4
Virtual server does not start back up. I have to go into Exchange System
Manager and manually start it.
How do I make it start automatically?
How is the service set up - to start manually or automatically? Also, I'd
check the dependencies the service has. It may be that it's trying to start
before the other services have completed starting.
"Tim" <email@example.com> wrote in message
I have an E2k3 SP1 enterprise edition serve...Reminders in Outlook
Since upgrading to Great Plains 9.0, several users are not getting their
appointment reminders in Outlook 2003. They all show up at once after
rebooting computer. Outlook settings are set appropriately. Any ideas?
...Outlook default to paragraph
To whom ever can help,
> When using Microsoft Outlook, and starting a new E-
Mail, The default
> format is to "paragraph" which double spaces. Is there
> select under a New Message, Format, Style, "Normal" as
> Thank you in advance
>To whom ever can help,
>> When using Microsoft Outlook, and starting a new E-
>Mail, The default
>> format is to "paragraph" which double spaces. Is there
>> select unde...Exchange 2007 across account search
Does Exchange 2007 has an option to search all users mail for keywords?
That all SBS workgroup users can search for messages to/from all other
Is there any advanced indexing system to speed up search results?
On Tue, 26 Jan 2010 14:22:12 +0200, "Ronald" <firstname.lastname@example.org> wrote:
>Does Exchange 2007 has an option to search all users mail for keywords?
>That all SBS workgroup users can search for messages to/from all other
>Is there any advanced indexing system to speed up search results?
Bunch of ...Exchange clusters
I am running two exchange2k3 server clusters on win2k3 servers. I am going
to install service pack 2 for exchange2k3. Which cluster do I install it on
first? The active cluster or the passive cluster?
Do you mean you're running one cluster with two nodes?
If you were to install on the active node, Exchange will shut down and the
passive node will become the active node. So, it's clear that you should
install first on the passive node, fail over, then install on the passive
node (which was formerly the active node).
Ed Crow...Office 2003, Outlook (Outlook Today)...
OK, this is driving me nuts.
I note that w' 2003 (and XP (2002)?) the default install sets the
startup folder to the Inbox.
IIRC, one of the earlier Offices installed Outlook to startup w' that
"all in one view" - Outlook Today.
So just as a wee test - I thought I'd try that for a while, and indeed I
found it quite handy to be able to see all pertinent data on the one
*However* (and I'm wondering if this is the case with others), I *HAVE*
to use my mouse, whenever I switch to the Inbox, or Calendar, or Tasks
to get the damn focus onto a 'sujbect&...Outlook Express 6 w/multiple accounts
I have three accounts set up in Outlook Express 6. Two of
them work fine, but when I reply to or forward a message
sent to the third address, it uses the second address in
the "from" line, so I have to change it manually. This
does not happen with the other two. How do I fix this?
...Moving Contacts to Outlook Address Book
Need some help. How do I move the names and email
addresses from my Contacts list to my Outlook Address
Book. When I click on the Outlook Address Book it is
empty, but when I click on the Contacts List all the
names are there. I am using Outlook 2002. Any help
would be appreciated, Thanks Bob
What is the problem?
The OAB should be empty. Entries reside in the Contacts Folder.
"Bob R" <email@example.com> wrote in message
> Need some help. How do I ...DNS Error on Exchange
I am getting the following error on my Exchange server. What is my problem?
Event Type: Warning
Event Source: smtpsvc
Event Category: None
Event ID: 2012
Time: 12:01:53 PM
SMTP could not connect to the DNS server '184.108.40.206'. The protocol used
was 'UDP'. It may be down or inaccessible.
For more information, see Help and Support Center at
0000: d5 04 00 00 Õ...
Is that a DNS server that's configured on your Exchange box? It shoul...