Can E-mail recipient policy be linked to the OU membership?
Running Exchange 2003 (mixed mode) and Windows 2003 server (Windows 2000
I'd like to create a e-mail recipient policy that is linked to the different
OU's that are created on the system.
Is it possible to link the policy to a specific OU or do I need to create
groups on the AD to control which recipients a policy applies to?
Yes, you can create a recipient policy that looks to just a specific OU. It
is done through LDAP queries. Here are some references to articles and
whitepapers that discuss how to work with recipient policies.
HO...Outlook Send/Receive mail SLOW
When I receive/send email, it loads sends/receives
extremely slow. The percentage indicator when
receiving/sending starts at 3-5% and stays that way for
awhile. After several minutes, the mail eventually comes
Any reason for this?
...Setting up a new e-mail account
I'm trying to set up my yahoo account so that I receive
my e-mail messages in my Outlook Inbox. I went to
Accounts, and servers, and put in mail.yahoo.com for
incoming mail (POP3) and smtp.yahoo.com for outgoing mail
(smtp). When I click on the send/receive button I get an
Dave <email@example.com> wrote:
> I'm trying to set up my yahoo account so that I receive
> my e-mail messages in my Outlook Inbox. I went to
> Accounts, and servers, and put in mail.yahoo.com for
> incoming mail (POP3) and smtp.yahoo.com for outgoing mail
&...Receiving POP3 mail into Outlook without Send/Receive
I want the POP3 mail to be received into Outlook (If open) when the mail
arrives in POP3 account. Is that possible?
Set an Automatic Polling Interval.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
After furious head scratching, delanda asked:
| I want the POP3 mail to be received into Outlook (If open) when the
| mail arrives in POP3 account. Is that possible?
...Replying to an Outlook e-mail
When replying to e-mail in Outlook, everything works fine. But when I try to
reply to an e-mail that has an embedded picture in it, Outlook won't send it.
I get the message that the e-mail was sent, but it stays in the outbox and
"Jack Johnson" <firstname.lastname@example.org> wrote in message
> When replying to e-mail in Outlook, everything works fine. But when I try to
> reply to an e-mail that has an embedded picture in it, Outlook won't send
&...I want to add a mail account without setting a SMTP server. Is it possible?
I want to add a second mail account that is outside my company.
Since the company firewall does not allow us to connect to SMTP-servers I
to add this account without setting the SMTP propertiy.
I cannot specify the company server as it is an Exchange server and the
outside one an IMAP one.
Currently I have specified the outside SMTP server since outook does not
allow me to add an account wihtout setting this.
I keep getting annoying error messages as my computer can't connect to the
Any one know a way around this?
The company server has SMTP enabled, u...How to save Japanese characters in CSV format of Excel ?
I would like to know, how to save the Doubly-Byte characters.For example,
Japanese in CSV of Excel.Here are the steps, I tried.
1. Open Excel
2. Copy pasted the Japanese charactesrs in a cell.It is displaying the
3. Save as CSV(Comma seperated file)
It is saving as ??????.
Thanks in advance for the info.
We have been rolling out new Windows 7 workstations (all new computers) at
work over the last few months and a strange problem has developed. Prior to
Windows 7 we were using Windows XP with Office 2007.
The problem is, we have a workbook which uses a UserForm for filling in all
required information. Prior to rolling out the new Windows 7 workstations,
the workbook and UserForm were working flawlessly (for over a year) and they
still work flawlessly on the first 3 Windows 7 workstations but on the last
2 workstations we rolled out if you open the UserForm and leave it open for
...Saving e-mail & attachments when upgrading
I'm upgrading from NT4 to XP Home and the only data I need
to keep are the emails & attachments. I have to format the
hard drive to eliminate the partitions. This machine is on
a network and I can save to the other machune.
Look here for all the information you need on backup and restoration of
MVP - Outlook
*** Replies sent to my e-mail address will probably not be answered --
please reply only to the newsgroup to preserve the message thread. ***
"Mike" <email@example.com> wrote ...how to install Microsoft Mail to Outlook 2003
I found 'this' (http://www.outlook-tips.net/howto/msmail.htm) on
I don't know if it works...
~~ Message posted from http://www.ExcelTip.com/
~~View and post usenet messages directly from http://www.ExcelForum.com/
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Coauthor, OneNote 2003 for Windows (Visual QuickStart Guide)
Outlook Tips: http://www.outlook-tips.net/
Search for answers: http://groups.google.com
Most recent posts to the Outlook newsgroups:
...Duplicate E-Mail #4
Every time I get e-mail from certain users I get their e-mail twice. I
have not been able to figure out why this is happening. Is it their
fault or my fault and if it is my fault, how do I fix it?
Alfred Kaufmann <firstname.lastname@example.org> wrote:
> Every time I get e-mail from certain users I get their e-mail twice. I
> have not been able to figure out why this is happening. Is it their
> fault or my fault and if it is my fault, how do I fix it?
See if this helps: http://www.howto-outlook.com/faq/duplicates.htm
Brian Tillman [MVP-Outlook]
...Entourage (allegedly) cannot see message body sent by OWA
We have a external company receiving emails from us and claim they cannot see
the message body when the email is sent from OWA. We are on 2003 SP2 btw.
The external party claims that the following patch for OWA fixes the problem
I am sceptical!
I just saw another thread wit hthe details for this one.
"OWA message text disappears"
"Peter T" wrote:
> We have a external company receiving emails from us and claim they cannot...Odd e-mail duplication problem
All e-mails promoted or Tracked in CRM Outlook client are being copied to one
particular Account that is unrelated. The e-mails are copied correctly to the
history of the desired accounts and Contacts but also copy to one particular
Accountl as well.
As anyone seen anything like this and have any ideas what could be wrong?
Darryl - email@example.com -www.mtccrm.com - Only Microsoft CRM
...Exchange 2003, Two Sites, Two Smarthosts, One Domain, No Internal mail!!
Hi, I hope there is someone out there who can point me in the right
We have two sites, Brisbane and Sydney, connected by a frame realy
connection. Sydney is currently running exchange 2003 (upgraded by
migration from exchange 5.5 about a month ago). Brisbane is currently
running their mail through sendmail and sendmail only. We have just
installed exchange 2003 on server 2003 box in Brisbane and are trying
to get the two sites working in two routing groups.
The topology will be the same in both Brisbane and Sydney, in that
each city will have an external mail server running sendma...Windows mail asking to verify username and password
I was in Windows Mail when suddenly a box popped up asking for my username
and password from Windows Mail.. Although I attempted correctly several times
it still will not work. I contacted my kerrlake server and we tried several
things including deleting the account and resetting it back up but it still
will not open. I can receive my emails on my blackberry and can get on the
internet. Also, a protocal error message pops up. Please help!
Diamond & Associates
When you get that repeated prompt for username and password, click =
which should then produce an erro...Start macro creating a mail with contact data and autotext
I am working with an user form.
The developing of that form started with Outlook XP with a lot of code
inside for different buttons.
I changed to Outlook 2007 and unfortunately the code of the form was not
What I learned about this is that MS does not support to much code in the
form (or maybe a bug).
They also do not support any longer.
I was sending this form to MS support but they told it is do much code
inside and they do not know, why the code is not displayed.
In Outlook 2003 the code is displayed as in Outlook XP.
Because I do not know real...IM Add New Batch
GP 10 on 2003 Terminal Server.
How do you create a Payables Batch in the IM in preparation for importing to
the Payables Transaction destination? Alternatively, how must GP be set up to
ensure that the “Add New Batch” rule works correctly?
With the Add New Batch rule set the IM crashes (see my post Integration
Manager 10 Crashes). Additionally the characteristics of the Add New Batch
rule do not match the required information which I understand to be Origin
and Checkbook ID.
I figured there might be some default settings for Origin and Checkbook ID
in the setup somewhere but was not a...Help! charts disappearing, new charts crashing powerpoint
When i open a presentation the charts vanish...i have restarted, they come
back. I try to edit a chart, and it crashes powerpoint after a few clicks.
What can I do...whole afternoon going crazy!
If you are using v 2007 there is a hotfix which is meant to cure some chart
john ATSIGN PPTAlchemy.co.uk
Free PPT Hints, Tips and Tutorials
> When i open a pres...Moving exchange 5.5 to a new server exchange 2003
Good day all... how do I move exchange 5.5 to a brand new
exchange server 2003. The new server will be in a new
organization. Any info would be greatly appreciated.
Microsoft MVP - Terminal Server
>Good day all... how do I move exchange 5.5 to a brand new
>exchange server 2003. The new server will be in a new
>organization. Any info would be greatly appreciated.
...Sending E-mails at a defined time with MS Exchange Server
We're using MS Exchange Server at the office.
We have around 150 e-mail accounts set up.
Some of our users are sending enourmous attachement (~100 Mega) and
sometimes to 50 different addresses.
During the day this is chewing up all our bandwith.
What we would like to know if it's possible in Exchange
to define that sort of rule :
- Send e-mails with an attachment bigger than 8 M�g only after 20h00 ? (so
they don't chew up the bandwith during the day as this has an impact on our
FTP transmission module and our client server applications)
Or maybe an add-on ?
Any suggestions...proper casing mail merge
I have a mail merge document where all the information is in ALL CAPS. Is
there a quick way to turn into Proper casing?
Select the whole text, Format, Change Case, you will now have various options
to choose from.
Also, note that Shft+F3 toggles between no caps, Initial caps, and all caps.
Hope this helps
> Hi All,
> I have a mail merge document where all the information is in ALL CAPS. Is
> there a quick way to turn into Proper casing?
thanks, that help...open outlook new email form from a crm form
It would be great to be able to open a New Email form (outlook form) by
pressing a button on the Contact, Account or Opportunity etc. form in CRM.
Customers like to use outlook for email and currently there is a disconnect
in that if you are on the opportunity screen and you would like to email the
Potential Customer (and have regarding on the email linked to the Opprotunty)
you have to leave the screen and start a new email in Outlook and lookup the
opportuninty you already have open again to populate the regarding if you
want to use Outlook. You could use Email button, but browser ema...Exchange 2003 Web Mail.. Disappearing content.
I have a strange situation brewing that I haven't been able to figure out yet.
About once a day, my Exchange 2003 server forgets how to display email content. That is, when a user tries to open ANY email, it opens, but there is NO content. The only solutions I have come up with are temporary: 1) Reboot the server (which can take in excess of 15 minutes), or 2) Restart the MS Exchange Store service. Sometimes I have to restart the IIS web site where webmail is configured and running
Specs on the server are
2ghz P3 with 1gig RAM w/ Windows 2003 Enterprise Serve
I wo...A Domain Is Rejecting My Mail
I'm starting to pull my hair out on this one and would appreciate any
assisstance you could provide. I've got two Exchange 2003 servers. I can
send to everyone on the planet with no problems - except this one particular
domain. When I send to them, I get the following returned:
The following recipient(s) could not be reached:
Nobody@special.com on 9/28/2004 8:30am
There was a SMTP communication problem with theh recipient's email server.
Please contact your system administrator. <mail3.hearthnhome.com #5.5.0
smtp;501 Failure Bad FROM: RCPT TO (5188.8.131.52 <>...Domain name...Connectning Outlook to MSN mail account (server names)
I need help trying to connect my outlook to my free MSN
mail account. Please help, I need the server names to
figure this out or a step by step guide to set this up.
I have Microsoft Outlook 2000
please read this here
Ich habe nichts gemacht, gestern gings noch!
Bitte in den Newsgroup antworten damit jeder etwas davon hat.
"Steve" <firstname.lastname@example.org> schrieb im Newsbeitrag
> I need help trying to connect my outlook ...