Send Emails With A Different Name Than How Its Listed in the GAL

Hi all, I have a quick question:

My client is unhappy with how his emails get sent out from MS Outlook.
The GAL on our server lists names as [Last Name], [First Name]. This is
how the majority of our clients want it. However, he wants his to be
[First Name] [Last Name]. So, all recipients getting emails from him
will see his name as First Name, Last Name. We can't do this for him on
our GAL, since it would obviously cause an inconsistency if we did it
only for one name. But, I figured I'd post here to see if anything else
can be done to accomodate him.

Thanks in advance for your help!

0
rajwani (9)
3/8/2006 3:15:56 PM
outlook 87535 articles. 11 followers. Follow

0 Replies
287 Views

Similar Articles

[PageSpeed] 43

Reply:

Similar Artilces:

How to shift address listings from row list to columns?
I have a mailing list with name, address, city, state & zip with each item in individual rows like a list of labels and a few empty rows of space between each listing. How do I create/transfer this list into columns accross so I can sort by city or zip? Thank you! If your data is nicely grouped, with each group in 5 lines, viz: name add city state zip then an earlier suggestion given which worked might be worth a try: See: http://tinyurl.com/wgcb -- hth Max ----------------------------------------- Please reply in newsgroup Use xdemechanik <at>yahoo<dot>com for email --...

Downloading Old Emails
Outlook (2003) keeps downloading emails from my account that it has already downloaded. I have changed any settings and I've checked the settings I do have and I can't figure out why it does this. I have it set to retain emails on the server for 7 days. But it keeps downloading the same emails over and over again. At one point, it was close to 150 emails. I went on to the server and deleted them. But it's still doing it for the new emails I received after that. It just started doing this a couple weeks ago. It did it once and then behaved normally until a cou...

High score list?
How do I create a high score list for an everlasting soccer tournament? Perhaps something along these lines .. (Only takes 5 mins to set-up <g>) Assume the table below is in Sheet1, cols A to C, data from row2 down Game# Scorer Goals 00001 ABC 1 00002 XYZ 3 00003 ABC 3 00004 XYZ 2 Put in E2: =IF(B2="","",IF(COUNTIF($B$2:B2,B2)>1,"",ROW())) Copy E2 down to say, E1000 to cover the max expected number of rows of data in the table Col E will flag and assign uniques in col B with an arbitrary row number (for us to extract the list of unique scorers in Sh...

setting up multiple email accounts #2
I followed the rules for setting up the pop3 and smtp accounts for multiple mail accounts, but when I access outlook express the additiona account does not recognize the password I've asked it to remember. HELP! KCB <anonymous@discussions.microsoft.com> wrote: > I followed the rules for setting up the pop3 and smtp > accounts for multiple mail accounts, but when I access > outlook express the additiona account does not recognize > the password I've asked it to remember. HELP! Ask in an Outlook Express newsgroup. -- Brian Tillman ...

Not in list where cbo is null ie. tab through
Hi knowledgeable gurus, I have made use of "not in list" but in this instance I know that the record doesn't exist & as such I want to just tab through but invoke the "Not in List" sub. Can I do that in a before update without duplicating the whole code? What should I be doing as I don't want to add extra buttons etc You can just call the NotInList code directly with CALL Yourcbo_NotInList but I would lean toward executing a similar but different procedure. You can not pass the Response variable to the procedure so the code will almost certainly be...

avoiding duplicate in list
Dear All, I have created a list with a name for ex A1 : A25 named as number in this number list there are few numbers repeated i want to list the date without duplicating. I want to list the above date in a cell (using DATA >> VALIDATION >> LIST Cud plz help on this... Thanx and regds. CNP -- chinaprasad ------------------------------------------------------------------------ chinaprasad's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=8621 View this thread: http://www.excelforum.com/showthread.php?threadid=267171 Hi see: http://www.cpearson....

mail sending problem
Hi , I am very new in the exchange server just now I have deployed Microsoft Exchange Server 2003 at my organization now i have some problem in that . I am able to send mail outside the domain except yahoo .whenever I am sending mail from my exchange mail id to any yahoo mail id it is showing me mail has been sent but on yahoo id it is not delivering even I am not getting the DFR, second I wants to know that can we take the backup of single mail box (boxs) and please tell me step by step how can we take backup (at least the location ) Thanks in Advance Madi The most probable reason is t...

Unattend configure Send/Receive Group / PRF file -Outlook XP
Hi, Have to rollout 4000 laptops with Offline Storage enabled. I want to automatically configure outlook to: - use OST file - Synchronize when logging on and off - Download and sync. the general address book I have made a PRF file (using CIW) that creates OST file...so far so good... But I can't unattend set the option to sync when logging on and off. It seems this setting is stored in an SRS file in the users profile!! Second item, default the first address book in the list is synchronised. Is there a way to auto configure Outlook XP to sync OST fiel when logging on and off, (ins...

Can't send e-mails from Outlook 2003 after SP1
After installing service pack SP1 for Office 2003, I can't send e-mails anymore. They are stuck in the outbox folder. The error message states that the connection to the server was interrupted. I did not change any settings and checking them confirms that everything is as it should be. Did anyone else experience the same issue and how did you resolve it? Thanks for your help Matthias See if you can manually move those messages from your Outbox and then check all your settings again. "Mattliusa" <anonymous@discussions.microsoft.com> wrote in message news:cb7401c48a5...

Line Graph with two different data points
Hello, I am trying to create a line chart with numbers from my product Vs a competitor. The problem i am having is how can i make a chart that will have four data points comparing to each other? For example Product A- 1.5 1.2 1.6 1.8 Product B- 2.0 1.1 1.2 1.3 Product A- 70% 20 % 30% 67% Product B- 65% 30% 65% 55% How do i get all of these numbers on one chart? Is a line chart correct. I want to see these numbers compared?? Thank you so much Hi, Since the number don't appear related to the percentages you might plot them on the same chart but two different axes. If they were relate...

CRM Internal email lost
Hello I have a problem with emails generated within CRM 3, the emails are not delivered to any internal user's exchange mailbox but they are are beeing delivered outside our domain. Has anybody got a clue on why this is happening or how I can get the mails to be delivered to the Domain users? BR Claudio Any luck on this we are having the same problem. Thank you! "Claudio S" wrote: > Hello > I have a problem with emails generated within CRM 3, the emails are not > delivered to any internal user's exchange mailbox but they are are beeing > delivered outsid...

validation list or combo box dependant on cell value
Am i able to determine the values shown in either a validation list or combo box being dependant on a value in another cell? ie: Cell A1 = BOB then validation or combo box would then base it's list from the named range (or whatever the solution may be) based on Bob. if i was to change A1 to ROY then it would also change the underlying list? I have tried everything that i think SHOULD work but that it pretty limited... thanks in advance rich I'd start with Debra Dalgleish's site: http://contextures.com/xlDataVal02.html Richard Edwards wrote: > > Am i able to deter...

Contact list not recognized as an address book in outlook email
I installed Outlook 2007 on my computer and imported my addresses from my other computer's Outlook file with excel. The contact list shows all the addresses but I can not access the contact list when I try to send an email. The address book drop down menu does not show anything. I tried to do the "properties" on the contact file, selected the tab "Outlook Address Book" and I am not allowed to check the box to "Show this folder as an address book". I am hoping someone can help me get this resolved. Thank you in advance If you have Contacts in...

Move a particular named sheet to the end.
Using macros, how can I move a sheet called TOTAL to become the very last sheet within a workbook? Your assistance will be appreciated. -- Thank U and Regards Ann Try this: Worksheets("Total").Move after:=Worksheets(Worksheets.Count) "Ann" wrote: > Using macros, how can I move a sheet called TOTAL to become the very last > sheet within a workbook? > > Your assistance will be appreciated. > > -- > Thank U and Regards > > Ann > Barb, Works a treat, thank you for your assiatance. -- Thank U and Regards Ann "Barb Reinhar...

delayed email #3
I am running server 2k3 and exchange 2k3. When I send out an email message to everyone in our email group I get a message that a few of the people did not receive the message This is an automatically generated Delivery Status Notification THIS IS A WARNING MESSAGE ONLY. YOU DO NOT NEED TO RESENT YOUR MESSAGE Delivery to the following recipients has been delayed. And then it lists a few people that the email has been delayed to. Except the message never gets to these people Any help would be appreciated Mark, A bit more information, if you please. Can you define "eve...

File Naming for Picture Order
I want my photos within a folder to appear in a certain order and want them in numberical order; however, when I put them in numerical order and get past 9 (into 2 digit numbers) the order gets all whacky. bjackson wrote: > I want my photos within a folder to appear in a certain order and > want them in numberical order; however, when I put them in numerical > order and get past 9 (into 2 digit numbers) the order gets all whacky. ======================= Instead of... 1, 2, 3,.....10, 11, 12... Try this... 0001, 0002, 0003,.....0010, 0011, 0012 If you are batch renumbering the f...

retrieving disgruntled employees email
I currently have an employee who has some email that I need before he leaves. I am afraid when he leaves he will wipe his hard drive and information pertinent to our company will be lost. Is there any way I can get his mailbox store in a format where I can read through it? We have exchange server 2003... Thanks In news:1156938912.420497.277510@b28g2000cwb.googlegroups.com, jborgnini@tippmanngroup.com <jborgnini@tippmanngroup.com> typed: > I currently have an employee who has some email that I need before he > leaves. I am afraid when he leaves he will wipe his hard drive and...

Drop Down List #4
I am trying to insert a drop down list in one worksheet. I have a list of names on worksheet 2 that I would like to drop down. The directions from Help are hard to follow and there seem to be missing steps. HELP See Debra Dalgleish's website for good instructions: http://www.contextures.com/xlDataVal01.html Particularly, the "Name the List Range" section Does that help? *********** Regards, Ron XL2002, WinXP-Pro "Kerry Anne" wrote: > I am trying to insert a drop down list in one worksheet. I have a list of > names on worksheet 2 that I would like to dr...

Having different gap widths among bars
Hi, I tried to 2 different gap widths among yearly bars and monthly bars. No success. Any resolution or a better way to handle this kind of presentation? Advice is greatly appreciated. MW Do you want a bunch of years to the left, and a bunch of months to the right? Put your months on the secondary axis, and include lots of blanks in the beginning of the series data range, so the months pile up toward the right. Include blanks at the end of the yearly series data range to push those bars to the left. Right click the chart, choose Chart Options, and click on the Axes tab. Check th...

help with Excel Chart, Series name
Hello, I am using ORACLE OLE2 package to print a series bar graph in excel. I need to rename "Series Name" that comes out in as a char in excel. By defual the series are names as Series1, Series2, Series3,.....SeriesN. How can I access the handle to "Series Name" which help me change its name. Any help will be highly appreciated. Thanks you, Bilal Bilal, Manally, you do this with Chart - Source data - Series tab. There's a series name box. Select the series to be edited in the drop-down at the left first. It may have a cell reference currently in it, or you can...

need to edit blank email
I have started working with Outlook 2003, and am exceedingly annoyed that the messages I make are all spaced out at inordinately large intervals. A little bit of knowledge being dangerous, I have fixed Word and Excel to start exactly as I want them to, and would like to do the same with Outlook. When I am done composing a message, I Select All and |Format|Paragraph| and set Before and After to 0 and it collapses the message somewhat, but its annoying to have to keep doing it. Any advice would be gratefully appreciated. -- Regards, P D Sterling Florida, New York USA are you using wo...

Displaying Sheet Tabs Names in Cells
Can anyone tell me if there is a way for me to display the Name of a Sheet Tab in a cell. Take for example I have 4 worksheets, labelled Shawn, Kevin, Mary, & Data. In data, I want it to show the name of the worksheets. So in Cell A4 I would like it to say Shawn, then in B4 I can put Shawn's data in. Is there a function or a formula that allows me to do this. Thanks for any help. Hi Maybe this UDF will do for you. ------ Public Function TabI(TabIndex As Integer) As String Application.Volatile TabI = Sheets(TabIndex).Name End Function ------ Insert the function in...

multiple email domain hosting
Is it possible with Exchange 2003 to host multiple email domains in addition to the Active directory integrated domain of the entreprise. To make that server a mail server for other company in pop3 only. I know in Exchange 5.5 it was possible but i did not find anything for routing domains in Exchange 2003 Can exchange 2003 host multiple other email domain without them being in the active directory ? Thanks Yes it can be done, Just make sure you have the DNS MX records pointing to your server/s, then either create a new recipient policy, or modify the default recipient policy. So ...

email to Public folder gets NDR
When I try to send a message to PF I get a NDR and following message in Application log Event Type: Warnin Event Source: MSExchangeTranspor Event Category: Exchange Store Driver Event ID: 32 Date: 31.05.200 Time: 9:50:2 User: N/ Computer: XMAI Description The following call : EcLocallyDeliverMsg2 to the store failed. Error code : 1238 (Message-ID <C8F74733BF2C7E4888545664F83970FC47162D@xmail.1111.ru> will be NDR'd). MDB : 0a07ea5d-c42f-41d6-9b26-1b91ceddf4dd. FID : 1-41. MID : 1-23E6CB. File : . But some other users can send messages without problems.. What does this error code(...

how to transfer email from window xp to window 7
wOULD ANY ONE PLS LET ME KNOW THE STEPS OF HOW I COULD TRANSFER EMAIL MESSAGES FROM OUTLOOK EXPRESS TO WINDOW 7 VERSION You don't do it through Microsoft Word, the topic of this newsgroup. "Dummies for win7" <Dummies for win7@discussions.microsoft.com> wrote in message news:0DF468BF-FEE6-4BDD-8292-38000059C489@microsoft.com... : wOULD ANY ONE PLS LET ME KNOW THE STEPS OF HOW I COULD TRANSFER EMAIL : MESSAGES FROM OUTLOOK EXPRESS TO WINDOW 7 VERSION ...