Need help getting files from Exchange Server.
We have a computer that had an account on Outlook
attached to a Microsoft exchange server.
Apparently for the moment, this computer and the
server are inextricably tied together. Outlook cannot
even be started without logging into the server
because information store or whatever is missing.
How do you get the information out of the exchange
server to wean the computer from it?
tom <Spamblocker@ameritech.net> wrote:
> We have a computer that had an account on Outlook
> attached to a Microsoft exchange server.
> Apparently for the moment, this computer and the
> se...Downloading Old Emails
Outlook (2003) keeps downloading emails from my account that it has already
downloaded. I have changed any settings and I've checked the settings I do
have and I can't figure out why it does this. I have it set to retain emails
on the server for 7 days. But it keeps downloading the same emails over and
over again. At one point, it was close to 150 emails. I went on to the
server and deleted them. But it's still doing it for the new emails I
received after that. It just started doing this a couple weeks ago. It did
it once and then behaved normally until a cou...How to get TASK_ID field for summary tasks without using Project.a
I know for tasks which are not summary tasks we can get TASK_ID field using
statusing web service. But i could nto find any other options than Project
web service to get TASK_ID field for summary tasks and the top level project
Problem of using Project web service is that in my custom sharedpoint web
part where we are using PSI web services we get all the data required using
Resource and Statusing web service for the logged in resource. But Statusing
web service retrieves TASK_ID only for actual tasks and not for summary
Now just to get TASK_ID of summary tas...setting up multiple email accounts #2
I followed the rules for setting up the pop3 and smtp
accounts for multiple mail accounts, but when I access
outlook express the additiona account does not recognize
the password I've asked it to remember. HELP!
KCB <email@example.com> wrote:
> I followed the rules for setting up the pop3 and smtp
> accounts for multiple mail accounts, but when I access
> outlook express the additiona account does not recognize
> the password I've asked it to remember. HELP!
Ask in an Outlook Express newsgroup.
...Can't get the proper display of a field in my report.
I have 2 tables, both using autonumbers for their primary key. The first
table is for contacts (i.e. last name, first name, etc.). The second table
is for businesses (business name, etc.) I have a field in my contacts table
that has a number format so it can be used as a foreign key for the business
table. I then set up the relationship between them & enforced referential
integrity. When I run a query, I see the name of the business (after setting
up a combo box) - no problem. When I run a report based on that query, a
number is displayed (not the business name).
Suggestions, pleas...Exchange Services group
While in OWA, I was able to look at my mail thru the net. I then typed in
another users login and was able to get into their email without being
prompted for a password. At first I thought we had a major security problem.
I then asked some other people in my department if they could do the same
but they were prompted for passwords. In researching this, I found that
myself and two other people were a part of the Exchange Services group. When
I took one person out of this group, they were not able to get into other
peoples email thru webmail. My mgr is in a frenzy now. She doesn...Format Issue of Windows Mail and M.S. Group
When clicking to open any mails including this site, MS Newsgroup, top
right pane of 'X' part is not visible.
In the past, I used 'Shove-It' program that was found on the web-site,
priced $15 that corrected this issue. However, this program is no longer
effective, thus it went back to the original format, .... not fully opening
content of mail of right side of pane, although I can read any mails by
using 'maximizing bvutton' to open in full.
Any imputs on this, above would be greatly appreciated.
"Winter10" <Winter10No...Unattend configure Send/Receive Group / PRF file -Outlook XP
Have to rollout 4000 laptops with Offline Storage enabled. I want to
automatically configure outlook to:
- use OST file
- Synchronize when logging on and off
- Download and sync. the general address book
I have made a PRF file (using CIW) that creates OST file...so far so good...
But I can't unattend set the option to sync when logging on and off. It
seems this setting is stored in an SRS file in the users profile!!
Second item, default the first address book in the list is synchronised.
Is there a way to auto configure Outlook XP to sync OST fiel when logging on
and off, (ins...To many Recipients
I received a message with multiple "to many recipients".
I checked my ISP and found out that they are limiting
the number of recipients per message. They do this to
Now, I have to split serveral distribution lists to work
�How can I move 110/220 contacts from one distribution
list to a new one, so both of them have the same number
I use Microsoft Outlook 2003
Katty <firstname.lastname@example.org> wrote:
> I received a message with multiple "to many recipients".
> I checked my ISP and found out that they are limiting
...Word Attachments showing up unreadable in for recipient
We send a newsletter by email to multiple recipients and
some people are unable to read the attachment. The
attachment shows up as mixed symbols and letters instead
of the document. This only happens with certain end
users. Most recipients can read it fine. We have tried
sending Plain text and Rich text with the same result.
Have any ideas why this is happening?
...CRM Internal email lost
I have a problem with emails generated within CRM 3, the emails are not
delivered to any internal user's exchange mailbox but they are are beeing
delivered outside our domain. Has anybody got a clue on why this is happening
or how I can get the mails to be delivered to the Domain users?
Any luck on this we are having the same problem.
"Claudio S" wrote:
> I have a problem with emails generated within CRM 3, the emails are not
> delivered to any internal user's exchange mailbox but they are are beeing
> delivered outsid...Routing group
I have 2 exchange 2003 servers in 2 different locations.
Exchange-A and Exchange-B
Exchange-A in Site A that has internet connection
Exchange-B in Site B that has internet connection as well.
Both Site A and Site B are connected via VPN permenantely. In addition,
both networks are in same forest/domain, but different subnet. Both exchange
servers are in same organization as well.
I'd like to have both of these exchange connected together,
however I want users in Exchange-B send/recieve their external emails
to/from smtp virtual server in Exchange-A in Site-A.
Do I need to create a new ...Contact list not recognized as an address book in outlook email
I installed Outlook 2007 on my computer and imported my addresses from my
other computer's Outlook file with excel. The contact list shows all the
addresses but I can not access the contact list when I try to send an email.
The address book drop down menu does not show anything. I tried to do the
"properties" on the contact file, selected the tab "Outlook Address Book" and
I am not allowed to check the box to "Show this folder as an address book".
I am hoping someone can help me get this resolved. Thank you in advance
If you have Contacts in...Recovery Storage Group issue
We are running an Exchange 2003 cluster in our production environment. I've
brought up another non-clustered Exchange 2003 server in the same
organization to be used only for recovering mailboxes. This server has a
Recovery Storage Group. We use ntbackup for backing up the cluster. When I
try to restore a backup of production server to our recovery server using
ntbackup restore (Alternate Location) , I receive "The specified computer is
not a Microsoft Exchange server or its Microsoft Exchange services are not
started.". All Exchange servers are part of the same Admin...delayed email #3
I am running server 2k3 and exchange 2k3. When I send out an email message
to everyone in our email group I get a message that a few of the people did
not receive the message
This is an automatically generated Delivery Status Notification
THIS IS A WARNING MESSAGE ONLY.
YOU DO NOT NEED TO RESENT YOUR MESSAGE
Delivery to the following recipients has been delayed.
And then it lists a few people that the email has been delayed to. Except
the message never gets to these people
Any help would be appreciated
A bit more information, if you please. Can you define "eve...retrieving disgruntled employees email
I currently have an employee who has some email that I need before he
leaves. I am afraid when he leaves he will wipe his hard drive and
information pertinent to our company will be lost. Is there any way I
can get his mailbox store in a format where I can read through it? We
have exchange server 2003...
email@example.com <firstname.lastname@example.org> typed:
> I currently have an employee who has some email that I need before he
> leaves. I am afraid when he leaves he will wipe his hard drive and...How to get the handle of a Help file belonging to other process.
In my application,I want to change the Index of a HTMLHELP
file which belongs to a dialog running in other exe.In order to do this
I need to find whether the Help file is open or not & get the handle of
that to use HH_DISPLAY_INDEX .Is there any way to do this??
Note: I dont want to use FindWindow() as it is giving rise to some
problems in my application..
Thanks in advance
...need to edit blank email
I have started working with Outlook 2003, and am exceedingly annoyed
that the messages I make are all spaced out at inordinately large intervals.
A little bit of knowledge being dangerous, I have fixed Word and Excel
to start exactly as I want them to, and would like to do the same with
When I am done composing a message, I Select All and |Format|Paragraph|
and set Before and After to 0 and it collapses the message somewhat, but
its annoying to have to keep doing it.
Any advice would be gratefully appreciated.
P D Sterling
Florida, New York USA
are you using wo...supplier info gets deleted
I have run a report for items in a category in order to organize them into
the proper categories & departments
I double click the item look up - properties opens - I change the deparment
&/or category - OK
When I look at these items again - the supplier information is gone - I have
to reopen each one and re-enter the supplier!
Can anyone tell me why & how to avoid this happening?
ALSO in my category report I am finding some suppliers blank - but when I
open the properties the supplier is there - I have to delete the supplier &
re-add the supplier. Anyone know why &am...Recipient Address Popup
Operating System: Mac OS X 10.6 (Snow Leopard)
Email Client: imap
How can I disable the popup for entering to, bc, bcc fields? I would rather just have the fields there in the new email window without any popup.
...multiple email domain hosting
Is it possible with Exchange 2003 to host multiple email domains in addition
to the Active directory integrated domain of the entreprise.
To make that server a mail server for other company in pop3 only.
I know in Exchange 5.5 it was possible but i did not find anything for
routing domains in Exchange 2003
Can exchange 2003 host multiple other email domain without them being in the
active directory ?
Yes it can be done,
Just make sure you have the DNS MX records pointing to your server/s, then
either create a new recipient policy, or modify the default recipient
policy. So ...email to Public folder gets NDR
When I try to send a message to PF I get a NDR and following message in Application log
Event Type: Warnin
Event Source: MSExchangeTranspor
Event Category: Exchange Store Driver
Event ID: 32
The following call : EcLocallyDeliverMsg2 to the store failed. Error code : 1238 (Message-ID <C8F74733BF2C7E4888545664F83970FC47162D@xmail.1111.ru> will be NDR'd). MDB : 0a07ea5d-c42f-41d6-9b26-1b91ceddf4dd. FID : 1-41. MID : 1-23E6CB. File : .
But some other users can send messages without problems..
What does this error code(...Outgoing messages occasionally don't get sent
I'm having a very strange problem with Outlook 2007. 99% of the time
everything worked fine but once in awhile outgoing messages do not get
sent and remain in the outbox. The only way I can get them to be sent
is too close Outlook and then restart it at which time the messages
When I close outlook I get the message that says I have mail in my
outbox, do I want to close anyway or not close so Outlook knows there
is mail there. I've tried pressing F9 and even then the mail doesn't
I'm running this on a laptop using Microsoft Vista Home Premium and my
mail...how to transfer email from window xp to window 7
wOULD ANY ONE PLS LET ME KNOW THE STEPS OF HOW I COULD TRANSFER EMAIL
MESSAGES FROM OUTLOOK EXPRESS TO WINDOW 7 VERSION
You don't do it through Microsoft Word, the topic of this newsgroup.
"Dummies for win7" <Dummies for email@example.com> wrote in
: wOULD ANY ONE PLS LET ME KNOW THE STEPS OF HOW I COULD TRANSFER EMAIL
: MESSAGES FROM OUTLOOK EXPRESS TO WINDOW 7 VERSION
...Which type of digital certificate to get from VeriSign for SignedXML
Happy New Year.
I am using SignedXML and an X509 certificate to digitally sign a SOAP
message body and put the signature in the SOAP header for a B2B business
application. Can you suggest which type of digital certificates from
VeriSign is for this purpose? I checked VeriSign's web site but didn't find
it obvious to decide.
Thank you very much for your help.
What about the Secure Site Services? SSL certificates are ideal for
securing Web sites, intranets and extranets. It's cheap and guarantee every
SSL session will receive powerful SSL enc...