Reply:

Where do the messages go?
I am going to do a offline defrag of our Exchange 5.5 (SP4 on W2k server)database and I had the question of where do the messages go when the services have stopped? I have done a couple of offline defrags and I have never had the question and I don't think we have lost any messages. Where are the messages held? Does the email bounce back to the sender? Any help would be greatly appreciated. Thanks, John "JohnH" <houserj2000@hotmail.com> wrote... > I am going to do a offline defrag of our Exchange 5.5 > (SP4 on W2k server)database and I had the question of &...

Password Issue with MS Money 2003
Hello, I am not familiar with newsgroups but I hope it is a forum to seek assistance. I am unable to reach MS support via email from my home computer on this issue. My Money 2003 requires a net passport password to open my account in Money that I have successfully accessed for approximately 12 months. It does not recognize my password now. I have attempted several times with my existing password, changed my net passport password, even uninstalled and re- installed MS Money 2003 to gain access to my account. Nothing has worked. Each time it states I have failed to enter the corr...

Outlook 2003 keeps crashing #2
I get this message when I look in System information. Outlook keeps crashing quite often. I cannot for example delete two messages without outlook crashing. My colleagues do not have this problem. We are using the Microsoft mail exhange server. Faulting application outlook.exe, version 11.0.5510.0, stamp 3f1380f0, faulting module mso.dll, version 11.0.5606.0, stamp 3f334cce, debug? 0, fault address 0x003b6e16. Does anyone has a solution?=20 Best regards/ Bj=F6rn 1) I would definitely apply Service Pack 2for Office 2003 + applicable critical security updates. 2) Have you tried starting O...

Exchange 2003 new install can not receive external email.
I have just setup a new Windows Server 2003 standard edition with Exchange 2003 standard edition on it. I have been working for a while trying to get it to receive external email. I can send out and send/ receive internal messages, but when someone trys to send me a message from outside our network they get the following returned mail message This Message was undeliverable due to the following reason: Each of the following recipients was rejected by a remote mail server. The reasons given by the server are included to help you determine why each recipient was rejected. Recipient: <**...

Runtime Error when closing OUTLOOK 2k
What's this mean and how to fix? in error dialogue box: "c:\program~1\micro~2 \office\outlook.exe" Abnormal program termination ...

Outlook needs Outlook Express to work
I've installed my Outlook 2002 on my new Vista PC (I had Xp before). Now when I start Outlook it says "requires Outlook Express 4.01 or greater". I've been looking for Outlook Express to download and install but no joy. No CD came with my new Vista PC. Any ideas, short of buying a more modern Outlook? Vista doesn't actually support Outlook 2002 or older. Outlook Express is part of Internet Explorer but with the advent of Vista, it was switched to Windows Mail. There is no more Outlook Express. You could attempt however to create a profile using workgroup or c...

"The connection to the Exchange server is unavailable. Outlook must be online or connected to complete this action"
I have setup a number of user accounts and the relative mailboxes without any problem. However, since this afternoon, if I try and connect to a newly mailbox through the email accounts wizard I get the following error message: "The connection to the Exchange server is unavailable. Outlook must be online or connected to complete this action". This also occurs when I go to File>Open>Other User's Folder... and I try and lookup an existing account/mailbox that I know I have permission to. I know Outlook is connected to the Exchange server (I can ping, send and receive emails) ...

Crash on 'Send"
My wife's Intel Celeron running ME started having this problem sporadically - now constantly. Outlook 2000 receives OK - everything seems fine until you hit the 'Send' button then Outlook crashes giving an error message that says 'Outlook has caused an error in <unknown> and has to shut down. If the problem persists you may have to restart your computer.' Re-starting however has no effect. I have re-installed Office. Used 'Detect & Repair' under the 'Help' tab, and installed all patches/updates from the Office site. But this error continues, now...

Transferring over outlook data to new XP machine
How do I transfer over my old emails, address book to my new XP machine? I have looked over the internet and found nothing the tells me EXACTLY how to do this, any help would be greatly appreciated. senior_tech@yahoo.com If your using MS Outlook copy your .PST file across and import it into the new install. >If your using MS Outlook copy your .PST file across and import it into the new install. No, don't import it. Simply use "File">"Open" -- Brian Tillman Smiths Aerospace 3290 Patterson Ave. SE, MS 1B3 Grand Rapids, MI 49512-1991 Brian.Tillman is the nam...

Outlook 2003 and "Check Names"
Hi, We are testing Outlook 2003 at our office now and there is one very frustrating "feature" that is bugging all of us. When we create a new e-mail message and type in the first name of a person from the global address book and hit ctrl- k to check the name...we get a response that Outlook doesn't recognize the name and there are "no suggestions". The only way Check Name will successfully resolve the name is if we type it last name first (ie, Gates, Bill). This was not the case in Office XP or Outlook 2000. You could search by first name (or partial first name)...

Reminders in Outlook
Since upgrading to Great Plains 9.0, several users are not getting their appointment reminders in Outlook 2003. They all show up at once after rebooting computer. Outlook settings are set appropriately. Any ideas? -- Steve ...

Outlook default to paragraph
To whom ever can help, > > When using Microsoft Outlook, and starting a new E- Mail, The default > format is to "paragraph" which double spaces. Is there anyway to > select under a New Message, Format, Style, "Normal" as the default? > > Thank you in advance > > Dave daveandivy@netidea.com >-----Original Message----- >To whom ever can help, >> >> When using Microsoft Outlook, and starting a new E- >Mail, The default >> format is to "paragraph" which double spaces. Is there >anyway to >> select unde...

Install Exchange 2003 Server on new Hardware with same name
I got a new server to move my Exchange Server Installation. I want to keep the name I'm using now for my Server. Already read TechNet Article "How to Move Exchange Server 2003 to New Hardware and Keep the Same Server Name". Is there anything else that I should be aware of that is not on this TechNet article? I'm using a different Disk Configuration, does this matters? Should this be a smooth process? Thanks for any help you can give. The drive letters MUST match, because the paths of the databases are at the Active Directory. The disks can have different sizes than the or...

Displaying property menu at runtime
Hello, Is there a way to display at runtime the property menu of a control so that the user may interact with the control? In my case, I'm speaking about the MsChart control which has a property menu at the design phase (when picking "properties" after right clicking on the control) Thanks Avi "avi" <aviben@bezeqint.net.il> wrote in message news:e2fc8178-471a-48b1-9671-fc81ca23c912@l14g2000yql.googlegroups.com... > Is there a way to display at runtime the property menu of a control so > that the user may interact with the control? > ...

owa not resolving names properly
Exchange 5.5 sp4 - just recently OWA is not resolving addresses properly - the administrator at this site states: > There is a strange situation happening when using OWA to send emails. If > we try to send an email to an account out of our domain (i.e. > jravazzano@yahoo.com) the recipient name and domain get wrongly resolved > to our own domain thus generating a message undeliverable. > > For example using OWA a test email was sent to "jravazzano@yahoo.com" the > address gets resolved to j@ourdomain.com The admin is going to give me an account to test with, but...

Addressing within Exchange 2003
We are running Exchange 2003 SP2. We setup an MX record for a external email(alumni.cup.edu) these mailboxes do not exist within our exchange org. But when we send email to these externals email mailboxes we are getting the following NDRs: #5.5.0 smtp;550 Mailbox unavailable. #5.4.0 Is there a way in exchange to ignore these email address so that we don't get the NDR from within our Exchange Org? On Fri, 4 Aug 2006 08:08:02 -0700, Sabo, Eric <sabo_e@cup.edu> wrote: >We are running Exchange 2003 SP2. We setup an MX record for a external >email(alumni.cup.edu...

how do i add "Software Digrams" Folder in my Visio 2003
how do i add software diags folder in visio 2003 version. Like if i go to File->New it shows folders like brainstorming, project schedule, block diagrams but in my case its missing the Software Diags folder which contains activity diags, web mock ups, use case diags etc. please let me know how to get that template. thanks. Ankur What edition of Visio are you using? Check by going to the About Microsoft Office Visio dialog from the Help menu. "Ankur" <Ankur@discussions.microsoft.com> wrote in message news:F0D10BF0-A059-4A9C-B615-B99F3916F4E5@microsoft.com... > how...

Outlook "Ruler" won't go away
I don't know how I turned this on so I don't know how to turn it off. It splits my emails so that I can only type so far over before it kicks me back to the left margin and makes me start a new line. Can anyone help me? ...

Outlook 2003
Hello, we have one client pc with Outlook 2003 where the following problem occurs: if a mail is replied from a user created sub folder of the inbox, the reply will not appear in sent mails, but will end up in the same sub folder, sender and recipient appear as identical. The mail goes out properly though, it's just that Outlook sets internally sender = recipient and bounces the reply back to the subfolder in which the original mail is stored. This happens on a Win 2000 machine with SP4 and all updates, the other clients use Outlook 2000 or XP and there is no such problem. There are no ru...

[Exchange 2003] Mail enabled public folder and sender address
I have a Windows 2003 domain with a native mode Exchange 2003 organization; there are some mail enabled public folders. When a user replies to a message in a public folder, the outgoing mail's sender address is the user's one; I want it to be the public folder's one, or at least I'd like the "reply-to" address to be set to the public folder's. How can I accomplish this? Thanks Massimo You would need to grant the user permissions to be able to Send As the public folder. By default, when you reply to a message that is in a PF, the PF is not composing the ...

Unexpected error message on closing an Excel file
Suddenly I am getting the following message when I try to close a workbook: "Your formula contains an invalid external reference to a worksheet. Verify that the path, workbook, and range name or cell reference are correct, and try again" The mysterious thing is that it does not happen consistently and that, after I click OK after the above message, I can still save the file. What might be the cause of this error message and can the "invalid reference" be tracked down using one of the utility add-ins such as J. Walkenbach's PUP? If it only happens when you close ...

displaying colors in an mfc application
Hi everyone, I'm working on an MFC application. The application is a treeview in which are represented some objects (persons, roles....). I have declared some bitmaps in the visual project to represent these objects. My problem is that some colors of the bitmaps are not displayed. I guess there is a palette problem or something like that. Does anybody have an idea of what the problem is? Thanks a lot for your help.... Fred Try using ILC_COLOR24 | ILC_MASK when you create your imagelist. -- Ajay Kalra [MVP - VC++] ajaykalra@yahoo.com "fred" <fred@laposte.net> wrot...

Message comes as an attachment
I'm using Exchange 2003 and Outlook. Some clients receive my messages as a blank email with an attachment that contains the message. For most clients the messages look fine but there are a few that always do this. I'm guessing that it is an incompatible setting between our mail servers. Any idea what I should look for? A couple things I forgot to mention - the clients are using Exchange 5.5 and 2000, and this apparently only happens when there is an attachment in the original email. If we send them a message with just text and no attachment it shows up fine, but if we s...

Import from Eudora 6 to Outlook 2003
I am trying to import messages from Eudora 6 to Outlook 2003. I am receiving the error message "The mail folder could not be opened. If another application is using this file, please close and try again. No other applications are running Thanks for any help see article 257354 of the microsoft knowledge base on http://support.microsoft.com: "Outlook Cannot Import Eudora Messages When Eudora Mail Is Stored in a Non-Default Location" ciaos >-----Original Message----- >I am trying to import messages from Eudora 6 to Outlook 2003. I am receiving the error message ...

Outlook OOF
The Out of Office Reply will not be sent outside the network. I have exchange 5.5 and have read the faqs but the only fix I found did not work. Here is the number for the fix that I found: Q176161. Thank you for your time and help, Larry 1. Make sure your Exchange server's Internet Mail Service is configured to allow Automatic Replies to the Internet; that's the most common reason it wouldn't work. 2. Reconsider if you really want to use it. You're going to automatically reply to every message you receive; including spam. That's a good way to confirm to the spammer...