Outlook 2003 Cannot Send Mail via POP/SMTP

I have a number of remote users who POP's mail into and out of our
Exchange 2000 box. One is unable to send mail to anyone (either within
the organisation or to external addresses), so I have temporarily
discounted relaying as an issue, although I have checked the settings
on the virtual server and they are all correct (allowing authenticated
users to relay mail etc.) Receiving seems OK.

The user has Outlook 2003 (fresh install) on Windows XP (fresh
install).

Log file:

2004.07.29 15:29:39 <<<< Logging Started (level is LTF_TRACE) >>>>
2004.07.29 15:29:39 server.domain.com: Synch operation started (flags
= 00000001)
2004.07.29 15:29:39 server.domain.com: UploadItems: 1 messages to send
2004.07.29 15:29:39 SMTP (server.domain.com): Begin execution
2004.07.29 15:29:39 server.domain.com: Synch operation started (flags
= 00000030)
2004.07.29 15:29:39 server.domain.com: DoPOPDownload(flags = 00000030,
max msg = ffffffff): full items
2004.07.29 15:29:39 POP3 (server.domain.com): Begin execution
2004.07.29 15:29:39 SMTP (server.domain.com): Port: 25, Secure: no,
SPA: no
2004.07.29 15:29:39 SMTP (server.domain.com): Finding host
2004.07.29 15:29:39 SMTP (server.domain.com): Connecting to host
2004.07.29 15:29:39 POP3 (server.domain.com): =========  Initial blob 
 =========
2004.07.29 15:29:39 POP3 (server.domain.com):
===================================
2004.07.29 15:29:39 POP3 (server.domain.com): Port: 110, Secure: no,
SPA: no
2004.07.29 15:29:39 POP3 (server.domain.com): Finding host
2004.07.29 15:29:39 POP3 (server.domain.com): Connected to host
2004.07.29 15:29:39 SMTP (server.domain.com): Connected to host
2004.07.29 15:29:40 POP3 (server.domain.com): <rx> +OK Microsoft
Exchange 2000 POP3 server version 6.0.5762.3 (FQDN server.domain.com)
ready.
2004.07.29 15:29:40 POP3 (server.domain.com): Authorizing to server
2004.07.29 15:29:40 POP3 (server.domain.com): [tx] USER domain/user
2004.07.29 15:29:40 server.domain.com: Synch operation queued
2004.07.29 15:29:40 server.domain.com: Synch operation queued
2004.07.29 15:29:40 POP3 (server.domain.com): <rx> +OK
2004.07.29 15:29:40 POP3 (server.domain.com): [tx] PASS *****
2004.07.29 15:29:41 POP3 (server.domain.com): <rx> +OK User
successfully logged on.
2004.07.29 15:29:41 POP3 (server.domain.com): Authorized to host
2004.07.29 15:29:41 POP3 (server.domain.com): Connected to host
2004.07.29 15:29:41 POP3 (server.domain.com): [tx] STAT
2004.07.29 15:29:41 POP3 (server.domain.com): <rx> +OK 0 0
2004.07.29 15:29:41 POP3 (server.domain.com): ==== Comparing server
and local blobs ====
2004.07.29 15:29:41 POP3 (server.domain.com):
==========================================
2004.07.29 15:29:42 POP3 (server.domain.com): Do deletions: LoS: no
2004.07.29 15:29:42 POP3 (server.domain.com): Disconnecting from host
2004.07.29 15:29:42 POP3 (server.domain.com): [tx] QUIT
2004.07.29 15:29:42 POP3 (server.domain.com): <rx> +OK Microsoft
Exchange 2000 POP3 server version 6.0.5762.3 signing off.
2004.07.29 15:29:42 POP3 (server.domain.com): Disconnected from host
2004.07.29 15:29:42 POP3 (server.domain.com): ========= No blob
changes =========
2004.07.29 15:29:42 POP3 (server.domain.com):
===================================
2004.07.29 15:29:42 POP3 (server.domain.com): End execution
2004.07.29 15:29:42 server.domain.com: ReportStatus: RSF_COMPLETED, hr
= 0x00000000
2004.07.29 15:29:42 server.domain.com: Synch operation completed
2004.07.29 15:29:42 server.domain.com: Synch operation dequeued (flags
= 00000030)
2004.07.29 15:29:42 server.domain.com: Synch operation started (flags
= 00000030)
2004.07.29 15:29:42 server.domain.com: DoPOPDownload(flags = 00000030,
max msg = ffffffff): full items
2004.07.29 15:29:42 POP3 (server.domain.com): Begin execution
2004.07.29 15:29:42 POP3 (server.domain.com): =========  Initial blob 
 =========
2004.07.29 15:29:42 POP3 (server.domain.com):
===================================
2004.07.29 15:29:42 POP3 (server.domain.com): Port: 110, Secure: no,
SPA: no
2004.07.29 15:29:42 POP3 (server.domain.com): Finding host
2004.07.29 15:29:42 POP3 (server.domain.com): Connected to host
2004.07.29 15:29:43 POP3 (server.domain.com): <rx> +OK Microsoft
Exchange 2000 POP3 server version 6.0.5762.3 (FQDN server.domain.com)
ready.
2004.07.29 15:29:43 POP3 (server.domain.com): Authorizing to server
2004.07.29 15:29:43 POP3 (server.domain.com): [tx] USER domain/user
2004.07.29 15:29:43 POP3 (server.domain.com): <rx> +OK
2004.07.29 15:29:43 POP3 (server.domain.com): [tx] PASS *****
2004.07.29 15:29:43 POP3 (server.domain.com): <rx> +OK User
successfully logged on.
2004.07.29 15:29:43 POP3 (server.domain.com): Authorized to host
2004.07.29 15:29:43 POP3 (server.domain.com): Connected to host
2004.07.29 15:29:43 POP3 (server.domain.com): [tx] STAT
2004.07.29 15:29:44 POP3 (server.domain.com): <rx> +OK 0 0
2004.07.29 15:29:44 POP3 (server.domain.com): ==== Comparing server
and local blobs ====
2004.07.29 15:29:44 POP3 (server.domain.com):
==========================================
2004.07.29 15:29:44 POP3 (server.domain.com): Do deletions: LoS: no
2004.07.29 15:29:44 POP3 (server.domain.com): Disconnecting from host
2004.07.29 15:29:44 POP3 (server.domain.com): [tx] QUIT
2004.07.29 15:29:44 POP3 (server.domain.com): <rx> +OK Microsoft
Exchange 2000 POP3 server version 6.0.5762.3 signing off.
2004.07.29 15:29:44 POP3 (server.domain.com): Disconnected from host
2004.07.29 15:29:44 POP3 (server.domain.com): ========= No blob
changes =========
2004.07.29 15:29:44 POP3 (server.domain.com):
===================================
2004.07.29 15:29:44 POP3 (server.domain.com): End execution
2004.07.29 15:29:44 server.domain.com: ReportStatus: RSF_COMPLETED, hr
= 0x00000000
2004.07.29 15:29:44 server.domain.com: Synch operation completed
2004.07.29 15:30:00 SMTP (server.domain.com): Disconnected from host
2004.07.29 15:30:00 SMTP (server.domain.com): End execution
2004.07.29 15:30:00 server.domain.com: ReportStatus: RSF_COMPLETED, hr
= 0x800ccc0f
2004.07.29 15:30:00 server.domain.com: Synch operation completed
2004.07.29 15:30:00 server.domain.com: Synch operation dequeued (flags
= 00000001)
2004.07.29 15:30:00 server.domain.com: Synch operation started (flags
= 00000001)
2004.07.29 15:30:00 server.domain.com: UploadItems: 1 messages to send
2004.07.29 15:30:00 SMTP (server.domain.com): Begin execution
2004.07.29 15:30:00 SMTP (server.domain.com): Port: 25, Secure: no,
SPA: no
2004.07.29 15:30:00 SMTP (server.domain.com): Finding host
2004.07.29 15:30:00 SMTP (server.domain.com): Connected to host
2004.07.29 15:30:21 SMTP (server.domain.com): Disconnected from host
2004.07.29 15:30:21 SMTP (server.domain.com): End execution
2004.07.29 15:30:22 server.domain.com: ReportStatus: RSF_COMPLETED, hr
= 0x800ccc0f
2004.07.29 15:30:22 server.domain.com: Synch operation completed
2004.07.29 15:30:45 server.domain.com: Synch operation started (flags
= 00000001)
2004.07.29 15:30:45 server.domain.com: UploadItems: 1 messages to send
2004.07.29 15:30:45 SMTP (server.domain.com): Begin execution
2004.07.29 15:30:45 SMTP (server.domain.com): Port: 25, Secure: no,
SPA: no
2004.07.29 15:30:45 SMTP (server.domain.com): Finding host
2004.07.29 15:30:45 SMTP (server.domain.com): Connected to host
2004.07.29 15:31:06 SMTP (server.domain.com): Disconnected from host
2004.07.29 15:31:06 SMTP (server.domain.com): End execution
2004.07.29 15:31:06 server.domain.com: ReportStatus: RSF_COMPLETED, hr
= 0x800ccc0f
2004.07.29 15:31:06 server.domain.com: Synch operation completed
2004.07.29 15:31:55 server.domain.com: Synch operation started (flags
= 00000001)
2004.07.29 15:31:55 server.domain.com: UploadItems: 1 messages to send
2004.07.29 15:31:55 SMTP (server.domain.com): Begin execution
2004.07.29 15:31:55 SMTP (server.domain.com): Port: 25, Secure: no,
SPA: no
2004.07.29 15:31:55 SMTP (server.domain.com): Finding host
2004.07.29 15:31:55 SMTP (server.domain.com): Connected to host
2004.07.29 15:32:16 SMTP (server.domain.com): Disconnected from host
2004.07.29 15:32:16 SMTP (server.domain.com): End execution
2004.07.29 15:32:16 server.domain.com: ReportStatus: RSF_COMPLETED, hr
= 0x800ccc0f
2004.07.29 15:32:16 server.domain.com: Synch operation completed

************************************** END
*********************************

The user has a number of emails in his outbox queued for delivery.

Any ideas?
0
7/29/2004 2:21:48 PM
outlook 87535 articles. 11 followers. Follow

0 Replies
238 Views

Similar Articles

[PageSpeed] 15

Reply:

Similar Artilces:

Runtime Error when closing OUTLOOK 2k
What's this mean and how to fix? in error dialogue box: "c:\program~1\micro~2 \office\outlook.exe" Abnormal program termination ...

Outlook needs Outlook Express to work
I've installed my Outlook 2002 on my new Vista PC (I had Xp before). Now when I start Outlook it says "requires Outlook Express 4.01 or greater". I've been looking for Outlook Express to download and install but no joy. No CD came with my new Vista PC. Any ideas, short of buying a more modern Outlook? Vista doesn't actually support Outlook 2002 or older. Outlook Express is part of Internet Explorer but with the advent of Vista, it was switched to Windows Mail. There is no more Outlook Express. You could attempt however to create a profile using workgroup or c...

Recieve Mail Before Sending
How do I set up Outlook 2003 to recieve mail before sending Set your send/receive group settings to receive and not send. Or are you talking about setting authentication? --� Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion intact. After searching google.groups.com and finding no answer: Keith <anonymous@discussions.microsoft.com> asked: | How do I set up Outlook 2003 to recieve mail before sending ...

"The connection to the Exchange server is unavailable. Outlook must be online or connected to complete this action"
I have setup a number of user accounts and the relative mailboxes without any problem. However, since this afternoon, if I try and connect to a newly mailbox through the email accounts wizard I get the following error message: "The connection to the Exchange server is unavailable. Outlook must be online or connected to complete this action". This also occurs when I go to File>Open>Other User's Folder... and I try and lookup an existing account/mailbox that I know I have permission to. I know Outlook is connected to the Exchange server (I can ping, send and receive emails) ...

SMTP Event Sink not firing
Hi All, We have written an SMTP Event Sink to record all email into a database. This works fine for incoming emails but never seems to get triggered for outgoing emails. Is there some reason specific to SBS2003 which prevents this Event Sink from firing? Thanks, Nick Further research into this problem suggests I might need to setup an SMTP Bridgehead server and/or an SMTP connector for this. Can anyone give me some clues how to do this in SBS? Thanks, Nick "Nick" <NoOne@NotHere.com> wrote in message news:%23WkuwSW4KHA.4952@TK2MSFTNGP02.phx...

Password Issue with MS Money 2003
Hello, I am not familiar with newsgroups but I hope it is a forum to seek assistance. I am unable to reach MS support via email from my home computer on this issue. My Money 2003 requires a net passport password to open my account in Money that I have successfully accessed for approximately 12 months. It does not recognize my password now. I have attempted several times with my existing password, changed my net passport password, even uninstalled and re- installed MS Money 2003 to gain access to my account. Nothing has worked. Each time it states I have failed to enter the corr...

Outlook 2003 keeps crashing #2
I get this message when I look in System information. Outlook keeps crashing quite often. I cannot for example delete two messages without outlook crashing. My colleagues do not have this problem. We are using the Microsoft mail exhange server. Faulting application outlook.exe, version 11.0.5510.0, stamp 3f1380f0, faulting module mso.dll, version 11.0.5606.0, stamp 3f334cce, debug? 0, fault address 0x003b6e16. Does anyone has a solution?=20 Best regards/ Bj=F6rn 1) I would definitely apply Service Pack 2for Office 2003 + applicable critical security updates. 2) Have you tried starting O...

Exchange 2003 new install can not receive external email.
I have just setup a new Windows Server 2003 standard edition with Exchange 2003 standard edition on it. I have been working for a while trying to get it to receive external email. I can send out and send/ receive internal messages, but when someone trys to send me a message from outside our network they get the following returned mail message This Message was undeliverable due to the following reason: Each of the following recipients was rejected by a remote mail server. The reasons given by the server are included to help you determine why each recipient was rejected. Recipient: <**...

Outlook 2003 and "Check Names"
Hi, We are testing Outlook 2003 at our office now and there is one very frustrating "feature" that is bugging all of us. When we create a new e-mail message and type in the first name of a person from the global address book and hit ctrl- k to check the name...we get a response that Outlook doesn't recognize the name and there are "no suggestions". The only way Check Name will successfully resolve the name is if we type it last name first (ie, Gates, Bill). This was not the case in Office XP or Outlook 2000. You could search by first name (or partial first name)...

Auto start (and Stop) downloading from POP accounts.
Sir, My ISP rpovide me a free time to use internet conection between 2.00 amto 8.00 am. My ISP charges me on the maount of data send / receive by me on MB basis. So, is any way that the MS profesionsl edition 2003 (outlook) starts on 2.01 am, starts downloding / sending the mails from POP accounts. and stop at 7.59 am. Is any trick available , please let me and other esteem members of this group know. thanks in advance. Schedule a task (in Win), ie to start OL (I assume you will have configured OL for polling) Then schedule a shutdown/close of OL "Prince" <r.r.makwana@gmai...

Transferring over outlook data to new XP machine
How do I transfer over my old emails, address book to my new XP machine? I have looked over the internet and found nothing the tells me EXACTLY how to do this, any help would be greatly appreciated. senior_tech@yahoo.com If your using MS Outlook copy your .PST file across and import it into the new install. >If your using MS Outlook copy your .PST file across and import it into the new install. No, don't import it. Simply use "File">"Open" -- Brian Tillman Smiths Aerospace 3290 Patterson Ave. SE, MS 1B3 Grand Rapids, MI 49512-1991 Brian.Tillman is the nam...

Can I send a recurring e-mail automatically each week
I want to send a e-mail with the same verbiage to the same person once a week and make it a recurrence with no end date. Can I set this up once in Outlook so it is scheduled automatically? -- Microsoft Office 2003 Version Students and Teachers Edition Windows Vista Home Premium Thank-you Happy new Year!! Carl R ...

How can I change 'Normal' Style for Word e-mails to 'Normal (Web)'?
Hi, I'm using Word as my e-mail editor in Outlook 2003 and want to change the default Style for e-mails from 'Normal' to 'Normal (Web)'. The problem is that new e-mails and replies in HTML format use the 'Normal' Microsoft Word 'Style', and this has no gap after paragraphs. The upshot of this is that when sending an e-mail, I have to press return twice to create a gap, but when the recipient views this, their software shows it as four gaps (the extra carriage return I typed + their correctly viewed HTML carriage return after each line). E.g. I type this: ...

Addressing within Exchange 2003
We are running Exchange 2003 SP2. We setup an MX record for a external email(alumni.cup.edu) these mailboxes do not exist within our exchange org. But when we send email to these externals email mailboxes we are getting the following NDRs: #5.5.0 smtp;550 Mailbox unavailable. #5.4.0 Is there a way in exchange to ignore these email address so that we don't get the NDR from within our Exchange Org? On Fri, 4 Aug 2006 08:08:02 -0700, Sabo, Eric <sabo_e@cup.edu> wrote: >We are running Exchange 2003 SP2. We setup an MX record for a external >email(alumni.cup.edu...

how do i add "Software Digrams" Folder in my Visio 2003
how do i add software diags folder in visio 2003 version. Like if i go to File->New it shows folders like brainstorming, project schedule, block diagrams but in my case its missing the Software Diags folder which contains activity diags, web mock ups, use case diags etc. please let me know how to get that template. thanks. Ankur What edition of Visio are you using? Check by going to the About Microsoft Office Visio dialog from the Help menu. "Ankur" <Ankur@discussions.microsoft.com> wrote in message news:F0D10BF0-A059-4A9C-B615-B99F3916F4E5@microsoft.com... > how...

Mail lMerge
Sorry folks. I asked a question and went to the hospital for a while and the question expired. I have an address list in excel 2007 and am using word 2007. In my address list I have a code column which should allow the selection of addresses to put on labels. I used to have a query section what allows for that but I cannot find query any more. can anyone help me? charles Questions here never expire, though it may become difficult to find the answer. The previous post received one reply, from Doug Robbins, as follows: See the article "Mailmerge Labels with Word ...

Install Exchange 2003 Server on new Hardware with same name
I got a new server to move my Exchange Server Installation. I want to keep the name I'm using now for my Server. Already read TechNet Article "How to Move Exchange Server 2003 to New Hardware and Keep the Same Server Name". Is there anything else that I should be aware of that is not on this TechNet article? I'm using a different Disk Configuration, does this matters? Should this be a smooth process? Thanks for any help you can give. The drive letters MUST match, because the paths of the databases are at the Active Directory. The disks can have different sizes than the or...

How To Copy MS Word mailing labels into Excel
I have a word doc that I want to put into Excel. I want to add some more fields to the names and addresses. Is this simple or do I have to learn how to program? Michael Rodriguez City of Grand Prairie Michael, have you tried to copy and paste the data into excel? -- Paul B Always backup your data before trying something new Please post any response to the newsgroups so others can benefit from it Feedback on answers is always appreciated! Using Excel 2000 & 97 ** remove news from my email address to reply by email ** "Michael Rodriguez" <mrodrigu@gptx.org> wrote in messa...

Reminders in Outlook
Since upgrading to Great Plains 9.0, several users are not getting their appointment reminders in Outlook 2003. They all show up at once after rebooting computer. Outlook settings are set appropriately. Any ideas? -- Steve ...

Outlook default to paragraph
To whom ever can help, > > When using Microsoft Outlook, and starting a new E- Mail, The default > format is to "paragraph" which double spaces. Is there anyway to > select under a New Message, Format, Style, "Normal" as the default? > > Thank you in advance > > Dave daveandivy@netidea.com >-----Original Message----- >To whom ever can help, >> >> When using Microsoft Outlook, and starting a new E- >Mail, The default >> format is to "paragraph" which double spaces. Is there >anyway to >> select unde...

Crash on 'Send"
My wife's Intel Celeron running ME started having this problem sporadically - now constantly. Outlook 2000 receives OK - everything seems fine until you hit the 'Send' button then Outlook crashes giving an error message that says 'Outlook has caused an error in <unknown> and has to shut down. If the problem persists you may have to restart your computer.' Re-starting however has no effect. I have re-installed Office. Used 'Detect & Repair' under the 'Help' tab, and installed all patches/updates from the Office site. But this error continues, now...

[Exchange 2003] Mail enabled public folder and sender address
I have a Windows 2003 domain with a native mode Exchange 2003 organization; there are some mail enabled public folders. When a user replies to a message in a public folder, the outgoing mail's sender address is the user's one; I want it to be the public folder's one, or at least I'd like the "reply-to" address to be set to the public folder's. How can I accomplish this? Thanks Massimo You would need to grant the user permissions to be able to Send As the public folder. By default, when you reply to a message that is in a PF, the PF is not composing the ...

Outlook 2003
Hello, we have one client pc with Outlook 2003 where the following problem occurs: if a mail is replied from a user created sub folder of the inbox, the reply will not appear in sent mails, but will end up in the same sub folder, sender and recipient appear as identical. The mail goes out properly though, it's just that Outlook sets internally sender = recipient and bounces the reply back to the subfolder in which the original mail is stored. This happens on a Win 2000 machine with SP4 and all updates, the other clients use Outlook 2000 or XP and there is no such problem. There are no ru...

cant start outlook pst file to large
Hi I hope somebody may be able to help im new to outlook and now I cant start outlook message says cannot open your default email folders pst file its too large as I cannot open outlook I cannot delete old folders See if this helps: http://support.microsoft.com/kb/296088 -- -Ben- Ben M. Schorr, MVP Roland Schorr & Tower http://www.rolandschorr.com http://www.officeforlawyers.com/outlook.html Author: The Lawyer's Guide to Microsoft Outlook 2007: http://tinyurl.com/ol4law-amazon "Ray" <Ray@discussions.microsoft.com> wrote in message news:B3B824DC-3C9B-4B1B-8EF3-61...

SMTP Connectors #4
Hi, I have a problem with two Front-End servers in NLB. I have two connectors with address space *, one connector with cost 10 the other with cost 20 for connector availability purposes. Inbound mails are targeted to FrontEnd1, outbound mails should go from FrontEnd2 (e.g. MX for FrontEnd1 cost is 10; MX cost for FrontEnd2 is 20) Connectors: FrontEnd1 - Address space * - cost 10 - bridgehead srv = FrontEnd1; FrontEnd2 - Address space * - cost 20 - bridgehead srv = FrontEnd2 The problem: If both servers are up and running and somehow some mail ends in queue on FrontEnd2 it correctly crea...