sending mail using an alias email address
We are using Exchange Server 2007 with Outlook 2007 clients. I have several
email addresses listed under my mail account on the Exchange Server for which
I "receive" email. However, the server will not allow me to "send" email
using any of these email addresses - as it only allows me to send using the
primary address for my email account. I get a message saying "You are not
allowed to send this message ... on behalf of another sender without
permission to do so." What settings do I need to change on the Exchange
Server so that it allows Outlook 2007 ...Forwarding a specific e-mail to an external e-mail!
The owner of the company would like to forward an e-mail received from a
specific customer's e-mail address to his external e-mail -
This is the process - Our customer (firstname.lastname@example.org) sends and e-mail to the
owner of the company (email@example.com). Whenever the owner of the company
receives e-mail from our customer firstname.lastname@example.org, the e-mail should
automatically be forward to the owner's external e-mail (email@example.com)
How do I do this? I tried a forwarding rule and it didn't work. Do you
have any other suggestions on how to accomplish this?
Thank you in advance for you...Remote users cannot send e-mail through Outlook
I have a few users who do not work in our office. They
have Outlook installed on their home computers and then
dial up to the internet and do a send/receive.
I have Exchange 2k3 on a Windows 2k server and the users
are configured to allow for SMTP/POP3. All was working
fine until earlier this week when they informed me that
they could no longer "send" mail. They get the
message "The TCP/IP connection was unexpectedly terminated
by your mail server. If this problem persists, contact
your LAN Administrator or Internet Provider".
The users can still receive mail ...Outlook Inbox running tally of e-mails in it
HELP ! This should be simple for someone but not me. I
used to have a number on the left side of my screen when
in my in-box that would tell me the total number of e-
mails in my inbox (normally around 200-300). This was not
JUST the new ones which are reflected on the folders
line. It was at the bottom of the page and would change
immediately if I deleted or added one.
I lost the number and want it back. How do I do that?
Thanks for any help anyone can give !
view - status bar
"Suzanne" <firstname.lastname@example.org> wrote in message
news:0bb901c3deda$1...Auto Forward mail to a group of External addresses
Can someone please tell me how I create an Auto Forward
to a group of external email addresses.
I want to setup an auto forward on my exchange so that
all mail sent to email@example.com is then forwarded
to a group of email accounts such as firstname.lastname@example.org,
Can someone please tell me how I set this up on an
exchange server. I know how to do it for an individual
but I can't work out how I create an auto forward for a
group of people.
Thanks for any advice!
what version Exchange? only the terminology is different...create custom
recipients/contacts ...New to Mail Merge
So I am checking to see if I can merge a list of names(roughly 450) into a
template in Publisher that will be used a name plate of sorts. I also want to
include years of services in the template, i.e. John Smith 12 years of
Is this possible and what is the easiest route?
Yes it is very possible in Publisher. There is a lot of help here:
If you decide to use Publisher there is a registry fix that will be
http://msauer.mvp...Attachments in e-mail sent to many users
I am trying to find out how to send an e-mail attachment to a lot of
different contacts in CRM 3.0. We were told there was a way but the
instructions don't work. The e-mail goes to all the receipents but no
attachment is every sent. Can someone please give me directions on how this
I have posted this in the AD group but thought I would post it here incase
somebody here has seen the problem.
I have two domains in two seperate forests. I have a trust setup between
them. I am in the process of doing a migration from the first domain
(abc.com) to the second domain (xyz.com). During the migration my e-mail
will still be going to the old mail server (Ex2000). Once I migrate a user
to the new domain and new e-mail server (ex2003) I need to forward any e-mail
that is going to the old e-mail server to the same user on the new domain.
In ADUG I setup the forward but wh...attachments shown for all incoming mail
All of a sudden I am now showing all incoming mail with
an attachment when there actually is none. Any ideas?
...Importing Messages From Another Mail Program
I just set up outlook express 6.00.2900.2180 for XP SP2 and wish to import my
messages and folders from Netscape 7.0 mail and when I follow the
instructions and click on the netscape Local Folder inbox file, I get a
message from outlook that says there aren't any messages in the file. I tried
to mail the files as attachments but that didn't work. Is there some other
way to export these messages .to outlook express.
Ask in an Outlook Express forum. This is an Microsoft Office Outlook forum.
Outlook Express is family of Internet Explorer and Outlook of the Office
Here is...Intelligent Message Filter (IMF) SCL for Junk E-mail being ignored
I have Exchange Server 2003 Enterprise SP1, and I recently downloaded and
installed Intelligent Message Filter.
In Message Delivery Properties -> Intelligent Message Filtering, I have
- Gateway Blocking Configuration
- Store Junk E-mail Configuration
All users have Outlook 2003 Professional installed.
Although I have SCL set to 8 for "Store Junk E-mail Configuration", Messages
with SCL 6 and others with SCL as low as 3 are being sent to the Junk E-Mail
I am able to see the SCL of the emails because I installed an SCL Column via
Forms using th...Changing e-mail address
dI´m trying to change mail-address in AD-Users and computer.
From "email@example.com" to "firstname.lastname@example.org", but it won't work.
On the tab "e-mail Addresses" i try to set "email@example.com" as Primary, but it
don't stay that way. If I open directly and check it seems right, but close
and do one more client, the first has change back to "firstname.lastname@example.org".
What am I doing wrong ????????
You will need to uncheck the checkbox "Automatically update e-mail addresses based on recipient policy" for the change to stay.
Also make sure that you ...Too many different cell formats #6
I am running into the error message:
Too many different cell formats
Is there a solution to lowering the number of formats I
am using? Just trying to change them to make some
consistent gives me the same error message.
I tried running the search on the forums on my topic but
they have been disabled for a Microsoft upgrade.
One idea -
Rob Bovey's excellent Utilities add-in will list all the formats in use in
your workbook, allowing you to manually delete what isn't being used.
You can also see the source code for ...Auto forward incoming mails.
How to configure such that all incoming mails to exchange will auto forward
to my personnal email address?
You can create a rule for that; Tools-> Rules and Alerts
Note that automatic forwarding is disabled by (secure) default on the
Exchange server. To enable see;
Robert Sparnaaij [MVP-Outlook]
Tips of the month:
-What do the Outlook Icons Mean?
-Create an Office 2003 CD slipstreamed with Service Pack 1
"Emyeu" <email@example.com> wrote in message
news:uNQsdGAkEHA....cannot create profiles in win 7 mail 32 bit
I upgraded to WIndows 7 professional 64 bit and still cannot get my MS Office
2003 to work properly. All the programs except Outlook seems to work fine.
I am totally unable to open outlook without mail profiles. I click on mail
in control panel and I get low memoery or resources too low. That's
impossible. I have 4GB RAM and 1GB VRAM.
In addition, I noticed to night that while I created a profile for myself as
Admin, I do ot have admin permissions EVEN IF I say 'run as admin" If I open
my profile, it syas Admin under my name yet shows up as standard user. I...How to clear old e-mail addresses?
My address book is empty, and my contact list is empty (those show up empty
when I use Tools, Address Book), but when I send a new e-mail message, on
typing the first letter of the addressee name, a drop-down list appears with
e-mail addresses for everyone I've ever e-mailed. How can I clear out these
Thanks for any ideas.
You can simply use the cursor arrows and delete them or you can delete the
file *.nk2 that is located in: C:\Documents and
But this options will delete all autoresolution addresses-
Ricard...E-mail box sizes. Echange System Manger.
Now and then I need to find out the size of the various e-mail boxes in
Exchange2000. The problem is that the size indicated in the Exchange System
Manager do not reflect the same size when you look into Outlook.
Is the a way to figure out the correct e-mail size?
If not. Is this better in Exchange2003?
Thank you in advance.
I'd consider the Exchange value to be the most important given this is what
will be used for mailbox quotas, etc.
"Dag N" <firstname.lastname@example.org> wrote in message
> Now and then ...Refreshing from Outlook (outgoing/Ingoing mail)
It seems I always have to press F5 to check for incoming
and outgoing mail (I am dial-up) and then it looks for new
mail....Is there a way to get it to constantly check for
new mail every few minutes???
I already have the option to "check for new messages
every..- minutes." but it doesn't seem to work.. - Can
anyone elighten me as to how to get outlook to check for
What version of Outlook?
Make sure Outlook is not placed in Off-line mode as well; File-> Work
Roady [MVP] www.sparnaaij.net
Microsoft Office and Microsoft Office related News
Also Ou...sending mail 05-20-10
The message could not be sent. The authentication setting might not be
correct for your outgoing e-mail [SMTP] server. For help solving this
problem, go to Help, search for "Troubleshoot Windows Mail", and read the
"I'm having problems sending e-mail" section. If you need help determining
the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was 'email@example.com'. Subject 'Hello',
Account: 'pop-server.tampabay.rr.com', Server: 'smtp-server.tampabay.rr.com',
Protocol: SMT...Deleting "mail to:" email address links
I have a relativly straight forward spreadsheet where I
am maintaining a large address list. It contains a
homeowner's lot number, name, address, telephone #, and e-
mail address. When attempting to select random cells for
data entry/modification, I receive and automated
message " mailto: (a random e-mail address) - click once
to follow. Click and hold to select this cell."
I have no idea where/how this message/feature/function is
being attached to these cells but would like to eliminate
it. Since seeing these messages, the size of the
worksheet has been increasing in ...Print 2 A5 mail merged tables onto each A4 sheet
I have created an A5 document that has a table where fields are filled in by
mail merge, there is well over one hundred records so I would like to get two
A5 prints onto each A4 sheet. I have tried setting the print dialog to 2
pages but it still only gives me one small print per A4. Is there a way I can
make this work?
Don't do it in the Print dialog. Do it in the Page Setup dialog (under
"Multiple pages"). Your merge should then work correctly.
I can attest that this will work, as I have created a directory set up this
Suzanne S. Barnhill
Microsoft...Junk E-Mail filter unavailable in online mode
We had Outlook 2003 clients on an Exch 2000 server, and, as expected, the
Junk E-Mail filter was not available when working in online mode. In cached
mode it was working fine. Now, after upgrading the organization and server
to Exch 2003, the Junk E-Mail filter is still not available in online mode.
According to all the MS documentation this should be working.
All of the documentation that I have know of says that it works on in Cache Mode. Can you give us a link to the documentation that you saw that shows it will work with online profiles?
Matth...IE 6/ActiveX assert in CTLNOWND.CPP line 305
I have a problem with an ActiveX inside a web page.
A random ASSERT in CTLNOWND.CPP line 305 occours during a GetDC first call.
It's seems wnd handle is still NULL (it begin valid immediatly after). If I
retard calling putting a button in html page it work.
CDC* COleControl::GetDC(LPCRECT lprcRect, DWORD dwFlags)
ASSERT((m_hWnd != NULL) || (m_bInPlaceSiteWndless && m_bInPlaceActive));
This problem occours random (more times on faster machines and in release
mode) and just on "init" time on my control.
Probably my control does this operation in ...Missing mail after VPN Outlook setup
Last week we setup VPN to be able to read mail from home (no OWA).
After installing Outlook at home and connecting to the exchange server, and
syncronizing the data I got all mail/contacts etc on my home computers
BUT, when I got to work the day after, my Outlook on the work computer was
empty, no mails or nothing.
Looking in the Exchange server at the mailaccount I can se that it contains
over 1000 emails so they seem to still exist on the server.
What could this be? Is there som configuration needed?
Did you configure the home computer to deliver mail to a personal folde...MS Exchange and external mail relay
In our organization we are planning if moving from Linux (postfix) to MS
We plan to implement Postfix (in DMZ zone) as a mail relay for Exchange
server (in LAN).We have about 400 users on the same external domain like
The trick is that about 100 of users only need mail address (not also a
domain account), so we're thinking if it is possible to create 300 of our
users of @comany.com domain on Exchange server, all other users that need
only company mail (also @comapany.com) will have mailboxes on mail relay
(postfix), not on Exchange server.