EXE file distribution issue

Hi:

I am about to start distributing some software as an attachment to e-mails. All the
recipients are happy with his arrangement, but we have run into a snag. For 99% of us
OUTLOOK is set to maximum protection, and we don't want to change it. Unfortunately the
Setup software I am using creates an EXE file, and outlook wont let any of the recipients
even look at it much less open it!.

Is there some way that recipients can override the inabilty to open an exe file on an
exception basis?  Can one create a script to make this easy for them? For example if the
exe comes from a specific source its OK otherwise its not acceptable!

Help much appreciated.

Regards

John Baker
0
Baker.JH (10)
2/2/2004 5:23:30 PM
outlook 87535 articles. 11 followers. Follow

1 Replies
343 Views

Similar Articles

[PageSpeed] 36

"John Baker" <Baker.JH@Verizon.net> wrote in message
news:1q1t101gp33ake0v96gdltg9udpre1lk4j@4ax.com...
> Hi:
>
> I am about to start distributing some software as an attachment to
e-mails. All the
> recipients are happy with his arrangement, but we have run into a snag.
For 99% of us
> OUTLOOK is set to maximum protection, and we don't want to change it.
Unfortunately the
> Setup software I am using creates an EXE file, and outlook wont let any of
the recipients
> even look at it much less open it!.
>
> Is there some way that recipients can override the inabilty to open an exe
file on an
> exception basis?  Can one create a script to make this easy for them? For
example if the
> exe comes from a specific source its OK otherwise its not acceptable!
>
> Help much appreciated.
>
> Regards
>
> John Baker

Zip it.


0
me9 (928)
2/2/2004 5:28:52 PM
Reply:

Similar Artilces:

Distribute an add-in using a URL
Hi! I'm trying to get an .xla file to load up in the Add-ins from a URL. I receive the following message when I try to add the URL link.."You cannot use an Internet address here. Enter a path that points to a location on your computer or on the network." ...

Prohibited File Type?
If someone sends me a picture file as an attachment to an email message I get shown "Prohibited File Type..file deactivated". I can see the pic in the body of the message but can't open and view the picture file by clicking it? Similarly if I try to attach a picture file to a message I send that also gives the same warning both before sending and to the recipient? The files In question are jpg files. Anyone advise please? Tools/Safety/Options/Security Uncheck - do not allow attachments to be save or opened - block images and other external content Check (op...

.xls files opening in IE rather than xls
When opening files downloaded from the web, they are opened in an IE windo rather than the appropriate Office 2003 tool (word, excel, etc.) From a previous post: There's a setting in Windows that you can change. In win98, I can do this: Start Windows Explorer View|Folder Options File Types Tab scroll down to MS Excel Worksheet Select it click the edit button There's an option to "browse in same window". Uncheck it. That's where you can toggle the "confirm open after download", too. How to Configure Internet Explorer to Open Office Documents in the Appr...

Hidden Folders and Files
I am using Windows XP pro, 2nd, service pack. For some reason, I am now unable to see my hidden files and folders, even though I was able to a short while ago. I don't know what I have done to change this. Under folder options I have selected "Display the contents of system folders" and "Show hidden files and folders" However they are not visible. Any advise? Thanks. leasider<SPAM> wrote: > I am using Windows XP pro, 2nd, service pack. > > For some reason, I am now unable to see my hidden files and folders, > even though I was able to a short ...

How do I install when "file ZF561407.CAB can not be found"
...

Excel 2000: File >> New menu command causes application crash
This is occurring on only one machine on a network! After saving an emailed Excel template to a standard network location for Microsoft templates, when selecting File >> New this installation of Excel 2000 crashes ("Excel not responding" on Close program dialog). On other machines there is no problem. Have "repaired" Microsoft Office using that option from the installation CD-ROM, have removed Excel from Office installation, rebooted and reinstalled Excel. No change on the problem behaviour. Everything else appears to be working just fine in this copy of Excel. We ...

EXCEL.exe has generated errors
For an knowned reason, the following message recently started to display when clicking on EXCEL on an Windows 2000 system. EXCEL.exe has generated errors and will be closed by Windows. You will needed to restart the program. An error log is being created. (OK) Attempts have been made to repair, deinstall and reinstall Office 2000. However, the above message still displays with trying to bring up EXCEL. Can anyone help? This WebPage by Chip Pearson provides a good place to troubleshoot. http://www.cpearson.com/excel/StartupErrors.htm HTH Paul --...

distribution group / delivery report exchange 2003
an originator from outside my exchange 2003 organisation is sending an email to a distribution list, but he never receive a delivery report global config, message format for domain * (is ok) [x] delivery report [x] non delivery report "Ronald" <rasch@ltsa.de> wrote: >an originator from outside my exchange 2003 organisation >is sending an email to a distribution list, >but he never receive a delivery report Did he request one? -- Rich Matheisen MCSE+I, Exchange MVP MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm ...

a larger window to view the files
Hello, When I click on the "FILE, OPEN" menu items I get a dialogue box showing a list of all the Excel files on my directory and then I can chose the file I want to open. Often, before I select which file I want, I need to resize the columns (Name, Size, type, modified) within that dialogue box to look at various properties and it would be ever so useful if there existed a Macro or utility that presented the list of files in a somewhat larger window so that I did not need to move the column widths each time. Needless to say, this does not just apply to Excel but that is a prog I ...

Unable to import Quicken file to Money
I am trying to import my QUICKEN 2004 data file (QDATA.QDF) into Money 2004. I followed all the directions and validated the QDATA file first, but NOTHING imports. All I get are messages that indicate "Your Quicken file contained invalid transaction types". The only transactions I have are account (Checking and Savings) transactions - debits and credits. I have tried this a number of times, and downloaded all updates to Money, but nothing ever converts. Can anyone help? You can not import Q2004 into M2004. You'll have to wait a few more days and then import it into M2...

HQ Client and invalid store id\connection issue
Have client with four stores. Running RMS V 2.0. New store is number 4. Have been able to establish connection to HQ but get this message on the log: HQ message contains an invalid store\id connection passowrd. Although the message is quite clear. Where exactly should we be making the adjustments? Thank you veruy much. 2 places: In HQ Manager, Admin/Stores Open properties for Store 4 ( I believe you need to be in Maintenence Mode to do this) Go to connection Schedule Tab - near the bottom of the tab you can enter a password - this is unique to each store. In HQ Client, File/Configurat...

outlook cant find file MSOE.DLL
when i try to open outlook an error msg comes up - cannot locate file MSOE.DLL. when i went to start, find, folder/files and searched for it i found it. how can i fix the problem please help. If you're using XP, it should be in the Documents and Settings\User Name\My Documents\Outlook Express. This implies that it associates with the user who's logged into the system. Are you logging in as User Name in the above example? If not, that's why it can't find it. Further help is available in MSOE.TXT in the same sub-directory. Good Luck! <dinky_devil@hotmail.com> wrote...

get a list of file in a directory
Hi. what would be the best way to return a list of files in a directory. I know in VB you could use the dir function, but what should i use in MFC. Doen anyone know of a class available where I could say return all the file in a certain directory and its sub directories Regards Dylan Take a look at the CFileFind MFC class. -- Cheers Check Abdoul [VC++ MVP] ----------------------------------- "Dylan Franklin" <dyl2000@lineone.net> wrote in message news:eHHBr0MxDHA.2436@TK2MSFTNGP09.phx.gbl... > Hi. > > what would be the best way to return a list of files i...

Visio File Summary Dialog Box is showing wrong file name and size
Hi all, I am using Visio 2003 ActiveX Control in my application using VB.NET 2005. I am calling "visCmdFileSummaryInfoDlg" Command to open File Summary Dialog Box. Dialog Box is open successfully but it always showing Template file size instead of open file size in General Tab. The information it shows is: Type: Microsoft Visio Drawing Location: Size :(928 bytes) Based on: Template - ValueStreamMap.vst Can any one let me know about any property or way so that it shows correct file size? Thanks Asif Can we assume that the new drawing has been saved to disk before you call th...

2 mirror files with :1 and :2
Not sure how, but have 1 excel file, lets call it FILEA.xls and when I open it, it opens a FILEA:1 and a FILEA:2 workbook. Any change made to FILEA:1 gets repeated in FILEA:2 and vice versa. Looks like some sort of mirroring, or changes being tracked, but track changes is turned off. Any help is appreciated! Hi you've opened two windows of the same workbook (from the window /new window menu) - just close one and then save - this should solve the problem Cheers JulieD "DJR" <DJR@discussions.microsoft.com> wrote in message news:F0F6BDF5-9DC2-486E-947C-ABBB6C4544...

Deserialization issues, handling integer properties correctly?
Hello, I'm running into an issue when I'm deserializing an xml file into my = custom object. This issues revolve around integer properties (though = I'm sure others would apply). I have to account for my xml response to = be empty (<myintegerfield />), if I simply use one property, I get = errors that my "Input field not in correct format" when I deserialize. = I've come up with a fix, but I'm not sure if it is the best path. = Basically I'm defining two properties, one that the XmlSerializer uses, = and one that I actually interface from with exter...

Outlook Data File Not Closing Properly
I always get the following error message when starting Outlook 2002 (running Office XP and Windows XP) : "The data file 'outlook' was not closed properly. The file is being checked for problems." I get this message everytime (whether I hibernate or shut down) when I start Outlook. This checking of the file can take anywhere from 30 seconds to 5 minutes and is very frustrating. Anyone have any idea what the issue is ? This started happening just after I installed XP SP3. ...

Incompatible file format.
Have been using Money for years and have Money Deluxe 2007 installed on both my home (Vista) machine and my notebook (XP) machine. Problem is when I go on the road and take my Money file with me, my XP machine says that the file is incompatible and was created with a newer or updated version of Money. Both machines have the same version and are both include the latest updates. What gives? Did Microsoft create something in Vista that precludes using the Money file under any other operating system? I may have to switch to Quicken or even a Linux version if they keep this up.............

OS 8.6 Office '98 no "File/Save" in Word
OS 8.6 Office '98 All of the sudden, there is no "File/Save" in Word. Not that is grayed out, it just is NOT there at all. The first time this happened, a reboot got it back, now that doesn't work. In article <cf47e17c.0409130841.490a65f9@posting.google.com>, jmorse@premier1.net (James Morse) wrote: > OS 8.6 Office '98 > > All of the sudden, there is no "File/Save" in Word. Not that is grayed > out, it just is NOT there at all. > > The first time this happened, a reboot got it back, now that doesn't > work. Choose Tools/Cus...

Excel Issue
Hi If (for example ) I create an excel doc like in the forward example and print it everything is O.K. Example (4 column * 4 Rows): aaa bbb ccc ddd eee fff ggg hhh iii jjj kkk lll mmm nnn ooo ppp But when I add border to that data it add also shadow to some of the data (to the aaa bbb ccc ddd elements). How can I avoid it ??? all I want id the border and not the sadow !!! I'v Reinstall SW and its Ok "BoazBoaz" <pasternak5@bezeqint.net> wrote in message news:e7ZAy8DUHHA.5060@TK2MSFTNGP06.phx.gbl... > Hi > If (for example ) I create an excel d...

How to save the value in the CEdit control to a text file?
Im generating a random number to the CEdit control and now i want t save all of this value to a text file. I dont know to code it in the way of MFC. I hope whose know it can send me the soding cause im running out the time to do my project thanks You can use GetWindowText to get its contents and then use CStdioFile class to write the text. MSDN has enough documentation on this. -- Ajay Kalra [MVP - VC++] ajaykalra@yahoo.com "TLee" <anonymous@discussions.microsoft.com> wrote in message news:F730B5D6-85F7-45D9-80D9-C43598FA47B6@microsoft.com... | Im generating a random numbe...

Converting bidirectional text files to and from ANSI
I need to convert bidirectional text files to and from ANSI format. Excel refers me to a "ConvText.exe" file that I do not have. Does anyone have this file or how can I get the file. Using excel 2002. I had never heard of Bidirectional text files, so I googled and found this: http://office.microsoft.com/en-us/assistance/HP052626761033.aspx Convert bidirectional text files to and from ANSI And the top of that web page started with: The ConvText utility is available on the installation CDs for Microsoft Office language versions that offer right-to-left support. So if you'...

Is a mail having an attachment
I want to create a report based on the log file located at \Excsrver\Tracking.log in MS Exchange Server 5.5. Using the log file, how will I know that a mail was having an attachment or not ? ...

Issue with formula is Pivot table
I have the following formula in a pivot table: =IF(ISBLANK(Qtr[-1]),IF(ISNUMBER(Qtr[-2]),(Qtr[-2]*-0.08)+Qtr[-2], "),IF(ISBLANK(Qtr[-2]),0,Qtr[-1])) First to the issues that I am experiencing. First, the formula wa originally added as the one below but then updated to the formula abov to correctly reflect what I was trying to accomplish. =IF(ISBLANK(Qtr[-1]),IF(Qtr[-2]<>0,(Qtr[-2]*-0.08)+Qtr[-2], "),IF(ISBLANK(Qtr[-2]),0,Qtr[-1])) This issue is the original formula appears in the very first cell o the pivot table and then periodically through out the column. So, yo see ...

Excel File Does Not Open From Windows Explorer
When I try to open a MS Excel file from Windows Explore, MS Excel starts but the file will not open. Is there anything I can do to fix this problem. Thanks in advance! Dwight Dwight, Tools, options, general make sure the 'ignore other applications' is not selected. If this does not sort out the problem you may need to go to this as in this post from Beth Melton which we found when we had the same problem and it solved it. ***************************************************** It sounds like is a problem with the file associations. Go to Start/Run and run this command: Excel /re...