find action on log file
I want to use outside tool to find who made some update on table in my
I know that there are many tools for this. But can they do it on simple
Roy Goldhammer (firstname.lastname@example.org) writes:
> I want to use outside tool to find who made some update on table in my
> I know that there are many tools for this. But can they do it on simple
> recovery model?
No. If you are using the simple recovery model, the contents of the
log is wasted away everyonce in a while.
Well, if the disk area has not been overwritten...Outlook 0x800ccc0d error when Norton e-mail protect enabled: see hosts
This post is made to help others solve this issue, based on my
- Outlook works perfectly well when Norton Anti-Virus e-mail
protection is disabled
- Outlook cannot retrieve incoming messages when NAV e-mail protection
is enabled, message being: pop3 server not found, error 0x800ccc0d
This symptom, and possible solutions, are exactly the object of
Symantec support note:
Please read this note first ! The object of this post is to add
another possible solution to this problem.
NAV email protection sets up...File size #11
I have read the other discussions on file sizes but they do not seem to
address my problem.
I have an Excel file that is 12mb large with low-res jpegs in it. This file
also has merged cells to make it look pretty. Does Excel look at these merged
cells as graphics? Is this why they are too big? I have run a macro to make
sure that it goes to the last cell.
How can I get the file smaller?
How big are the graphics? If you remove them from the file, what is the size
of the file and what is the size of the graphic files?
To be sure you do not have extra formatting, if you open the file...Publisher file to PDF, image problems.
when I print a Publisher file to PDF, my logo comes out fuzzy.
Michelle1031 <Michelle1031@discussions.microsoft.com> was very recently
heard to utter:
> when I print a Publisher file to PDF, my logo comes out fuzzy.
If you zoom in on your document in Publisher, is your logo fuzzy?
What PDF quality settings are you using?
Ed Bennett - MVP Microsoft Publisher
I have tried that b4 and had no success. I even had a DTP
specialist try it, it still does not work. The only thing I can suggest
is to insert the photo from ur computer into the document after you
conve...Problems with reallocations in the Advanced Budget
I am a using the Advanced Budget in Money and for years I have reallocated
money between categories and months. recently when I updated my transactions
all my real locations were wrong. Basically the money I allocated from March
to February was not only back in February it reversed it and made it look
like I sent Money from February to March so now any category that I have
reallocated money (an that is most) is wrong.
Does anyone know of a way to fix this, I have run the repair, but that did
Microsoft Money Plus Premium
I am so glad to see that I am...circular files; iterating to a "correct" solution
I am working with a circular file. I have been making changes to the file,
and I have noticed at times when i manually calculate that the file iterates
to an obviously "incorrect" solution.
No amount of changing the max no of iterations or the max change seems to
fix the problem. It iterates to the same "incorrect" solution every time.
It is like it is stuck in a rut and can't get out.
I have also noticed that, if I manually calculate each worksheet separately
(that is, hit shift - f9 simulaneously on each worksheet individually, from
left to right) all the ...OL 2002 Hanging up When Attaching Docs
I have been having a problem recently that is probably an easy fix .... just
need some guidance.
Running OL 2002 on an XP PRO machine connected to a Windows 2000 Server and
Exchange 2000. Everytime I go to attach a file to an email it takes forever
to navigate through the trees, often resulting in the program freezing.
Have tried Detect and Repair but no difference. Problem just started a few
weeks ago but have not added anything to my system.
Can anyone help?
...Attaching Contacts to new email
Creating a new email. When contacts folder has "shared" contacts and
"personal" contacts how can you set your personal contacts as the default?
Example: creating a new email having never addressed the "send to" contact
before, you hit the "To" button. Currently my "shared" contacts opens up but
I would like my "personal" contacts page to open instead of having to drop
down to "contacts" to bring up that list.
Is there a solution to this?
On 2/26/2010 10:21 AM, assistantneedshelp wrote:
>...owa cant open ppt attachments
i have an exchange 2003 cluster
when a user tries to open or save a powerpoint attachment it hangs at 97%
all other attachments open fine
...Maximum file sizes
Is there a recommended maximum file size for Excel 2000.
PC spec 2Ghz P4 with 256 Mb
Any advice appreciated
Does Not Exist
have a look at
"Deus DNE" <email@example.com> schrieb im Newsbeitrag
> Is there a recommended maximum file size for Excel 2000.
> PC spec 2Ghz P4 with 256 Mb
> Any advice appreciated
> Does Not Exist
...Using Relative path for XML data file?
Is there a way to specify a relative path to an XML data file imported into
Excel 2003? I am writing a web app that generates report data as XML for the
user to download to their local machine. This data is to be consumed by an
Excel reporting spreadsheet, which contains display-formatted tables and
charts that are mapped to various data fields in an XML Map, which is in turn
linked to the xml data file they will download.
The idea is the user only needs to download the data for updates, not the
whole spreadsheet. However, since I cannot predict the path where the user
will store their...How to repair a .dll file in IE8
Several days ago I noticed in my Dependency Walker that the IESHIMS.dll files
has a yellow circle with a question mark on it. What does this mean and How
do I repair it?
OS: Windows Vista Home Premium
Browser Internet Explorer 8
See the History tab on that dialog.
A web search for ieshims.dll files will also help you find a solution for
"TW" <TW@discussions.microsoft.com> wrote in message
> Several days ago I noticed in my Dependency Walker that the IESHIMS....Linking files 2 ways
I have a work book that is linked to another and vise versa.
Workbook A is where the input of data is made;
Workbook B has a link to the input from workbook A;
Workbook A retrieves the altered data back as a link.
Although this all works fine with both books open, I note that if I open
workbook A by itself, that the data it retrieves from Workbook B is not
updated . If However, both books are open, there's no problem. I thought
linked books were updated automatically if the Update remote references has
been selected?? But it appears that the second book is not updated until it
...OL2007 not move big files from outbox to sent
We have 2 computers with separate email accounts on Roadrunner. One machine
has XP with Outlook 2002-sp3 and works without any problems. The other has
Outlook 2007 on Vista and has problems sending files over a meg or so in
size. It seems to actually send the file but the file remains in the
outbox folder and does not move it to the sent folder. I say it "seems" to
send the file because some people complain of getting muliple copies and
others don't seem to get them at all. If I hit send again (not set up for
auto send) it seems to send the file again (why some ...unsolicited entry in the folder "Temporary Internet Files"
I am working on a programme which browses web sites and runs under XP.
The http download is as follows:
pServer = Isession -> GetHttpConnection(strServerName, nPort);
pFile = pServer->OpenRequest(CHttpConnection::HTTP_VERB_GET,
strObject, NULL, 1, NULL, NULL, dwHttpRequestFlags);
if(dwStatusCode == 200)
pFile -> QueryInfo(HTTP_QUERY_LAST_MODIFIED, &sysT);
status.lastMod = sysT;
if(DBlastMod == status.lastMod) //URL content has not changed
since the last visit
Has anybody ever seen an error message (0x800cccF6) message? I cannot
configure my Outlook to retrieve Hotmail. Works with other profiles on this
computer running winxp.
> Has anybody ever seen an error message (0x800cccF6) message? I cannot
> configure my Outlook to retrieve Hotmail. Works with other profiles
> on this computer running winxp.
If you have a free Hotmail account, note that it won't work anymore (even
your other profiles will eventually have problems) - see
...Having problem with spoofing email
Our users just received multiple email from different users outside the
company. In the To: line, it shows his user name correctly but when he print
those email, the To: line was showing somebody else name on the print out.
Is there a way to block this behavior? I'm using E2k3. For some reason our
spam (postini) didn't pick up these emails.
Could you please post the message in raw format (including the mail headers)
> Our users just received multiple email from different users outside the
> company. In the To: line, it shows his user name cor...AD Sync problem
One of my DC was disconnected from the network for quite a long time and
cannot be synchronized with AD anymore.
I have been trying to apply the http://support.microsoft.com/kb/325850/en-us
procedure to reset the machine account password.
After launching the command "netdom resetpwd /S: ....." I've got the
following error message :
"The machine account password for the local machine could not be reset.
Echec d'ouverture de session : unknown user or incorrect password. The
command failed to complete successfully."
ANy idea to help me ?
Man...Problem with Range
Using Windows & Excel XP.
I have a worksheet that has times located in every other column, A1:A30,
C1:C30, E1:E30. I then name the range "times". I want to find the count of
times that are between 0:30:00 and 0:39:59 (30 and 39:59 minutes). I write
=COUNTIF(times,">=" & TIME(0,30,0)) - COUNTIF(times,">=" & TIME(0,39,59))
but get the error #VALUE!
I have tried writing a formula for times in one column and consecutive
columns and it gives the correct count, it is just when the times in every
other column that th...Moving incoming mail automatically to specific folders.
I have three separate E-Mail Accounts (1,2, and 3)
I have created three subfolders under Inbox (Mail1, Mail2, Mail3)
How can I automatically get the mail sent to the correct Mail in location
(Mail1,Mail2 or Mail3).
I am sure the answer like everything is easy when you know how but I have
just spent an hour trying!
On Mon, 2 Jan 2006 00:24:44 -0000, "EddyStone" <firstname.lastname@example.org>
>I have three separate E-Mail Accounts (1,2, and 3)
>I have created three subfolders under Inbox (Mail1, Mail2, Mail3)
>How can I automatically get the mail sent to ...Excel button problem
I have a macro that copies a worksheet in the active workbook and puts it
into a new workbook - then formats it and deletes any buttons on the
On the first click on the button the macro works ok.
On the second click, it fails because the all assigned macros on all buttons
in the active workbook changed from "mba" to "book1!mba". Book 1 doesn't
exists (wasn't opened, wasn't saved, doesn't have the macros).
I've never experienced this problem before??
Can anyone help to solve this problem?
The macro to do this is c...WCF Client serialization problem
I posted the problem on another forum, and to prevent duplicate posts,
but get as many professionals as possible to look at it, I include the
url in this post. Please help!
...Autonumber created.. problems in the future?
I managed to create an autonumber in Microsoft CRM. I did this by
making a field "Number"(in the database "New_Number") and I published
it on the form.
Then I went To the SQL server and I changed the field in the table to
Identity Yes, Identity seed 1, Identity Increment 1.
I locked the field on the form.
I think that this is not supported by Microsoft. But has anybody got
any idea which troubles i could get with this configuration?
Do you know all add-ons for Microsoft CRM? Visit http://www.pimpmycrm.com
The biggest dange...How to automate increasing the form cache registry/file etc...
I want to roll out a batch file to make a number of tweaks to CRM
The body of it would go
REGEDIT /S Kerberosefix.reg
REGEDIT /S ForceFormreload.reg
REGEDIT /S OutlookFix.reg
It would also rename OSA.exe to OSA.bad
Remove OSA.exe From the startup menu
I need help finding a way to use my batch file to increase the Outlook
Form cache from the default 4MB to 50 MB.. This makes CRm more stable
and faster for communications. I dont want to manually do this, as it
time consuming, are my end users would not be reliable in doing it
I also want to make another batch file or button that...outlook 97 and express email problems
I am currently on an IBM X21 laptop and is running windows
98 se with office 97 pro. I recently experienced some
problems with outlook (illegal operations etc) and
reinstalled office to fix the problem but since then I
have not been able to send or recieve emails with outlook
97 and outlook express 6. I simply get an error message
saying the host can't be found (but does exist and I can
ping it successfully). Any suggestions on what I might do?
I have tried creating new accounts in windows mail and
outlook express, but I still get the same error.
Thankyou in advance!