Lost Active Directory for Microsoft CRM 3.0
Hi, We recently had a server failure on our Domain Controller which was
unrecoverable and our backups for active directory failed to restore.
The CRM database and application are on a seperate server so is fully
intact. But we have lost the AD, which means no access.
My question is what is the best method if any to recover the CRM system?
I was hoping in version 3.0 this is possible as i know 1.2 was a nightmare
due to the security descriptors.
Am i able to reinstall and attach to existing database and apply CRM
You're in luck, this shouldn'...Showing 0 after decimal with ROUND
I'm using the ROUND function like this:
=ROUND(C29*(92%),1) &- ROUND(C29*(108%),1)
Unfortunately, if the numeral after the decimal is a 0, then it doesn't
display. How can I force a 0 to display after the decimal?
Format the cell as Number with 1 decimal place - it would appear to be
formatted as General.
Hope this helps.
On Dec 4, 1:44=A0pm, Libby <Li...@discussions.microsoft.com> wrote:
> I'm using the ROUND function like this:
> =3DROUND(C29*(92%),1) &- ROUND(C29*(108%),1)
> Unfortuna...Lost Outlook contacts
I recently backed up my hard drive on DVD, then also kept
the entire contents to another HD. I then reformated my C;
drive, and reinstalled all of my programs.
When I searched for my outlook info, I could only find
backups I had specifically made for export (These are .PST
files). Where was Outlook storing all of this information
before, and have I lost it all? I hadn't made a backup for
a few months, but all of the info was there each time I
opened the program.
I recently had to reinstall my OS and drivers on a new
hard drive. I have access to my old drive and my data is ...Multiple domains on one Exchange server / All but one domain shows up as spam #2
I am sorry if this is on the board somewhere but I have been searching
forever and havn't found a hint yet.
I have multiple domains setup on my exchange server. Lets say abc.com,
def.com, and hij.com. We only send email with @abc.com but can receive
from any domain name. Recently we merged with another company and we
brought back their email to our server, lets say xyz.com. Now I
configured a new recipient on Exchange 2003, so I now have two
policies. The first policy has the three original domains in it with
@abc.com as the primary domain. In the second policy I have configured
xyz.com t...VB Macro #2
I have a macro that is generating Excel files. When the macro runs, it saves
two different tabs in the workbooks as values. It needs to test and wait
until the formulas that are pulling amounts from another database are
correctly populated with the amounts.
Right now, I am getting N/A# instead of amounts for some, but not all, of
the files. I think the problem is that the formulas have not completed
pulling the amounts before the macro pastes that tab as zeros. (N/A# is what
appears when the formulas have not completed calculating - once they have
completed, the N/A# is replaced ...VCR to DVD Part 2
Many thanks for previous answers.
Yes, finalizing the DVD worked
I found that DVD-R need finalizing but DVD+RW disks do not
But why was I able to play the unfinalized DVD-R on one machine and not on
What was special about the first PC?
Bernard Liengme wrote:
> Yes, finalizing the DVD worked
> I found that DVD-R need finalizing but DVD+RW disks do not
> But why was I able to play the unfinalized DVD-R on one machine and not on
> two others.
> What was special about the first PC?
Almost anything will play a finalised D...Importing AOL Email File Cabinet
Is it possible to tranfer a complete AOL Email File Cabinet into outlook?
AFAIK, no, but see if anything here will do it:
http://www.slipstick.com/config/convmsg.htm - check out Address Magic Plus
first, it can convert almost anything.
Diane Poremsky [MVP - Outlook]
Need Help with Common Tasks? http://www.outlook-tips.net/beginner/
Outlook 2007: http://www.slipstick.com/outlook/ol2007/
Outlook Tips by email:
EMO - a weekly newsletter about Outlook and Exchange:
Outlook Tips: http:/...cell contents revert to 0 when i click on the next cell
I put a number into a cell click on the next cell and the first cell reverts
to 0. If I format to number with 2 decimal places it will be ok but when I
try to take out decimal places it goes back to zero,
You haven't said what number you are trying to put into the cell, but I
suspect that the number is less than 0.5.
A quick test shows that if you set the cell to no decimal places then enter
a number less than 0.5 it is displayed 'rounded down' so it will show as
zero, if it's 0.5 or above it displays as 1.
If you need to put numbers less than 0.5 into youe c...set print area #2
Where is the "set print area" button in Excel 2002 that was in Excel '97?
> Where is the "set print area" button in Excel 2002 that was in Excel '97?
Are you sure it was "standard"? Only way I could get in was to right-click
the toolbar|Customise and drag it to the toolbar from Commands|File
...Exporting contacts in a csv file
I am a mysterious problem exporting my contacts as csv file. The
resulting file has only 58 contacts out of almost 1200 contacts in my
outlook. These contacts appear to be the last 58 contacts added. (I
say appear because the attribute "createdon" is not exported so I
can't be exact. Why is this?
cinnamngrl <email@example.com> wrote:
> I am a mysterious problem exporting my contacts as csv file. The
> resulting file has only 58 contacts out of almost 1200 contacts in my
> outlook. These contacts appear to be the last 58 contacts added. (I
> say appea...OEM publisher 2002 Sp1-2
I have the OEM version of Publisher 2002 and cannot find the Export as web page under File. Is there a way I can get that feature with a standalone disk?
After managing to set up OE-QuoteFix on his new PC, Ed reads a message
from Chicagogal <firstname.lastname@example.org>...
> I have the OEM version of Publisher 2002 and cannot find the Export
> as web page under File. Is there a way I can get that feature with a
> standalone disk?
The OEM version of Publisher is exactly the same as the release in every way
but the license, so the standalone version will be no differen...GP SP#2 hangs with sa and Collections Issue
I just installed 8.0 SP#2 (ran the script that it says to run cuz we had
upgraded from previous version to remove dups in smartlist tables) and when I
log into GP as sa, it hangs and CPU sits at 100%.
When I was able to log in previously to SP#2, I constantly received errors
about the CN_Collector_MAIN table with invalid column names etc. I've
deleted the table, then re-ran the create tables, but it keeps coming back
with this error. I've even gone into file > maintenance > sql and deleted
and recreated the table, but then get "number of results doesn't match ...Changing ip address of exchange server #2
I have a back-end server and a smtp server in DMZ.
I want to change ip address of back-end server. are there any issues?
all incoming and outgoing emails are going via smart host.
No issues at all as long as you remember to change all the references to
this server in your firewall, SMTP scanner etc.
"Jack Dorson" <JackDorson@discussions.microsoft.com> wrote in message
> I have a back-end server and a smtp server in DMZ.
> I want to change ip address of back-end server. are ...How can I print on 8 1/2"x17" paper?
I have cut down an 11x17 paper to 8 1/2" x 17". I cannot figure out how to
change the paper size to accept and print anything bigger than 14." any
suggestions would be greatly appreciated
First make the size settings in the Printer Setup. You may need to use the
"mickilena" <email@example.com> wrote in message
>I have cut down an 11x17 paper to 8 1/2" x 17". I cannot figure out how to
> change the paper size to accept a...Install that important pack from the Microsoft Corp.
Content-Type: multipart/related; boundary="vaccmkjzdr";
Content-Type: multipart/alternative; boundary="ggmepcujya"
this is the latest version of security update, the
"October 2003, Cumulative Patch" update which fixes
all known security vulnerabilities affecting
MS Internet Explorer, MS Outlook and MS Outlook Express.
Install now to help maintain the security of your computer
from these vulnera...ANN: Optimizing the Performance of Microsoft Dynamics CRM 3.0 white paper
the White Paper "Optimizing the Performance of Microsoft Dynamics CRM
3=2E0" is now available:
...Money Updates #2
Was wondering about money updates. What exactly is the program downloading
during the update process? And if the program is updated on a daily basis,
why would I ever need to upgrade to a newer version?
In microsoft.public.money, invalid wrote:
>Was wondering about money updates. What exactly is the program downloading
>during the update process? And if the program is updated on a daily basis,
>why would I ever need to upgrade to a newer version?
It is mainly changes in online bank setup.
Despite appearances is typically does not change anywhere daily.
"invalid" <...Can't create the item #2
I use Outlook from MS Office 2003 Business Edition.
Everything has worked fine until the past few days. Now,
whenever I click on an E-mail address link inside a
webpage, I get a message from Outlook that says "Can't
create the item."
One person on this group gave me the following advice:
>Close Outlook, find and rename the frmscache.dat to .old
I did searches on all my drives and the file named above
was not found. I doubled checked the search to confirm
that it included hidden files and system folders in the
search. Still no luck.
...Does POS 2.0 support price-embedded barcodes?
Does anyone know if Microsoft Point of Sale 2.0 supports price-embedded
barcodes (also known as random weight barcodes)?
I have Digi scales that print out 12-digit barcodes with UPC and price info.
I would like to implement POS and not RMS because it is much less complex.
Thanks for any info.
POS 2.0 does not support price-embedded barcodes.
> Does anyone know if Microsoft Point of Sale 2.0 supports price-embedded
> barcodes (also known as random weight barcodes)?
> I have Digi scales that print out 12-digit barcodes with UPC and price info.
&...when opening an excel file, 2 files open (one is book1)?
When I click on an excel file, 2 excel documents open up. One document is
called Book1 and the other document is the actual document that I want to
open. How do I stop this from happening?
To prevent Book1 from opening you can append /e to your shortcut for opening
"C:\PROGRAM FILES\MICROSOFT OFFICE\OFFICE\EXCEL.EXE" /e
Alternative to the above............
Go to Start>Settings>Folder>Options>File Types. Scroll down to MS Excel
Worksheet. Then if running Win98 OS Edit> select "Open" and Edit.
If using WinXP OS you would scroll down to...I Want a Warning Before Sending Email to Certain Contacts
Can someone tell me how to configure Outlook so that I will get a
warning message before sending email to certain contacts? For example,
I have certain contacts categorized as "adversary" or "client" and I
would like Outlook to make me confirm that I do, in fact, want to send
an email to anyone from those categories. The idea is to prevent
myself (and colleagues) from accidentally sending an internal email to
the wrong person because of Autocomplete, inadvertence, or some other
mistake. Thanks in advance. Extra points for a firm-wide
solution--something the s...IMAP address on exchange sever #2
how can I find the IMAP address of my exchange server?
I need help with the following:
I need to plot a 2-D column graph comparing the profit margin (y-axis)
for the 3 items (x-axis) for Malaysia and Singapore, using the data
Item Mfr's Agent's Retailer's Selling GST Profit Total
Cost Charge Markup Price Margin
Lipstick 9.85 15.76 12.81 38.42 1.54 27.03 105.40
Toner 11.90 19.04 15.47 46.41 1.86 32.65 127.33
Cleanser 15.90 25.44 20.67 62.01 2.48 43.63 170.13
Total 37.65 60.24 48.95 146.84 5.87 103.31 402.86
Item Mfr's Agent's Retailer's Selling GST...Report: Cell #1, Cell #2, Cell #3, Cell #4
I am stuck again and would love som help :(
I would like to repeat all words found inside ~25 cells, separated only
by ", ", ignoring empty cells.
A1: [Apple ]
A5: [Syrup ]
A6: [ ]
A7: [ ]
A8: [ ]
The result should be something like:
[Apple, Orange, Banana, Tomato, Syrup]
JemyM's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=26945
View this thread: http://www.excelforum.com/showthread.php?thre...Application icon #2
Have a strange problem. I recently used the tool ResOrg to renumber the
resource IDs in a project where there were hundreds of duplicates. This
fixed a list of bugs, which is why I did it. The other programmers found
three problems after this. One was trivial to fix, a second was actually a
problem in the code that renumbering the resouce IDs uncovered and was also
The third one is weird though. Renumbering the resources messed up the
application icon. I verified this by recompiling with the old resource.h
file and the icon is correct.
In the renumbere...