2007 ->Money+/update issues Part 1 adj Balance

Upgrade from Money 2007 – Money+

I have been having some bad issues the past few weeks and they are 
apparently getting worse. It started with the update that I believe happened 
just before Money+ came out .  After the update it added an “adj. Balance” 
column in the banking/account list tab. This adjusted balance is all over the 
place and even if I balance it out it goes out of whack right away. I use 
Citibank and have them do all my payments online so I don’t have to worry 
about adjusted balances because the bank balance is always right and I don’t 
write checks and use my debit card (has been a beautiful thing for the last 
year).

 Part of this problem is that money is duplicating transactions. Say I pay 
my mortgage on the 5th of August and it shows up as the 5th in money. Two 
weeks later it will add another entry for the 6th and if I get rid of one it 
comes back making my “adjusted balance” adjusted way incorrectly.   

My issue may not have anything to do with the adj. balance but is there any 
way to turn off the adjusted balance column? 
 
Is there a remedy to having payments show up multiple times instead of once? 
Is anyone else experiencing this?

I have more issues to follow that may be related.

Jeff

0
9/7/2007 2:52:01 AM
money 28651 articles. 7 followers. Follow

1 Replies
475 Views

Similar Articles

[PageSpeed] 44

In microsoft.public.money, Display_Name wrote:

>Upgrade from Money 2007 � Money+
>
>I have been having some bad issues the past few weeks and they are 
>apparently getting worse. It started with the update that I believe happened 
>just before Money+ came out .  After the update it added an �adj. Balance� 
>column in the banking/account list tab. This adjusted balance is all over the 
>place and even if I balance it out it goes out of whack right away. I use 
>Citibank and have them do all my payments online so I don�t have to worry 
>about adjusted balances because the bank balance is always right and I don�t 
>write checks and use my debit card (has been a beautiful thing for the last 
>year).

The "adjusted balance" on the Account List is the same as the Ending
Balance in the register. It would be the net sum of the transactions
in your register. If your transactions in the register are correct,
then the adjusted balance should be correct.

\
>
> Part of this problem is that money is duplicating transactions. Say I pay 
>my mortgage on the 5th of August and it shows up as the 5th in money. Two 
>weeks later it will add another entry for the 6th and if I get rid of one it 
>comes back making my �adjusted balance� adjusted way incorrectly.  

If you are using the Essentials register, I suggest you switch to
the Advanced register.
 
>
>My issue may not have anything to do with the adj. balance but is there any 
>way to turn off the adjusted balance column? 

On the account list, you could drag the column header separator to
the right, and make it pretty much disappear.

> 
>Is there a remedy to having payments show up multiple times instead of once? 
>Is anyone else experiencing this?
>
>I have more issues to follow that may be related.
0
via_newsgroup (13114)
9/7/2007 5:21:13 AM
Reply:

Similar Artilces:

=?ISO-8859-1?B?oA==?=
� ...

Outlook 2007: Can't accept proposed meeting times?
Does anyone know anything about this in 2007? Is it a bug or am I missing something? When I send an meeting request and the other receipient proposes a new time, I get a response back but there is no "accept" button. I have to manually update the meeting time. Setup: - both ends are OL2007 - both ends uses pst files - no exchange server involved - both ends connect to an IMAP server TIA 1001001100100 1001001100100 <ANonnyMoose@no-email.org> wrote: > Does anyone know anything about this in 2007? Is it a bug or am I > missing something? > > When I send an meeti...

Creating an email message in Outlook 2007
What does Outlook use as the editor when creating an email message, looks very much like Word. Options no longer offers Word as an alternative. Hello, yes, Outlook 2007 uses Word to render and create messages- There is no possibility to change anymore. Roman Brehm "PE" <pitsofearth@msn.com> wrote in message news:%23imSovkXHHA.4308@TK2MSFTNGP05.phx.gbl... > What does Outlook use as the editor when creating an email message, looks > very much like Word. Options no longer offers Word as an alternative. > > > > It is word. If you have the office suit...

Create More than 1 Return for Same Invoice !!!
Hello In version 10.0. The RMA can create more than 1 return for same sales invoice! Is there any possibility to disable this properties? I need to prohibit anyone to create more than 1 return for same invoice. Any suggest ? no, that cannot be disabled. Too many firms have more than one return per invoice and it is not an option -- Richard L. Whaley Author / Consultant / MVP Documentation for Software Users Get our Free Tips and Tricks Newsletter and check out our books at http://www.AccoladePublications.com "Monzer Osama" wrote: > Hello > In version 10.0. > The R...

OWA issues
We are running MSEX 5.5, NT4 SP6. Last night the system crashed and cameup with OWA not functioning. Event log shows the following errors: Error: File /exchange/USA/inbox/peerfldr.asp Unexpected error Error: File /exchange/USA/LogonFrm.asp Unexpected error An object call caused an exception. (IID: {51372AEF- CAE7-11CF-BE81-00AA00A2FA25}) (Method: 3) (Microsoft Transaction Server Internals Information: File: i:\viper\src\runtime\mtxex\activity.cpp, Line: 889) (Exception: C0000005) (Address: 0x77f64afa) ntdll!RtlAllocateHeap + 0x432 MSVCRT!malloc + 0xD2 MSVCRT!malloc + 0x26 ...

DPM 2007 and DVD recorders
I'm going to evaluate DPM 2007 but before I've a question: does DPM 2007 supports DVD recorders for permanent data archive ? Thanks in advance. F. On 22 Feb, 20:25, "Fab <fabrizio.nos...@nospam.nospam>" > I'm going to evaluate DPM 2007 but before I've a question: does DPM > 2007 supports DVD recorders for permanent data archive ? From the technet web site: "DPM does not support Write-Once Read-Many (WORM) media." Hope to be wrong... F. http://www.ss-infrastructure.com/2009/12/dpm-and-tapes-things-to-consider.html ...

Outlook 2007 install problem
when i tried to install outlook 2007 it hangs up and the end and will not complete. Task manager shows it running, but after 2 hours I ended the task. Now I can install or uninstall anything because I get a message that says something is installing and wait until it finishes. But, nothing is installing and Outlook 2007 does not show up on the program list. Help. If you are running an Anti-Virus program, like Norton or Trend, Turn it off while you do the install. Also, log out of any other programs that may be running. Are you using Microsoft XP as your processing system? Or maybe Vis...

Converting Office 2007 Pro Trial to Office 2007 Small Business
My Office 2007 Professional Trial just expired yesterday. I purchased the Office 2007 Small Business upgrade through the online store. When I tried to convert my trial to the "real" version, my product key wouldn't work. (I expected it to work for everything except Access, which is not included in the Small Business version.) I am, as we speak, downloading the Small Business version from the Microsoft store; but do I really need to go through an uninstall/reinstall? Can't I convert to another version of MS Office without reinstalling? I'm worried abo...

Excel 2007 VBA shape fill colour problem 02-11-10
I have a generic VBA routine that adds a specified shape to each cell within a target range on a worksheet and defines the Shape.Fill.ForeColor.SchemeColor property and the OnAction event. The OnAction event routine then toggles the Shape.Fill.Visible property on and off which should change the colour to the already defined Shape.Fill.ForeColor.SchemeColor property and back again, but the colour always defaults to turquoise rather than the colour I've specified. The code detailed below worked fine in Excel 2003, this appears to be a bug in 2007. --------------------------------...

Typing LAGS in Outlook 2007
New Dell Inspiron, Vista, OEM Office--the Outlook is lagging - every time I type or select anything there is a small delay. For a fast typist, this is disconcerting as I am a sentence ahead and nothing shows on the screen. Not happening in other word or text programs. I have a import .pst file that also says, it can't be accessed and it seems like it is looking all the time. I tried to delete it but it won't let me. Any help will be appreciated. Since its a Dell, it's probably Media Direct causing it: http://www.slipstick.com/problems/recurringmeetings.htm other causes: ht...

Is there a way to track quantities other than item type 1?
We're trying to come up with a better way to track component items v.s. sales inventory items in the inventory module. We sell manufacture and sell eletronic equipment. To simplify matters, say we sell pc's. So in our sales inventory we have pc100, pc200 and pc300 and we are tracking the quantities of these pc's we have on hand so they're set up as item type 1-Sales Inventory. To make the pc's we have components motherboard1, motherboard2, powersupply1, powersupply2, videocard1, videocard2, case1, case2, and case3. ( the only difference between pc200 and pc300 is ...

Upgrade from OA 2007 to MDGP 9
I have read on Microsoft's website that the transition from Office Accounting 2007 Professional to Microsoft Dynamics Great Plains is a rather simple migration; however, I cannot find one single document or whitepaper on the best practices or best methodology for facilitating such a move. Would someone point me in the correct direction? Out books are not that complicated; however, we are heavy into project accounting and would like to integrate our accounting package with CRM 3.0. We have an in-house IT staff that I am comfortable with performing the upgrade, but would like a clearer pict...

How do I design a DVD label from scratch in Word 2007?
I don't see a way to start a new DVD label in Word 2007 and was wondering if anyone knew how to set one up. The templates work fine but they take too long to change to what I want. Word is a very poor program for creating DVD labels (and you should not add labels to DVD discs because of out of balance effects at very high rotational speeds). However investigate Surething CD Labeler software. http://www.surething.com/ For DVD case labels, you could create a three cell table (front spine and back) or use the aforementioned product. -- <>>< ><<>...

PID for Outlook 2007 not recognized by Microsoft
Hi Office 2007 users I recently installed Office 2007 Pro (retail multi language from Amazon UK) as an upgrade to Office 2003 Pro (retail). I had some problems with Outlook 2007 and attempted to access the Microsoft Warranty Help. On the submission report I was required to insert the PID. I looked up the 2007 PID in Outlook and typed it in but it was rejected by Microsoft Help on the grounds that: "The PID you have given (characters had typed in repeated )is not the PID for the Office 2007 Multilanguage edition please insert the PID for Office 2007 Multilanguage edition." B...

Major Email Issue
Can someone explain to me why 2 identical email being sent out(1 from outlook and 1 from CRM with tracking tokens disabled) the 1 from outlook goes thru with no problems and the one from CRM does not? ...

Group Schedule Free/Busy issue
We are running Exchange 2003 with Outlook 2007. I have a group policy that sets user's Outlook to publish 6 months of Free/Busy info. If you use Group Schedules to view other user's calendars, you can not see the Free/Busy info. If you open their individual calendar then you can see everything. Exchange cached mode is not turned on. Any insight? ...

Disabling Office 2007 startup GUI
Is it possible to disable the first box that appears after I click on the ..exe for e.g Word? I'm referring to the yellow welcome box with the text 'Microsoft Office Word 2007' This is a Word for Mac group. Word 2007 is a program for Windows. Please don't post the same question in multiple newsgroups. It is already answered in microsoft.public.word.docmanagement. Yves "Abi" <Abi@discussions.microsoft.com> wrote in message news:460E7E7C-1D8D-4723-87DB-5E57671A3E4B@microsoft.com... > Is it possible to disable the first box that appears after...

GAL mail enabled user issue
Hello all, I'm running an Exchange Server 2000, with mostly Outlook 2000 clients. I seem to be having a problem getting the GAL to update properly. All the users I've added in the past 3 weeks don't show up. I've done a rebuild on both the Recipient Update Services, as well as the Default Offline Address List. If I right-click on either the Offline address book, or the Default GAL in Exchange System Manager, choose properties, and click the Preview button, the resulting list includes the users that are missing from the GAL in Outlook. I've checked the E...

One additional discovery relating to this issue.
One additional bit of info - on advice of my mentor, I ditched the lookups in the table - he indicated that might be an issue. I then made lookups in the form itself, and I can see the lists - no problem there. But I still can't add a record (same error messages as below) - UNTIL I uncheck "enforce referential integrity" on the relationship line between tblBusiness & tblContact. I wish I wish I wish I could enforce referential integrity. Ideas? yes, you made a very wise move in removing the Lookup from tblContacts (if you've any remaining doubt, see http://www....

Live Login Issues w/Plus Deluxe + HTTP 500 on moneycentral
System Info: MS Money Plus Deluxe version 17.0.120.1415 + IE7 + Charter Security Suite (F-Secure) + XP SP3 Past: I've been using this Money version for about a year and suddenly started having issues with logon. Symptoms: Sign in information cannot be verified. HTTP 500 on moneycentral.msn.com I have been having problems since 8/30. I'm about to draw the conclusion that this isn't related to Money but some setting buried in IE7. I'm extremely frustrated at this point. I have tried: Repairing my money file Removing my the association of my live password to the fi...

0 values further issue
Hi Guys I have used =IF(Original!C33="","",Original!C33) to avoid pulling 0 numbers across but I have come across a secondary problem where =IF(A33>0,VLOOKUP(A33,'New Labour Standards'!$B$6:$C$990,2,FALSE)," ") and other formula on the same row beggining with =IF(A33>0 are now displaying #n/a entries. I want these entries blank if a33 is blank Thanks Brian Change them to: =IF(OR(A33="",A33<=0),"",VLOOKUP(A33,'New Labour Standards'!$B$6:$C $990,2,FALSE)) Note that I have made it "" rather than " &q...

How do i make a variable part of a formula
Say I have some vba code that looks like: ActiveCell.Range("A1:B5").Select Selection.FormulaArray = _ "=LINEST(R[1]C[-3]:R[5]C[-3],R[1]C[-2]:R[5]C[2],TRUE,TRUE)" Let's say that I am looping over some variable i, and would someho like to insert that variable into the code: Selection.FormulaArray = _ "=LINEST(R[1]C[*i*]:R[5]C[*i+1 ],R[1]C[-2]:R[5]C[2],TRUE,TRUE)" Obviously, I can't simply insert the i's in there -- what instea should i do? thank -- Message posted from http://www.ExcelForum.com Selection.FormulaArray = _ "=LINEST(R[1]C["...

Installation of CRM v3.0c fails with Outlook 2007 #2
There is this thread, which I wish to reply to but don't know how. Thread URL: http://groups.google.com.my/group/microsoft.public.crm/browse_thread/thread/9a8dd21187c63f8f/70ec92d8b2203f30?hl=en&lnk=st&q=The+installed+version+of+Microsoft+Outlook+is+not+supported+by+the+Microsoft+CRM+client.+Please+upgrade+to+the+current+release+of+Microsoft+Office+Outlook.#70ec92d8b2203f30 Please see my solution at: http://zenetlife.blogspot.com/2008/01/installing-ms-dynamics-crm-client-v3c.html Hope this is useful. Regards, Eunice Hmmnnn - unfortunately, the conclusion in your blog is inco...

Directory Issues 2003: Merge file, Header and Footer,
Hello, After I have merged my pubication, Merged File Issue: After I have merged my file, where I would like to start my header and footer prevents me from doing so, because the name is in the middle of the page along with other data. Please advise Header and Footer: I can't get the header not to be on a single page -- astro44 Jessica, Are you using the catalog merge? What are you trying to do with the header and footer? When you are finished with the merge, in step five create a new publication with the merge. If your merge was setup as a catalog, you now can view the header...

office 2004 (excel & word) afp file path issue on tiger server (10.4.9)
g'day, we have just changed over to an xserve (running 10.4.9, HFS+ with ACLs) and are experiencing the following problem with office 2004 excel & word files only - surprisingly powerpoint files are not affected: all excel and word files without spaces in either file- path or -name open just fine, however all files with spaces in file-path or -name generate the following error message... <img src="http://homepage.mac.com/daniel.schagemann/posts/EXCEL_1.png" alt="excel error message" /> for the above we used the following example file: -rwxr--r-- 1 daniel...