Slow responce of cash drawer OR printer error
Hi every one.
Some time the cash drawer response is very slow.
Sometimes the cash drawer opens, but the receipt doesn't print. The
computer searches for a while and then at the end it displays an error
I have TM88IV & APG Cash Drawer, using OPOS driver, using Microsoft RMS 2.0
with Windows Vista.
if any body have some idea please help me
Thanks in advance
I have the same experience but with a SureMark 4610 - TF6
"Akbar Mian" <AkbarMian@discussions.microsoft.com> wrote in message
news:22EF9D16-A753-4FEF-A199-A232F571EFFD@microsoft...Foreground locking error running scheduled integration
I have a scheduled integration setup that first runs the login to GP, then an
integration group (2 AR integrations). I have them set at 5 minutes apart.
The TK article for this particular error says that the error is because
"Great Plains is still in the process of launching when the Integration
Manager starts running." I then increased the time to 15 minutes
apart and finally at 30 minutes apart, but the first record of both
integrations still fails with this error "could not set foreground locking
value to 0."
How can I get rid of this error? It only takes les...Error 1100009
After pushing out SP2, I've got about 700 Vista machines that are throwing an
error "Publisher cannot open the file." when trying to open Publisher
documents. Ctrl+Shift+I gives error 1100009
Any solutions other than removing Office and reinstalling without SP2 on 700
Patrick S wrote:
> After pushing out SP2, I've got about 700 Vista machines that are throwing an
> error "Publisher cannot open the file." when trying to open Publisher
> documents. Ctrl+Shift+I gives error 1100009
> Any solutions other than removing Office and reinsta...OWA 302 error for inbox
I have two 2003 (sp2) front-end servers that are in DMZ. We have had this
problem even before installing sp2. We use Network Load Balancing.
After login, during OWA tries to display Inbox, I get login screen on right
pane, prompting me to enter user id and pwd. In IIS Logs I see 302 error in
logs when accessing frontend-02 (please see below the comparision between
frontend-01 and 02 ; frontend-01 is working server).
Secondly, I notice in the logs, on frontend-02, under cs-username field,
there is '-', whereas on 01 server i see the username, henry. Any reason wy?
To view prop...Exchange OMA error message. Please read...
When our i-700's with Pocket PC 2003 attempts to access our mail exchange
server, all we receive is the following error message:
" A System error has occurred while processing your request. Please try
again. If the problem persists, contact your administrator.
mail.domain.com/exchange works fine though. We've installed the service
pack 1 for exchange 2003 to attempt to fix this issue and are having the same
results. Does anyone care to share how they may have overcome this exchange
problem with their compatible PDAs and Exchange's OMA (Outlook Mobile Access...Third request for help with Payables Error message!
Ok I have posted this for the third time with no response! I need help
to know if there is any kind of issue on the back end of our
environment. If someone could help it would be greatly appreciated!
We are currently running GP 10 SP1 and apparently since version 8 (we
did not upgrade to 9) there has been the following error message
launching a transaction out of Smartlist, when we go to inquiry for
AP documents, and drill down of PMTRX & PMCHK from the JE inquiry
Unhandeled Script Exception:
Index 0 array of 'PM_Transaction_Inquiry_Fill' Script terminated
We ran a ...Amazing Problem in AllocPhysMem wince 6.0
I am writing a Port Driver for x86 platform in WinCE 6.0. I want to
allocate virtual and equivalent physical memory in driver and mapped
it to USER mode to use application. For that I used AllocPhysMem in
driver and passed that
address through IOCTL calls but i cant use that virtual and physical
address in application side. Because AllocPhysMem returns Error Code
as 0x57 (meaning Parameter incorrect).
But the same code is working in WinCe 5.0.
My code snippet is,
VirAddress = (LPVOID)AllocPhysMem(32,
...Creating a CFormView application produces errors
Using Visual Studio.Net 2003 I have created a C++ MFC application with Single
Document Interface and Document/View support, and have changed the base class
for the derived View class to CFormView. All other settings are their
When I compile the source code generated, I get an error stating that the
base class CRichEditCntrItem is undefined in the declaration of the
CRichEditCntrItem derived class.
According to the Help, CRichEditCntrItem requires the header afxrich.h
If I add this include into the stdafx.H file and recompile, I get a syntax
error in the constructor for the CRic...Should unimplmented pure function throw a compile error?
It's been a while since I have written anything with abstract classes.
If I derive a class from my abstract class and do not implement a pure
virtual function of the base class in the derived class, shouldn't the
compiler throw an error?
Bruce E. Stemplewski
GarXface OCX and C++ Class Library for the Garmin GPS
yes, if you try to instantiate the class in your code it should.
"Bruce E. Stemplewski " <BruceStemplewski@hotmail.com> wrote in message
> It's been a while since I have written anyt...getting the error when updating file xls file.
We are using exchange 2003 server and office XP but know we start to
Upgrade our office to office 2003 Know we are face problem. When our user try
to make changes to file in public folder there can not make the changes it
say “file is read only” but that user can make the changes or edit that same
file from the P.C were office XP is installed.
Do I have to install some patch if yes can you please send that
patch because in trying from last two day and I can not find it.
Note: If possible can you reply on firstname.lastname@example.org
Just a guess...
Are you s...Term ID Error
Ok, for the last week, I have been trying to get my PinPad (Verifone 1000se)
to work. I have done all of the test and the issue seems to be when it goes
out and gets the authorization, I get the Status as FAILED and Result 3: Term
I have contacted both Paymentech and Vital and they both tell me that things
are correct on their end. Paymentech is the one that sent me the PinPad and
was supposed to be injected.
What else could be the issue?
What did Vital say when you told them that error message? Sounds like one
of the two of you have the wrong Terminal ID #.
...Spontaneous 'Compile Error' In Queries
I've got a half-dozen queries that contain this expression:
Haven't touched any of them, but suddenly they were all throwing
"Compile error. in query expression 'IssuerName:
tblIssuer.IssuerID is still there in a link.
My kneejerk was to somehow force recompiles of all the queries,
so I did a Compact/Repair.
After the compact/repair, all was well: the errors went away.
C...Payables Transaction Edit List
Our customer had the following error print on the Payables Transaction Edit
List: **ERROR: One of more landed costs need to be apportioned.Document
Total. This prevented the user from posting the batch. The batch went into
However, the error message did not appear when logged in as 'sa' and 'sa'
was able to post the batch. This customer does not even own the landed cost
module. Plus, this was an A/P invoice, not a POP invoice. Why was this
...receiving email with paper clip symbol
Whenever I get an email with the paper clip symbol I
cant' open the attachment. It reads, "OE removed access
to the following unsafe attachments in your mail:" I'm
quite sure that all received attachments are not
unsafe.... This Compaq computer and XP software is only
3 wks old. I'm not computer savvy!!! Where does the
Try this site for information on removing the block:
A good website for information on OE is:
This is a group to support Outlook from the Office group of pro...Exchange error
for one week now, my exchange 2000 server crashes nearly every night at
random time, the only solution to have it all restart is to restart the
In the application log, multiple error events are reported like these :
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1000
User: NT AUTHORITY\SYSTEM
Windows cannot establish a connection to *domain name* with (1364).
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1000
User: ...Pub98 +WEBBBOT-SELF 404 error
This is a multi-part message in MIME format.
Just published a web site-using publisher 98. I have to say the results =
are pretty good and I found it fast and easy to use. One BIG problem!!..
I have included a simple reply form and when SUBMIT is pressed I get the =
404 page not found -WEBBOT-SELF-error. I know the problem is down to =
FrontPage extensions, but how do I fix the fault.=20
Why does this return an error?
Dim Unknown As Range
Unknown = Range("K24")
Range is an object and so you need to use the Set Statement which assigns an
object reference to a variable or property. Refer help on Set statement....
Dim rngTemp As Range
Set rngTemp = Range("K24")
'will refer to the activesheet cell K24
> Why does this return an error?
> Dim Unknown As Range
> Unknown = Range("K24")
Thanks I never know where to look in help. I think Help is...Exchange error: 0x8004050a
When accessing an exchange server via mozilla or dtmail on a solaris
machine, I get this error: 0x8004050a. The text is "unrecognized
internal error". In mozilla, it gives me this error but fetches the
mail anyway. dtmail simply doesnt work at all. If I switch to a W2K
machine on the same network, outlook works just fine.
Does anyone know what this error means? How can it be fixed? It just
"started" one day...
Check this out...
> When accessing an exchange server via mozi...Setting up Exchange 2003
I had this problem the other day while extending the schema in
preparation for an upgrade to Exchange 2003. I searched through a lot
of databases and search engines, and found that a lot of people have
had this problem, but none of the forums led to a clear cut answer to
the issue. So, I thought I'd share my solution to try and help others
out, and save them some time and frustration. I was ready to call
Microsoft support right before I figured this out.
While running forest prep (setup /forestprep), setup failed with Error
code 0XC103798A. It then specified to check the Exchange inst...Can decimal point symbol (.) be removed on a Report?
Is there a way in Report Writer to modify a currency field so that it does
not show the decimal point symbol (.) - a period, but still shows the 2
For example, the field I am trying to modify is Check Amount.
Say I have a check for $271.29, I want to format the field so that the
outcome is 27129, in other words I don't want the dot/period in between the
dollars and the cents.
Is this possible to do? If so how can I modify field to display this way?
P.S. I don't need the dollar sign either.
easiest way would be to use the value in a calculated field with result ...SLbuild.dic Error on Startup
We are running GP Ver 7.5 SP 5. I recently loaded a new client workstation
all went well witht the exception that every time this person starts GP, he
gets an error "Can Not find Slbuild.dic", he can click OK and carry on as
normal. This is more of a nuisance error than anything. Does anyone have any
idea as to what may cause this and how to get rid of it???
Potawatomi Bingo Casino
As you seem to only get this on startup, my guess is that the dynamics.set
file is slightly "messed up". Meaning that somehow and for some reason...time.h :Linking errors
I have an application where I am using the function like time(),gmtime()
from time.h.My code compiles but I get linking errors. So Could you please
tell which library needs to be included for time.h?
Thanks in advance.
See the response to this exact same question that you asked yesterday
Bruce Eitman (eMVP)
Bruce.Eitman AT Eurotech DOT com
My BLOG http://geekswithblogs.net/bruceeitman
"hari" <email@example.com> wrote in message
news:11A4458D-67B1-49A9-B371-56A084A...error code 0x800703EE
I received error code 0x800703EE when trying to install SP2 for vista-32bit
OS. any help with this error code would be appreciated.
System could not allocate the required space in a registry log;
The volume for a file has been externally altered so that the opened
file is no longer valid.
How to obtain the latest version of the Windows Update Agent [v7.4.7600.226]
to help manage updates on a computer:
I'm suяe someone else will help you if this suggestion doesn't help.
...Re: too long execution time and access violation error
Oh ... and one more thing ... is CPlex one of your classes? If it is here's
the problem ...
CPlex::FreeDataChain() line 45 + 15 bytes
It appears it's doing a delete that is causing the access violation.
"KS" <firstname.lastname@example.org> wrote in message news:...
> The reason why it's taking 55 seconds is because you're running the
> application in debug. When running in debug, MFC has A LOT of overhead if
> you're doing a lot of new's or a lot of delete's. This is a because MFC
> does a lot of error checking to make sure you're not deletin...granting users Send as permissions causes errors unless they select the FROM address from the GAL
I've got some users who have two mailboxes, each with a different
address. They need to be able to select which address they send from,
I've given them "send on behalf" and "send as" permissions the 2nd
accounts. But, unless they select the FROM address from the GAL, they
get the following error:
You do not have permission to send to this recipient.
If they manually type in the address, they receive this error. This is
only a problem because I would prefer to hide the 2nd account from the
GAL, to avoid confusion.
Does anyone know a way around this?...