Project Returns w non-inventory

Currently when you enter a return (with or without credit) for a purchase, 
non-inventory cost category, when you get to the item field if you don't type 
in the item you purchased exactly as you typed it in when you originally 
purchased it, it will not let you proceed.  Because it is non-inventory the 
lookup cannot be used and you are unable to just move to the receipt number 
field to look at past receipts and select one for return.

This seems overly cumbersome and my suggestion is to either allow them to 
lookup past receipts without the item field being filled in OR allow a lookup 
of non-inventory purchases in their history.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the 
suggestions with the most votes. To vote for this suggestion, click the "I 
Agree" button in the message pane. If you do not see the button, follow this 
link to open the suggestion in the Microsoft Web-based Newsreader and then 
click "I Agree" in the message pane.

http://www.microsoft.com/Businesssolutions/Community/NewsGroups/dgbrowser/en-us/default.mspx?mid=334762cd-e1aa-4637-82e2-3f5697b9b076&dg=microsoft.public.greatplains
0
JenKuntz (14)
3/1/2007 6:36:43 PM
greatplains 29623 articles. 6 followers. Follow

0 Replies
452 Views

Similar Articles

[PageSpeed] 23

Reply:

Similar Artilces:

create chart from non adjacent range
I need to know how to do this Select one area, then hold CTRL while selecting the next area, etc. Then run the Chart Wizard as usual. - Jon ------- Jon Peltier, Microsoft Excel MVP Tutorials and Custom Solutions http://PeltierTech.com _______ "rita" <rita@discussions.microsoft.com> wrote in message news:18C9672C-0EAB-401C-8798-4C51158EAF8B@microsoft.com... >I need to know how to do this ...

non latin characters in nvarchar
Hi NG, is there a way to select nvarchar fields, that have non latin characters ? Do I have to use UNICODE() and search for high numbers ? Regards Volker Jordan Volker Jordan (v_jordan@web.de) writes: > is there a way to select nvarchar fields, that have non latin characters ? > > Do I have to use UNICODE() and search for high numbers ? That or an expression with patindex: SELECT ... FROM tbl WHERE patindex('%[' + nchar(nnn) + '-' + nchar(65535) + ']%', col COLLATE Latin1_General_BIN2) This assumes that there i...

Task w/ Multiple Resource
I have a task that requires two resources to work concurrently. It is a series of presentations that need to occur within a single span of five days. Both resources must be available to attend each and every presentation within that 5 day period. There is work that must be complete prior to presentations, therefore this task has a predecessor. It so happens that one of the resources that must perform the task is away on vacation when the predecessor finishes. Even though the vacation is entered as an exception in the calendar of the resource, MS Project still schedules the pr...

Obsolete / inactive items available to sales / inventory processin
Hi all, Does anyone know of a way to disallow obsolete/inactive items from being available for selection on sales orders? Thanks, -- Jim Bourque Two steps: first, in Setup->Sales->Sales Order Processing->Options, uncheck the option to allow sale of discontinued items. Second, mark those items Discontinued in the Item Card. -- Richard L. Whaley Author / Consultant / MVP Documentation for Software Users For help learning and better using Dynamics GP,... check out our books at http://www.AccoladePublications.com "Jim B" wrote: > Hi all, > > Does anyo...

Project...
Hi All, I am working on a project to develop a live form on the network. Basically it's for comunications between the depts. What I'm trying to do is have a form to enter what the depts. are producing now and a sub form that would display the info. after it's been entered. it did work fine when I go from the main form to the sub form, but then when I go back the the main form to update info, it crashes. I used stream reader in the sub form to display the info and stream writer for the main form to enter info. so the problem or question is can I have a file ...

Return to Column A #2
There was a post almost a month ago on this subject. The question posed was a good one though the answers returned didn't really answer the need. It's easy to move to the right on enter but how do you move to the next row and first column if you are at the end of the first row. Yes one can hit down arrow/home or Home/down arrow but this is a little annoying. If a sheet is protected and cells are locked, isn't there an easier way to do this more elegantly? Thanks in advance for your thoughts, Greg Say you start with A1 selected. Type something in A1 and hit the Tab key...

Exchange 2003 OWA issue w/embedded URLs
I'm running Exchange 2003 in a front-end/back-end configuration, and for the most part OWA works just fine. I have IIS configured so that users don't need to type in the domain name when they login, and that works. However if a user clicks a URL in a message, the authentication box pops up, asking them to re-authenticate. The box will NOT accept the username and password combination unless the user specifies domain/username. I guess there are two issues here, one why is it even prompting for re-authentication, and two why won't it accept the "normal" combination of usern...

different versions
I created a calendar @ work with a higher version of Publisher. I am trying to access the file @ home, but I have 2000 and it says it can't open it. What can I do? You will have to save the calendar at work as a Publisher 2000 document. -- Mary Sauer http://msauer.mvps.org/ "jabrjawz" <jabrjawz@discussions.microsoft.com> wrote in message news:57F19583-7E3D-4EF3-B384-ABDA85A33AF6@microsoft.com... >I created a calendar @ work with a higher version of Publisher. I am trying > to access the file @ home, but I have 2000 and it says it can't open it. > What...

554 error client host rejected wrong mail relay using Exchange 2003 /w SP2
I seem to be getting this error on a few domains that I'm sending mail to. We are using Windows 2003 /w Exchange 2003 SP2. Any idea's? Is this caused by a external DNS issue on the A or PTR record? Or... In external DNS we have our email server setup as mail2.abc.com but within Exchange we have our email server setup as mail1.abc.com would this be causing the issue? The following recipient(s) could not be reached: john@abc.com on 21/04/2006 9:54 AM There was a SMTP communication problem with the recipient's email server. Please contact your system ad...

Email from non-CRM contact
I am getting ready to start customizing CRM for a Service implementation. The majority of support requests will come via email queues. Users will then convert to a case. About 80% of the emails will come from CRM contacts. The other 20% will come from non-CRM contacts. What is the best way to manage these emails? IE: do we have to create a CRM contact before creating the case? If not, can we just associate the case to the Account and list the originating email address directly on the case form? How are other people handling this scenario? ...

(Advance Programming) Parameter Returned as Value
Hi, I wish some body could Help Me, I have being loocking for a solution for 2 days. I need to make a simple Query to check if the parameter values are in a Table. I want the Query to return "Founds" and "Not Founds". For Example: Table Definition: TName CREATE TABLE [dbo].[TName] ( [IdName] [bigint] IDENTITY (0, 1) NOT NULL , [Name] [nvarchar] (30) COLLATE Traditional_Spanish_CI_AS NOT NULL ) ON [PRIMARY] Values: Insert Into TName (Name) Values ('Paul') Insert Into TName (Name) Values ('Peter') Insert Into TName (Name) Valu...

HTML Project 4 School
I'm working on an HTML Project at school for my Computer Applications 1 Class, and one of the assignments is to join a newsgroup. So I'm completing my assignment.The computer won't let me view the other messages posted; therefore I can't respond to any of them. So basically I have nothing to say except that I'm trying to complete my assignment ...

Enter key will no longer return to begining of next row
From one worksheet to the next, the enter key will only activate the cell directly below the current cell. What Have I done to change the direction? Have checked the direction selection in Options and as suggested by MS Help made sure the Down was selected. Doesn't change a thing. Help! Sandy look in Tools | Options | and on the Edit tab check what's in "Move selection after Enter" Regards Trevor "Sandy" <anonymous@discussions.microsoft.com> wrote in message news:212b01c3e06b$ac7afe50$a401280a@phx.gbl... > From one worksheet to the next, the ent...

Doesn't find files w/spaces in name
There are a lot of folders and Excel spreadsheets on our shared drive that I need to open. Most of the folders and file names are named like: get reports\reports sep 2004.xls When I try to open one, Excel doesn't find it and I think it's because there are spaces in the folder names and/or file names. Is there a setting in Excel that will help me get around this? This was working until I had a glitch in Excel and the technician fixed the glitch and this problem appeared. Any help would be appreciated. I found an answer and so far it works. "C:/program files/microsoft off...

Calculate the total overlapping time of multiple tasks, excluding non-working times
I am developing a tracking calculator for an overall process. Within the overall process, there are 3 steps which are completed. These steps can be completed independently from one another, but can also (sometimes) overlap. I am trying to determine the total time for the overall process (from beginning to end), without counting the duplicated times where the steps are running parallel to one another, or times when some steps may be completed and are waiting for another to start. I have outlined the basic design of the worksheet below, with times in mm/dd/yyyy hh:mm format. S...

Project Manager 2007 queries
I am considering purchasing Proect Manager for my my Planner, we are a small office who a familiar with the basics but have a few queries which are a little more detailed, I hope someone may able to advise on:- 1. Reporting - What are the options for importing and exporting documents and the number of format types, are they clear and easy to learn and use ? 2. Graphs - Is graphical data readily available, are there differing options of graphs and are the tools for producing them clear and easy to use ? 3. Sand pits - Are there areas where 'offline' working is availabl...

Returned error.
The error message is: 551 Command RCPT User not local and relaying not permitted from you The computer with Outlook is going through a Win2K router. Does anyone no if I need to change any settings on the router or is there a setting in Outlook that I need to make. ...

Control the day & time in project accounting ( timesheet & equip.
We need to control the time sheet in project accounting as follows: No same time should be allowed to be entered on the timesheet & equipment log for the same project & cost category. In addition, the times should be controlled in way not to allow an employee to work on 2 or 3 projects at the same date & time. In addition, no equipment should be to work in 2 or more projects at the same date & time Thank you -- Joseph Abou Nader MCSA MCBMS Specialist ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes....

Return only the numbers contained in a field
Hello, I would like some help please building a query that will return the numbers only contained in a field: Table "PurchaseOrder" has a "Memo" field that usually has the following data: "Sales Order 7540:" or "Sales Order 34:". How can I create a query that will show me all the Sales Orders and their linked Purchase Orders (PurchaseOrder.RefNumber) where the SalesOrder.RefNumber equals only the numbers in PurchaseOrder.Memo field? Thanks in advance, Brett Welllll. You can but it might not be pretty, accurate, or fast. Actually I'd expect ugly...

Beta MS Project 2010
Hello, When will be MS Project 2010 Full version Available? When can this version expected to release?. Now MS project Beta is avail for download. Is there any DVD or CD avail for order this beta version MS Project 2010. Thanks This is a multi-part message in MIME format. ------=_NextPart_000_0085_01CACB39.AC9B1720 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Hi Karthick, The beta download site is here: = http://www.microsoft.com/project/2010/en/us/default.aspx=20 Retail versions should be available in June...

Notification about mails for non exists users
I am using exchange 2003. Is there a way be notify when an email was sent to my server for a user that does not exists? I would like to get Email notification for that or to be able to see it on the logs. Thanks ra294@hotmail.com HOW TO: Forward Mail with Unresolved Recipients to a Single Mailbox http://support.microsoft.com/?id=315631 That is the easiest way - then you could see the mail and handle it. -- Hope that helps, Dan Townsend This posting is provided "AS IS" with no warranties, and confers no rights. Please do not send email to this address, post a reply to this n...

Socket probem,GetLastError returns 10038 (Invalid socket handle)
hi all I am implementing SMTP protocol in MFC using Sockets. I am using the CSMTPConnection v1.36 code provided by PJ Naughter at http://www.codeproject.com/internet/csmtpconn.asp The problem is while sending mails sometimes mails are not sent. 1)I am connecting ,sending mail and then disconnecting. The above step is repeated 6 times hence 6 mails should be sent.Sometimes only 4 or 5 mails are sent.But sometimes all 6 mails are sent!!! The problem seems to be while Sending the MAIL command in SendMessage()function The return value of GetLastError() was 10038 i.e Socket operation on ...

Saving Selected Cells to a Text File w/o using a VBA script
I am trying to save only a range of cells in a worksheet to a tab-delimited text file. I have seen entries posted in this discussion group and have implemented a VBA script (based on some recommnedations posted) that does what I need to do. But my question is: Is there a way to save only a selected portion of a worksheet within a workbook to a text file? (i.e., NOT the entire worksheet, just a selection of cells). Thanks for any help you can give. Hi without VBA not possible -- Regards Frank Kabel Frankfurt, Germany "patm" <patm@discussions.microsoft.com> schrieb im...

make a text box visible and non visible
Hi there, Hopefully, someone can help me with this. Is there a way of making a text box visible through a if then statement on a form if it meets a certain condition. ( using Control Sources function on the property box) for example. Make the text box visible if not equal to zero else change the visible property to not being visible. Or is there another way of accomplishing the same thing using the property box conditions or something else I hope this makes sense. Thanks What you want to do is easy enough, but how will you get data into the text box? Based on your descripton, I ...

me w/CERTIFICATE -Digital ID still blocked.
me add signed/approved CERTIFICATE and it show. me at Windows Mail/Tools/Internet Accounts/(*select account)/Poperties/Security/Signing Certificate/Select/(*Select Certificate)/Encrypting Preferences/Select/???/Select Default Account Digital ID/???(only "Cancel" depresion is available [because no CERTIFICATE DISPLAY]). the Algorithm/3DES. me problem lies at the ??? of the formula. me can-not cee now to aplies ze CERTIFICATE to Email Account Setting. ya\ *=item(s) r available. ty 4 yur replies. $$$ $$$ -- UNIVERSAL RULER; OWNER FEDERAL GOVERNMET; GOD OF UNITED STATES;...