Saving Graphics in Outlook 2000
I belong to a graphics group and from time to time would like to save
graphics that come in email. When I right click>save picture as> I get a
..bmp option to save and would prefer to save as either a jpg or a gif. If I
manually type in .gif, I loose the animation. Is it possible to save a
graphic in the format that it was inserted in the email?
Thanks for the help.
I have exactly the same problem with Outlook. AND deleting the "ofline
content" does not work at all. Can anyone help on this one.
~~ Message posted from htt...Income & Expenses Report
I am confused by the Transfers at the end of the Income & Expenses report.
It seems to double count on the bottom line.
If I purchase $1000 in stock from my savings, the transfer shows a -$1000
(negative because I have taken $1000 out of my cash and transfered it to an
If I sell that stock for $1500. My report shows $500 capital gain in
income, and a positive tranfers of $1500 (positive because I have transfered
the money back into my cash). However these are added and thus shows a
positive $2000 on the bottom line. It doubled the bottom line impact of the
What kinda reporting software out there that people are using? I would like
to be able to see who is sending/recieving the most mail internally and to
the internet. I also would like to be able to see how much mail is being
sent to my distribution lists. I am looking at a couple different products I
found on msexchange.org's website but any info/advice would be appreciated.
Thanks in advance.
On Mon, 28 Feb 2005 08:49:25 -0600, "JasonMeyer"
>What kinda reporting software out there that people are using? I woul...Sums and percentages in reports
I have the following field in report's detail area:
(where 1 refers to a row of a table's dropdown)
at the report footer I have the following sum for that column:
with the Runnin Sum - Over All.
The calculation comes out correc so I'm assuming the formulas are correct.
However, when I try to get a Percentage by deviding the field formula with
the footer formula I don't get the correct answer. Can someone help me with
You have told us what you attempted but it isn't clear what you want to
accomplish. Your expres...Report Setup
Hi! I'm trying to create an Access report that looks much like a mail
merge. I've got a letter that needs to go to school districts (one
letter per district) that lists the schools in the district. The
report will also contain mailing data - district name, administrator
name, and address - while later in the letter it will list the county
the district is in, the school district and the respective schools.
I'm having trouble getting the sorting right so that I only get one
letter per district regardless of the number of schools in the
district. Any thoughts?
On ...Parameterized Report
Does anyone know how to send parameter eg. invoiceid to
the custom report in MSCRM?
I want to be able to display crystal report of a selected
invoice by clicking a button in the CRM toolbar.
Any help is greately appreciated. Thanks in advance.
...graphic signature #2
Does anyone know of a script for adding a graphic image as a default
Charles <email@example.com> wrote:
> Does anyone know of a script for adding a graphic image as a default
Just include the graphic in your signature file. See if this helps:
I too am having difficulty with this task. Have you had any success?
I have done everything described in demo's, confirmed proper settings in
Outlook etc. and it still does not display the graphic. Only that good ol'
"red X"...Linking queries on a report
I built a number of queries that all tie to the same table. Each query
sorts the data differently, but comes from the same data source. I would
like to show the results of these queries on the same report, but I get and
error message that the wizard can't connect the queries. How can I display
multiple queries on the same report. I've tried subreports, but they don't
seem to export as well. Thanks
What does "export" have to do with this?
If I have multiple sets of results I want to show in one place, I create an
empty "main"...Code Comment Web Report,
I have enabled VC++ XML comments in Visual Studio 2005. However, I do not
see the "Build Comment Web Pages" under the Tools file menu (which my book
says should be there--but the book was written for VS02). Did they get rid
of Build Comment Web Pages in VS05, or simply move it?
> I have enabled VC++ XML comments in Visual Studio 2005. However, I do not
> see the "Build Comment Web Pages" under the Tools file menu (which my book
> says should be there--but the book was written for VS02). Did they get rid
> of Build Comment Web Pages in VS05, or simply ...Customer Statement Crystal Report
Does anyone have a Customer Statement in Crystal format?
Your question is very generic. If you could be a little more precise, then I
might have what you need.
> Does anyone have a Customer Statement in Crystal format?
> Marisol Mortera
I am trying to build a crystal report for customer statements as well. The
Great Plains one is very difficult to work with. If you have an example of
this report in crystal, please email it at firstname.lastname@example.org
&quo...Kits in Sales Report
Is there a way for a kit to be broke out on the detailed sales report to
refect the items that were sold instead of the acual kit?
I hate to open a can of worms here, but you could do it by changing the query
in the report (Sales - Detailed Sales Report.qrp, I believe) and then you can
alter the columns to reflect the new query.
JR Data Inc.
> Is there a way for a kit to be broke out on the detailed sales report to
> refect the items that were sold instead of the acual kit?
did you find a way to list kit sales details?
Lasting...Modified Reports Fonts
We are running Great Plains 7.5 on Terminal Server 2000 and on client PCs
running Windows XP Pro. From a Terminal Server install, user A has been
printing a modified report (cash requirments) for a couple years with a
readable font. Recently we installed GP on her local machine. Now when she
prints, the font is somewhat readable but noticably different then the
terminal server GP. She is using the same printer and print drivers from
both locations. User B prints the same modified report from terminal server
and from a local install and prints to the same printer as user A, but has ...Report Asking For a Parameter
So I had a report that called with its Record Source set to TableA.
I then made a copy of this report, but change the Record Source to TableB.
TableB is a summary of TableA, and is missing one field, NAME
So when I run my report, it pops up asking for the paramater for NAME. I
looked at the report and deleted the feild that was linked to NAME. The
report is still asking for NAME, even though no feilds on the report ask for
it now. How do I go about fixing this?
On Mon, 3 Mar 2008 15:19:03 -0700, "James" <email@example.com> wrote:
NAME (which by the way is a Reserved Wor...FRx errors with emailing reports
A customer is receiving error messages when emailing FRx reports - they
don't seem to affect anything, the reports are sent and received via email
and FRx doesn't close but with every report that they send, they get the same
message. "Drill Down Viewer has encountered a problem and needs to close. We
are sorry for the inconvenience." DrillDown Viewer closes, FRx remains open.
We have checked all of the settings to enable email, everything seems to
be OK and the reports do get sent, just an annoyance having the message pop
up every time. Has anyone seen this before...Report Total Broker Commissions for year
I can't seem to figure out how to get a report on my investments with a
broker how much I paid them in commissions for the year. I entered the
commission with each buy or sell transaction from the confirmation statement
from the broker so I know the data is there.
In microsoft.public.money, Betty wrote:
>I can't seem to figure out how to get a report on my investments with a
>broker how much I paid them in commissions for the year. I entered the
>commission with each buy or sell transaction from the confirmation statement
>from the broker s...Calculating dates & creating reports
I need to design a database that will calculate due dates for evaluations.
It will have 5 dates. 4 are calculated. These dates need to be on a form
along with the employee's name and other vital info. The user should be able
to enter that Start Date and have all the other dates calculate
automatically. There are approximately 55 employees! The first date (Start
Date) is entered by the user.
User enters Start Date: 2/01/07.
#2 Next Date is 91 days from 2/1/07, which calculates to 5/03/07.
#3 Six Month Date is 182 days from Start Date, which calculates
to 8/02...Shrinking font in Report Text Box
I have strings of varying length that I need to display in the same text box,
so I would like to be able to shrink the text if it would otherwise be
truncated. I've read other, similar posts but still have a question. It
seems that Lebans AutoSizeFont is the right module for me to download
(http://www.lebans.com/autosizefont.htm), but having done that, I'm not sure
how to "apply" it to the text box in question. I've got no experience using
modules. Could someone walk me through it?
>I have strings of varying length that I need to...Printing only a disclaimer on the even pages of a report
I have a report that must have a disclaimer on the back of each page (no
data just verbage). Can someone tell me how to set this up please.
TIA for the help.
...Michigan Wage Report
Is it possible to create the Michigan Quarterly Wage for electronic filing in
GP 9.0? I am going to write a app in MS Access to create it, but wanted to
check if it is available elsewhere.
...Cannot export to Excel in Crystal report (cr8)
I have an application written in vb6 and uses cr8 Crystal report. In the
past, the end users were able to export the report to Excel...They have an
option of Exporting to Excel 5, 7 and 8.
But lately, they were not able to do so, export to Excel will just close the
application down without any warning.
We all currently have Office 2007 installed, and I am not sure if that is
the cause of the issue. But when I export the report from my development
machine I have this option to pick "Excel 97-2000" (I don’t' see the "Excel
5, 7, 8" option at all)...Report names in listbox
I recently upgraded to Access 2007 and am having some trouble with the
changes. I have a form with a listbox in which I would like to display the
names of all the reports in the database. I've tried using the following as
the rowsource for the listbox, but in form view nothing is displayed. Does
anyone know how to do this?
WHERE (((Left([Name],1))<"~") AND ((MSysObjects.Type)=-32764))
ORDER BY MSysObjects.Name;"
I think you made a slight typo. Try (((Left([Name],1))<>&quo...zeros in the report
This report is showing item where the invoices are paid and the balance due
is zero, making it a very long report.
I have tried remove paid transactions and and reconcilling but neither works
to handle this problem.
May we assume that you selected to exclude zero balance accounts in the Sales
Analysis Report Options window?
> This report is showing item where the invoices are paid and the balance due
> is zero, making it a very long repor...Reporting Sevices help!!!
I need to know if there is a way to change the Reporting Services Reports in
CRM to swith the est. Revenue field used to a seperate field. I'm doing a
multi currency customisation all my user will be using different currency
price lists e.g. euro price list, yen price list etc. I'm then doing a
calculation to take each account opportunities etc est. revenue and put it in
usd which is the reporting currency. the usd est revenue is stored in a
seperate field calle new_estrevenueusd and i want this field to be used for
all reports instead of the original est. revenue fiel...Report Writer Functions #2
Where can I find instructions and examples on the various report writer
functions? I've installed the SDK but I don't see anything there.
The Report Writer On-line manual (Help - Printable Manuals - Reporting -
Report Writer) has a fairly good description of the functions in Chapter 6.
Do you look there or is there a specific function that you did not find there
for which you are searching?
> Where can I find instructions and examples on the various report writer
> functions? I've installed the SDK but I don't see anything there.
Hi El...Fax reports from Access 2007
Is there a simple way to send a report to a fax server in Access 2007
running on Windows Vista?