GP 10.0 SP2 install issue

I am attempting to upgrade from GP 9.0 SP3 to GP 10.0 SP2 (which I
believe is cumulative with sp1 but please let me know if that is not
the case).  I am receiving the following error on every table within
one company when I run the GP 10.0 utility after installing 10.0 SP2:

The path for this table was not resolved properly
A possible problem exists in the pathnames table or in the
translations table.

Any idea what this error is and what I can do to resolve it?

Thanks in advance!
0
lfischmar (4)
8/4/2008 9:45:41 PM
greatplains 29623 articles. 6 followers. Follow

0 Replies
1018 Views

Similar Articles

[PageSpeed] 38

Reply:

Similar Artilces:

Installing office 2007 student over a standard trial
My computer came pre-installed with a copy of Microsoft office, I don't' recall which version, but it is expired and had Excel, OneNote, PowerPoint, and Word. I've signed up for night school courses, and the school lets students download and install Office 2007 as a perk. Do I need to remove the trial before running the installer? Also, I've heard that Office 2003 and 2007 can coexist. I currently have my old copy of office 2003 installed on Virtual PC with my old copy of Windows XP professional, can I have both available on the host OS? How would I set that up?...

Converting Crystal report from MSCRM 1.2
I have a client who has upgraded to V3.0 for CRM. They want to continue using Crystal for their reporting engine because they have 40 custom reports. Does anyone know how to easily accomplish this? I have created a new connection to the new CRM Views in SQL, but I can't seem to figure out how to easily replace all the fields that are currently in the report using the SSO connection to my new connection. Any help would be greatly appreciated. Thanks, Amy many of the services such as rpttosql.com say they will only convert so far. some even say they will only get the general lay...

Replication/GAL issues
Hi, I have an Exchange 5.5 environment with SP4. We have over 11 sites and in the London site I have installed three servers. I have mailboxes sitting on all three servers in London. Problem is, updates to the GAL on any server in the organisation are not being noticed by users connected to one particular server, located in the London site. The other two are fine. For Example, a mailbox is deleted in the Sydney site. After a while, a user checks the GAL from within Outlook and notices that the mailbox has infact disappeared, but not for users connected to one particular server. I checked by...

Role Issue
Dear All, A user who has a sales manager role was working as usual on CRM. One fine day apparently he can only view service and settings and in the workplace only articles. He should be able to view sales and marketing as he was doing before. How can this be resolved? You may want to look at the user's record. He probably has an administrative license or is in restircted mode. -- Patrick Verbeeten (MCPD) Lead Developer Aviva IT Tools for CRM Developers and Administrators http://www.patrickverbeeten.com/Tools.aspx "Faiz Amir" wrote: > Dear All, > A user who...

Public Folder Junk Mail Issues: OL 2k3, EX 2k3 & IMF
Hi We are using: Outlook 2k3 Exchange 2k3 SP1 with IMF installed I am finding that Junk Mail that has been sent to a public folder, but identified by either IMF or Outlook Filter are ending up in 'random' users junk mail folders. i.e. one user will have 3 junk messages, another user will have another 3. Our receptionist is responsible for the folder so ideally all junk mail would go into her junk folder or remain in the Public Folder. All of our staff have read/write/delete access to the public folders & send on behalf, all staff also have the Public Folder in their Outlook Ma...

'In maintenance mode' status after Exchange 2003 upgrade to SP2
Hello, I have upgraded all my Exchange 2003 (Enterprise edition) servers from SP1 to SP2. One of the servers display now in the status "In Maintenance Mode". The five other servers are at status "Available". Exchange is correctly running on all of them. It's the first time I see the status "In Maintenance Mode" and I cannot find any information on it. Do you have any idea? http://hellomate.typepad.com/exchange/2004/03/exchange_in_mai.html -- Neil Hobson Exchange MVP "Sadissa" <Sadissa@discussions.microsoft.com> wrote in message n...

excel 06-05-10
I have a spread sheet and in it i have data validation tables when i finish picking from them and email the sheet i then want to clear the info in the tables but not the data validation table and not usr macro I'm not exactly sure about what you want to do, Is the whole range filled in with data validation in the cells to create your table or only part. If you can select all the cells with data validation then you can press delete on the keyboard to clear all the contents, but the data validation remains. Or if this is difficult because the data validation is dotted about the...

Numbers turn red when equals to 0
Good day, Im monitoring our stock inventory using excel, i just want to know if I can make a certain cell turn red if my inventory is >5 or equal to zero.? Thanks -- shiela21cute ------------------------------------------------------------------------ shiela21cute's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=33169 View this thread: http://www.excelforum.com/showthread.php?threadid=529926 Check out Conditional formatting Ed -- EdMac ------------------------------------------------------------------------ EdMac's Profile: http://www.excelforum...

Bank Recon GP 10 problem
Hi We are a VAR that's upgraded one client to GP 10 and installed GP 10 for another new client, both on SQL 2000. In both cases there's an incorrect balance showing for Cashbook Balance field (cashbook maintenance screen) using the Bank Recon module. Also the cashbook balance is not re-calculated (recon screen) when "Incl Trans To Date" field is changed, for both clients. We can update the balance in Cashbook Master table (CM00100) in SQL but this doesn't solve the problem. Any suggestions? ...

Timeout issues on Sales Orders with many Products
Hi all, I'm experiencing timeout issues with Sales Orders that have 25-30 products on the Order Detail level. I haven't found any documentation on this particular issue. Has any ever seen this before? I'm a little loathe to start reindexing the tables, especially considering the SalesOrderDetail table has less than 300 rows. -Luke ...

Question #10
If possible... How do I get excel to change the color of a "grid" if I enter say specfic letter or word in it. Example. 800 columns by 800 rows All columns and rows are small as possible Each letter would mean something, and I would need the grid with tha letter to be a specifc color. To allow easy viewing of the information V = red R = grey H = blue So instead of filling in each color per grid myself, I would get exce to auto-fill Any help would be greatly appreciat -- dirtytongu ----------------------------------------------------------------------- dirtytongue's Profi...

Date format of 0 and if statements
I have an is statment as such: =IF('Raw Data'!A5=0,,'Raw Data'!A5) This issue I have is when I format fields as "date" and the reference cell = 0 excel formates the cell as 01/00/00. I have also used the formula: =IF('Raw Data'!A5=0,"",'Raw Data'!A5) The issue I have is I want to create graphs of this data in a dynamic fashion, but when the data range of the graph encounters either "" or 1/00/00 as a date, it plots it as a data point. I need a way to make my IF statment to produce a BLANK or EMPTY cell. Is there a key word in...

Synchonization with SFO 3.0 performance
Hello everyone, I would like to know if the syncronization of the Sales for Outlook has better performance in release 3.0 ?? Is there a place i can find information on the way the new SFO is working ? Thank you, -- Marie-C I was meaning 'Is there a place i can find information on the way the new SFO is built' . Does it still use Cassini ? Thank you -- MC "MC" wrote: > > Hello everyone, > > I would like to know if the syncronization of the Sales for Outlook has > better performance in release 3.0 ?? > > Is there a place i can find in...

CRM 4.0 Client Rollups ( all of them) fail
All- Have a CRM 4.0 install and have applied the rollups to 4 level- all server rollups went fine. When trying to apply a roll up ( I tried 1 2 4 and 5 ) I am getting a failure Thanks for the look! here is part of the log- 11:17:56| Info| === Managed setup logging started: 7/10/2009 11:17:56 AM === 11:17:56|Verbose| Method entry: Microsoft.Crm.UpdateWrapper.UpdateSetup.Initialize 11:17:56|Verbose| Method entry: Microsoft.Crm.Setup.Common.SetupBase.Initialize 11:17:56|Verbose| Method exit: Microsoft.Crm.Setup.Common.SetupBase.Initialize 11:17:56|Verbose| Method exit: Microsoft.Crm.UpdateWra...

How to integrate Chunk file with GP.
Hello everyone, I am new to GP. I have got a chunk file from a customer. That chunk file contains an HR module created by someone for that customer. Now, customer wants that all the business logic should be transfered from Dexterity to .Net managed code. For that he provided me a chunk file, and database backup (SQL Server). Now when I placed the chunk file into the GP folder and start GP, pop-up asks me to include new code, if I press yes then that new code is included. Here, I need to clearify that currently I am working on Sample Company (because, I can not find any way to start GP...

Outlook 2007 adding contacts issue #2
Hello! I apologize in advance if this has been answered, but I couldn't find it anywhere... today I added contacts to outlook 2007...never had used it before on Vista ever...and closed out went to lunch... came back, I cannot add any new contacts. All options to add a greyed out... If I select file new.....adding contacts is there but greyed out... any ideas on what to change? Thanks! lori, Go to your contacts page and type CTRL + N. The new contact page will open. Or on your contacts page, click New on the button that appears just below the File menu item. Or on your contacts pa...

Domain name issue migrating 5.5 to Exchange 2003
We are prepairing to migrate Echange 5.5 to Exchange 2003. This has come up as an issue: Our domain is cornerstone instead of cornerstone.com Our email address is "firstname.lastname@cornerstonegrp.com" instead of: "firstname.lastname@cornerstone.com" ...

Setting Up Windows Mail 01-05-10
I am having trouble setting up windows mail. This is the message I get "The connection to the server has failed. Subject 'Hello', Account: 'Work', Server: 'pop3', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E" I don't know what to enter when I go into accounts & properties. I have Time Warner Cable internet and I am working off of a laptop. "NormaH" <NormaH@discussions.microsoft.com> wrote in message news:B119C5BC-0455-4A2B-8346-FD86236D0F9C@microsoft.com... >I am having ...

Integration GP 8.0 with CRM 3.0
Hi. i'm newbie in GP but i have been know CRM 3.0, i want to do integration between GP and CRM using Microsoft Dynamics CRM Connector for Microsoft Dynamics GP. After all installation and configuration, the integration was work. I add an account in CRM then the account which i was added is display in GP (as customer). But why the order between GP and CRM can't integrate? I was follow the instruction in the integration guide. The guide book says that the tax details, tax schedules, shipping methods, payment terms, unit of measure, unit of measure schedules, price groups, price le...

Outlook and Windows installer
When I try to reinstall MS Outlook on a Windows XP (NTFS) machine I get a message: "The installation source for this product is not available. Verify that the source exists and that you can access it." Ive tried repairing and reinstalling the installers to no avail. Anybody have an idea? Thanks. ...

GP2010
What are the options for a Requisition Management solution for new GP BRL Adv Mgmt customers? It is my understanding that the Req Mgmt module has been taken off the GP BRL AM price list. Thanks, John ...

SP2 fails to complete
Server 2000 SP4, Exchange 2003 SP1 SP2 install fails to complete, somewhat similar to KB 919076 but without interupting mail flow. Error message from install routine: Exchange Server component Microsoft Exchange Messaging and Collaboration Services failed. Error: 0xc107041d - 0xc007041d - The service did not respond to the start or control request in a timely fashion. (EXIFS) Looking in event viewer showed that error maessage immediatly preceeded by Faulting application inetinfo.exe, version 5.0.2195.6620, stamp 3de2893b, faulting module unknown, version 0.0.0.0, stamp 00000000, debug...

Profits of IE 7.0 to 8.0 update if usage for adminstrative tasks only
OS: XP, Vista and 7 Case: IE used for administrative tasks only, never for web browsing What are the benefits of upgrading the IE from 7.x to 8.x in this case ? This FAQ answers common enterprise customer questions about Windows Internet Explorer 8. "Windows Internet Explorer 8 FAQ for Business" http://www.microsoft.com/downloads/details.aspx?FamilyID=e1da2f8c-f982-4cae-a83a-831188e57df9&displaylang=en --- Leonard Grey Errare humanum est kakii wrote: > > OS: XP, Vista and 7 > Case: IE used for administrative tasks only, never for web browsing &...

PaperSizes.Count returns 0
Hi All I have a Hp printer 1280 that is installed in windows 7. when I use following code to get Paper count. System.Drawing.Printing.PrinterSettings p = new System.Drawing.Printing.PrinterSettings(); MessageBox.Show(p.PaperSizes.Count.ToString()); it reutrns 0.I can't print from my programm but printer directly works fine. System.Drawing.Printing.PrinterSettings p = new System.Drawing.Printing.PrinterSettings(); p.PrinterName is returned correctly except PaperSize.Count. my program unser winXp works correctly but Win7. Is it possible it's caused by Printer ...

libwww compilation on MSVC 7.0
I am developing some c/c++ programs to fetch .zip files from various external spatial data providers. I need to build the libwww libary in order to make sure that I can write code to download these files via http and ftp protocols without using Microsoft-specific functionality. (client requirement) According to their site.... "Libwww is a highly modular, general-purpose client side Web API written in C for Unix and Windows (Win32) It's well suited for both small and large applications, like browser/editors,robots,batch tools, etc." I've downloaded the Windows installation ...