Too Many IF Statements Nesting Error (Excel Formula Loop w/o VBA)
Hello Excel Problem Gurus,
First of all, let me thank you in advance. I find it exemplary that
you all can devote time to helping others who are having issues with
their work. Hopefully one day I can be at a mentor level, and help
Hope you can help! I have an issue where I don't know how to write the
formula that I need without going over on the nesting. The current
formula that I have is as follows:
Data",IF(V7="Yes",&qu...Office 2003 on WinXP is receiving an error...
This operating is not presently configured to run this application.' This
nmessage keeps popping up after I install WInXP Sp2. Right after I install
office 2003, and I try to open MS word 2003, the above message appears. Can
anyone point me in the right direction?
Insert office cd>repair
"RodneyJ" <u58446@uwe> wrote in message news:a43130535cd3e@uwe...
> This operating is not presently configured to run this application.' This
> nmessage keeps popping up after I install WInXP Sp2. Right after I
> office 2003, and I t...Errors saving to network drive
When my users open an Excel spreadsheet located on a
network drive, make their changes, and then try to save
the spreadsheet, they get an error message saying "Your
changes could not be saved to Whateverfile.xls, but were
saved to XXXXXXXX ( 8 digit hex number ). Close the
existing document, then open the temporary document and
save it under a new name"
The users have been explicitly granted full rights,
including Delete and Modify, to the shared folder in
which the spreadsheet resides.
I have disabled their Symantec Antivirus realtime
protection for the time being.
This pr...Reporting IRA distributions
I have an IRA account with corresponding cash account. I
am trying to get the distribution from the IRA to show up
as "Retirement Income" in the Tax-Related Transactions
report. How to do it?
The distributions are handled as a transfer from the IRA
Investment cash acct to a checking account.
Thanks for any help. Money 99, BTW. Do I need to
upgrade to a later version?
...Error loading XML into DataSet
When I try to load this xml file (see below) into an asp.net dataset
using the following code:
I get the following error:
"The same table (description) cannot be the child table in two nested
If I take out the anchor tag in the description it works fine,
however, I need the anchor tag in there. Does
anyone have any suggestions?
<?xml version="1.0" ?>
<link>http://liftoff.msf...creating a spredsheet and log the info into another spredsheet
I have a excel sheet that is printed out and a cashier manual enters
information, invoice number, invoice amount, cash amount, check
amount, amex amount.... I would like to have the cashier input this
information on her PC and print a copy to go along with the deposit
and at the same time log the information into a google excel document
I created. Any ideas how this can be done?
...Run time error 5 : HQClient
When I double click HQ Client I have message box "Run time error 5 : Invalid
procedure call or argument"
how should I do? I used RMS 2.0
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.
http://www.microsoft.com/Businesssolutions/Community/NewsGr...LNK2001 and LNK2019 errors with template class
This is a multi-part message in MIME format.
I have a smart pointer class that uses template functions that works =
fine under VC6 but it not linking under VS2005.
1>TestGridToolkitView.obj : error LNK2019: unresolved external symbol =
"void __cdecl PrismGCSmartPointer(class CPrismSmartPointer<class =
CDialog> &)" =
referenced in function "protected: __...Custom reports #3
I want to pull a report on how many customers I am getting
every hour of the day. Does anyone out there know how to
do that? I can try writing a query if someone can tell me
which table I can find this information in (timestamp,
transaction etc). Any help is appreciated.
This info is given at the end of the Z report.
If you want to use it in a query open the Z report
recipt file using the Notepad and see the fields that
are used... Report.Hour.HourSales etc...
Hope this helps...
> I want to pull a report on how many cust...delivery failure error
"The e-mail account does not exist at the organization this message was sent
to" then says user unknown, even though other comupters don't have that
I get this error for a few clients, yet other clients can email the same
I have Windows small business server 2000, I am pretty sure everything has
updated patches. I know i security updates automatically. My clients are an
updated Windows XP SR 1 with Office 2003(outlook) SR1.
...on Writexml error
(Type your message here)
I have a XML file as a datasource. I read that file using dataset.readxml.Then in that dataset I make some changes. Now I want to write that changed dataset by overwriting the file that was created initially.
I someone please tell me how to do it.
From: ratnesh gupta
Posted by a user from .NET 247 (http://www.dotnet247.com/)
...Excel error 1706
Whenever I try to start excel on my computer it displays
an error message and it shuts itself down, any other
program from the office pack works properly, except for
the one I mentioned. I reinstalled it and it does the
exact same thing.
Thanks in advance.
...Error with Bold
Range(Cells(1, 1), Cells(1, 2)).Font.FontStyle = "Bold"
Take a look at the activesheet. I bet that range is bolded.
But if you want Recent to be the sheet with the change, add a couple of dots.
.Range(.Cells(1, 1), .Cells(1, 2)).Font.FontStyle = "Bold"
Without those dots, the range refers to the activesheet (if the code is in a
> What's wrong?
> With Worksheets("Recent")
> Range(Cells(1...Oulook 2003 dial up sync errors
we are using outlook 2003 will all current updates
insatlled and are using cashed exchange mode. our
operating system is windows 2000 SP4 with all the current
updates as well. when the user connects and hits f9 to
sync we get the following error in the sync log (i have
run detect and repair and removed and recreated the users
outlook profile) any suggestions??:
18:57:44 Synchronizer Version 11.0.5604
18:57:44 Could not connect to public
18:57:44 The Microsoft Exchange Server
computer is not available. Either there are networ...Error loading outlook 2003
Hey Guys need a little help
I'm running office 2003 with outlook, I'm using my own
exchange server, everytime I load up outlook on one of my
workstations it loads up fine until I hit the inbox, once
I do that Outlook closes down, I check in the event view
and got this error message:
"The MOF file created for the outlook service could not be
loaded. The error code returned by the MOF Complier is
contained in the Record Data. Before the performance
counters of this service can be collected by WMI the MOF
file will need to be loaded manually."
Anyone know a fix inste...Rule Wizard: "Rules In Error"
I have a blackberry, and I have my outlook forwarding
emails to it, but about once a day, I get a message that
says "Rules in Error: Error in Rule Execution" and it
won't forward any emails after that. I only have one
single rule, so it's not a rule conflict. Does anyone
know the deal? This is extremely frustrating as sometimes
I'll be out of the office during the weekend or at night
and won't receive any message for hours on my blackberry,
only to find out later that this "Rules in Error" dialog
box popped up and it won't forward emails. It see...how to run onhand value report
I get the message enter parameter when entering the zoom feature
On Sat, 6 Mar 2010 17:36:01 -0800, junebugg
>I get the message enter parameter when entering the zoom feature
You'll have to give us some more context than that, junebugg. What's the
"onhand value report"? What's the "zoom feature"?
You can see your database; we cannot!
John W. Vinson [MVP]
...Report Can Grow not aligned horizontally
I have a report where I have 1 row of text, memo, number, and date fields.
The memo field can contain up to 4-5 lines of wrapped text. I have set all
teh rows to "can grow". However, on my report, the conditional formatting
For instance, the fill (which I have set to a gray color) in the memo field
is about 3 lines deep when there is a lot of text in the memo field, but the
text and number fields associated with that record are actually only 1 line.
This essentially looks like a mess, small gray filled boxes for the text
fields and a large gray ...Error #5
I've tried to save my transaction data to my desktop. However, each time I
try this I get the error "Error reading or writing file "." " Could someone
tell me what's going on?
...Outlook error message
Unable to expand the folder. The rest of folders could not be opened. There are no additional Microsoft Exchange client licenses available. Contact your adminstrator to obtain a client license to use Microsoft Exchange
This is the error message that our clients are receiving when attempting to open outlook version 2000 or above to Exchange Server 5.5 SP3 server. We do have the available licenses and have already set them up in license manager on the server and then license logging service is started. We keep having to stop and start the License Logging Service and then they can get in fi...XML Serialization Error of Collection
// Can anyone explain the bizarre XML Serialization behavior seen in
the following code.
// It seems that a collection can not be XML Serialized if it contains
an Add() method
// with a single parameter where that parameter is of a type in the
// (or a class derived from something in the System.Data namespace).
// Is there any way to prevent this from blowing up?
/// <summary>A simple class that holds a collection of
ints.</summary>...How to enable the tracking log?
I am just looking for how to enable the tracking log....I
do know how and where, but if I want to enable the
Tracking log, the server will show me some error message
or not responding. I thinks it has to communicate with
other server. but it will be the trouble due to we have
broken the VPN, also I can't delte the directory
duplicate. it still want to keekp it alive...
The question is:
No.1 How to enable the tracking log, I konw how but can't.
No.2 How to delete the directory duplicate connector
after break the connection with other exchange5 server.
could somebody tell me how a...Add a secondary administration group error c1041721
I have added a new administration group for a sub site in Japan and now I am
getting the following error:
The action could not be completed because the Microsoft Exchange Information
Store service is unavailable.
Operation: Retrieving mount information
ID no: c1041721
Exchange Sytem Manger
I get this error when I try and drill down to the new admin group to the
First Storage Group. I only get this message on machines on my side of the
network. If I remote to the mail server in the new site I am able to drill
all the way down and see the mailboxes. I can also see our main site
informat...Report: Cell #1, Cell #2, Cell #3, Cell #4
I am stuck again and would love som help :(
I would like to repeat all words found inside ~25 cells, separated only
by ", ", ignoring empty cells.
A1: [Apple ]
A5: [Syrup ]
A6: [ ]
A7: [ ]
A8: [ ]
The result should be something like:
[Apple, Orange, Banana, Tomato, Syrup]
JemyM's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=26945
View this thread: http://www.excelforum.com/showthread.php?thre...Error: msaccess.exe has generated errors and will be closed by windows
I get error mesage "msaccess.exe has generated errors and will be closed by
windows" when preview report.
I'm using Access 2000 and Windows 2000.