how can I fix the size of frame? once I fixed ,the user cannot changed its size
"msnews.microsoft.com" <email@example.com> д���ʼ�
Handle CFrameWnd::OnGetMinMaxInfo and specify whatever size you want for
your frame to be.
Ajay Kalra [MVP - VC++]
"msnews.microsoft.com" <firstname.lastname@example.org> wrote in message
...Can I mouse over an object and make it move?
I'm going to have a survey question on a slide where the answer is a number.
I'm going to have small icons with the numbers on them (0, 1, 2, 3, 4, 5+). I
only want the icon with the number 3 on it to be "clickable" and send them to
the next slide. The other icons I want to move to another spot on the page if
they mouse over the icon. Is this possible? How do I do this? Thanks in
advance for any help!
In article <AA0384FC-8446-44EC-8509-C71324B4F2A1@microsoft.com>, Sharpie wrote:
> I'm going to have a survey question on a slide where the answer is a ...can not send without error code
Hi, kindly help me. Out of sudden I can not send my email, but I still can
receive email. My outgoing email just sitting in the outbox. I try send and
receive several times, there is no error code but they only receiving without
even try to send
I do not change anything in the setting and even truy to recheck all the
setting (SMTP, etc) and everything still ok
need your immediate response, many thanks in advance
How to Remove a Stuck Undeletable Message in Windows Mail
http://www.oehelp.com/WMUtil/De...Calculate As of Date Check Book Opening Balance
Is there any way to calculate as of opening and closing balance of a given
check for Payments and Deposits Listing report
Module = Banak Management
I have a large file, approx 10MB, in excel 2003. Most of the data relates to
calculations for around 5,000 records, and the workbook takes too long to
recalculate. All the vlookup's have been replaced with Index / Match, but
it's still slow, and I have a number of macros that rely upon it
recalculating. Based on a post here, I went to this site:
and ran the timer macros to try and isolate the problem.
The FullCalcTimer takes around 19 secs
The ReCalcTimer takes 0.00013 secs, and
The SheetTimer takes no more than 0.01...How to create a CLR DLL for Sql Server 2005? Is it just any .net class library that you can load into Sql Server 2005 or is there some special project type that I need to start with?
How to create a CLR DLL for Sql Server 2005? Is it just any .net class
library that you can load into Sql Server 2005 or is there some special
project type that I need to start with?
"DR" <email@example.com> wrote in message
> How to create a CLR DLL for Sql Server 2005? Is it just any .net class
> library that you can load into Sql Server 2005 or is there some special
> project type that I need to start with?
You can do it all "by hand" but there is a template "SQL Server project&...Insert fields dynamically into database from a staging table
In our lab when ever a test is performed results are stored in test_results
table ( 10 records at maximum) and with click of a button these results
should be loaded to database, but I have any issue here, each time the
test_result table will have different field names ( one time it will have
test1 , test2 , test3 with labid, next time it might have test1, test4, test5
and labid) so how can I load these fields from test_results table into
database auomatically. Datebase has all these fields so how can I map the
test_results tables fields to database fields to run my dynamic inse...Add PA Inventory Transfers to eConnect
We have on client in particular that are trying to implement an integration
that will ultimately create many PA Inventory Transfers. They would like to
use eConnect to do that, however, only standard Inventory Transfers are
One of two things could happen, PA Inventory Transfers can be merged into
the standard Inventory transfers much the same as the PO's were, or create
the eConnect schema for the PA Inventory Transfers.
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion,...Can't get rid of mailbox??
I have a user that was disabled, then removed from the
domain, but I can't get rid of this _DIS <username> from
showing in the Mailbox Resources screen. Any ideas?
Do you have mailbox retention set up (30 days by default)? Is the mailbox
showing up in Mailbox Resources with a Red 'X' on it? Is it if you run the
clean up agent?
If it is showing up with the red 'X' and you have mailbox retention set that
is why it is still there. You can manually purge it by right clicking on it
in Mailbox Resources and choosing 'Purge.'
Hope that hel...In RMS PO add Level Pricing A, B or C for customization
Currently we are not able to add level price A, B or C in the PO template.
If there is a need to be able to use any of the item level pricing it should
be made available for customization purposes.
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in...Add Movie to Outlook E-Mail Message via "Web Tools" toolbar--question
Using Outlook 2003 (in fact all of Microsoft Office 2003), and have Word
selected as e-mail editor. Windows XP Pro with all updates.
Recently I discovered on the Office web site a way to insert a movie
(inline) to an e-mail message. I have one question about its implementation.
If (in an HTML-formatted e-mail, and Word selected as e-mail editor) with
the cursor in the body of the message, you click on "View", "Toolbars", you
can select a toolbar called "Web Tools". On that is an icon that says
"Movie". If you click on it you can add a movie to the e-ma...How can I split a project day into hours to avoid overallocation?
I am still facing overallocation problems.
I have looked at other posts (including Jan's); but, I am having trouble
resolving the over allocation.
It seems to me that - if two tasks happen on the same day (even if they are
both 2 hours long and the working day is set to 8 hours) MS Project makes
How can I say - set one task to start at 9-11am and one to start at 1-3pm?
Surely this will avoind the overallocation.
Why doesn't MS Project seem to realsie that:
if the working day is 8 hours and someone is working 100% on a 4 ...Newly created users can not log in to Exch2K
I'm running Win2K Server sp4 and Exch2K sp3. As of last Friday, any newly created user can log into the domain but can not access the exchange server. They keep getting the "user-ID, domain, password" prompt. I've tried deleting the user and re-adding to no avail. I've checked licensing and all is well in that area. Any ideas? Thanks in Advance.
Did you checked the user's properties and can you see the users e-mail
address ? I think that the user properties are not updated. Do a manual
update to all, close ESM and open again and see. And check is the admi...can't get sheet to display after editing header
I was working on a spreadsheet in Excel 2007 that I had previously created in
Excel 2003. When I edited the header in page layout and switch back to
normal view my data disappeared. I can see the data in print preview, but
don't know how to view it and work with it in normal view because in noraml
view it is hidden. What am i doing wrong?
...Can't delete "virus" program from Temp Folders
I have 3 remaining "virus" programs in temp folders:
* c:\Doc & Sett\name\local settings\Temp
When delete or move to desktop, get error:
"Cannnot move........being used by another program..."
Tried Safe Mode, but "virus" programs not there......
Any way I can delete or move to trash?
What program are you using to try to remove them?
What anti-virus app is installed, and is that what you are using to
Install update and run Malwarebytes Anti-Malware and see if it can
remove them in...Can't view template file in Tools>Options>File Locations
I have created a template and saved it to a shared folder. When users who
have access to this folder try to add this template to their 'On my
computer...' template list by selecting Tools>Options>File
Locations>Workgroup templates>Modify, the template is not visible in the
'Modify Location' window. The template is visible in Windows Explorer, and
when users navigate to its location in Word using File>New.
Why would the template not appear in the 'Modify Location' window? Any ideas
for how I can make it appear?
In that dialog, you will no...Can't Delet Email Message
I have an email in my Outlook 2002 inbox (a forwarded
task) that I cannot delete. When I try to delete it I get
an error message saying "Outlook cannot do that action on
this type of attachment." I experienced a similar problem
in Outlook Express when my inbox was corrupted and fixed
that problem by deleting my inbox. But when I try to do
something similar in Outlook 2002 I just get an error
message that says the .pst file is in use.
Try closing Outlook, moving the .pst to another location and then import
everything back in filtering out the bad message if ...Can't access send/receive under mail setup
I am using Outlook 2003 with exchange. I want to add a pop3 account. The
Pop3 account sends but won't receive (although the Outlook test message is
fine). When I go to tools/options/mail setup and push the send/receive
button, nothing happens.
I have just installed a new hard drive. This worked on the old one, and on
other computers. I have recreated the profile from scratch but I have the
What's going on? Can someone help me?
Sammie SBS 2003, OFFICE 2003, XP-PRO-SP3, IE7
...Auto Fill Fields
I have a database of contacts (names, addresses, phone numbers, emails). I
have created a table with this info already filled out (imported from Excel).
All I want to do is create a form with a single drop-down list where, when
the last name is selected, all the other fields automatically populate with
that person's correct information.
I have tried DLookup but that seems too cumbersome and doesn't work unless I
go to design view and back to form view. Is there not a simple function in
Access that lets me do what I need to without having to write code. I am NOT
a code writer,...how can i copy a document to a CD without making it read only?
HOW CAN I COPY A DOCUMENT TO A CD WITHOUT MAKING IN READ ONLY?
You can't. It is not the file, but the media, that is read only. Even CD-RW
media does not allow editing a file on the CD. Copy te file from CD to HD,
mak edits and if a CD-RW you should be able to burn the edited file back to
> HOW CAN I COPY A DOCUMENT TO A CD WITHOUT MAKING IN READ ONLY?
i build some macro in excel based on access,
at the start i'm doing manual calculate in the code so it will not
desturn the proccessing
but in the end of my automation i'm bringing back the
automatecalculation but then the proccessing is taking alot of time
even more then the accually vba proccessing,
how can i faster this issue?
I don't know a way of getting excel to speed up calculations--except for getting
a faster pc.
And here are a couple of sites that discuss slow performance. The first is by
Charles Williams and the second by David McRitchie:
http://www.decision...Can't start Money2004
Just installed Money 2004 and when I click on the icon to
start Money it pops up a window and said "Money has
encountered some problem" and have to close. Is that
because of antivirus program. I have already disabled
Norton Antivirus. How can I get Money to start???
I encountered exactly the same problem installing money
2004 on my winxp... :(
The only thing i could do is... downgrade it back to 2003..
>Just installed Money 2004 and when I click on the icon to
>start Money it pops up a window and said "Money has
>encountered so...Exchange 2003 can send, but not receive any messages
We've got an issue with our SBS 2003 box and would appreciate any help to
solve it; all messages are sent okay - to the domain and to the Internet -
but no Internet messages are received.
Exchange 2003 is running behind the "basic firewall" of SBS 2003 with an
ADSL line, and the MX record seems to be correctly pointing to it:
Domain is "pleni.com.br",
Public and static IP address is 18.104.22.168.
The SMTP Virtual Server is assigned to all IP addresses on the server (the
public one listed above, and the internal 192.168.16.2). It's granting relay ...can 2 copies of mail be saved in outlook
I would like to be able to have 2 copies of mail saved in Outlook, so mail
can be simultaniously be opened on 2 computers with the same email address.
Is this possible?
Outlook saves data on the local PC
If you want to access the same recieved mails on another PC, you set up your
mail account in Outlook on the other PC, and on both Outlooks you select the
option to keep a copy on the server. (The sent mail will only be seen on the
PC it was sent from)
If you use an imap account the mail will be in sync on both PC's
"dd" <firstname.lastname@example.org> wrote ...How do I add GAL to "Reguarding " in CRM?
My customer want to add GAL to "Reguarding" in CRM. How do I do that? Should
I do somthing to onChange() event?
thank you for your time.