How do I reference a cell to automatically update in a header
How do I reference a cell in a worksheet to automatically report in a header
or a footer.
I believe it could be accomplished with an Event-Macro at the sheets level.
Assuming B5 Text should be reflected as the Header - try this:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$B$5" Then
ActiveSheet.PageSetup.CenterHeader = [B5]
> How do I reference a cell in a worksheet to automatically report in a header ...update two fields at once
Hi Access Gurus,
In A2003 I want to write an update query which updates about ten fields at
once. The idea is that if any one of these fields is null, I update it with
a value read from a linked Excel table.
For the sake of simplicity, let's say I have only 2 fields, F1 and F2.
Either one of them might have a null value. The logic is: IF F1 is null,
update it, and IF F2 is null, update it, but if the field already has a
value (is non-null), let it alone. Can I do this in one update query, or do
I have to write a separate query for each field I am updating? In the quer...Microsoft Prject 2003 Updating Resource Usage
In Project 2003 when i update the progress of a taskto a percentage complete,
does this automatically update the resource usage sheet ?
For example. If I have a task assigned to a resource that is 8 hrs, and I
update the task to 50% complete, I would expect to see the resource hours, on
the resource usage view change from 8 to 4
Is this incorrect ?
If so, how can i see Remaining Hours on a Resource Usage view. I don't see a
selection for this in the dropdown options.
I'm afraid remaining work is indeed not available as an option in the
timescaled (the right) part ...Excel 2007
Excel 2003 - Updating charts was easy, right click chart, select view data
source, reselct new data, click OK
Right click on data series in chart; open Edit Series dialog.
Bernard V Liengme
remove caps from email
"SWODoug" <SWODoug@discussions.microsoft.com> wrote in message
> Excel 2003 - Updating charts was easy, right click chart, select view data
> source, reselct new data, click OK
> Excel 2007????????????
Select chart. C...Updating column based on varying criteria
I have 3 columns (taxable_ac, zone, levy) in a table named "temp".
I would like to update levy with taxable_ac*10 where zone=1 and
taxable_ac*20 where zone=2. I would prefer to avoid using multiple imbedded
if-statements if at all possible. Here is where I got stuck.
UPDATE temp SET temp.levy = taxable_ac*"10"
I tried the following, but it obviously doesn't work. It should give you an
idea of what i'm trying to do though.
UPDATE temp SET temp.levy = taxable_ac*"10"
WHERE temp.zone="1" AND
UPDATE temp SET temp....Possible BUG Assoc VB, M$ latest security Update
Downloaded latest security Updates from M$ last night. (4/16/2009)
Had 9 updates installed my system.
After reboot attempted to access a VB project.
Project OK, but VB IDE acting odd.
1) Any old project the IDE Property page is -- blank -- and just shows
the two tabs at the top.
2) Any new project IDE appears to work fine.
Anyone else have this issue??
Forgot System Info:
XP-Pro(SP3) and VB5(SP3)
"David" <NoWhere@earthlink.net> wrote in message
> Downloaded latest security Updates from M$ l...Can't update bank account /credit cards
Is anyone else experiencing problems downloading the data? It just waits
forever and then errors out.
"misterp" <email@example.com> wrote in message
> Is anyone else experiencing problems downloading the data? It just waits
> forever and then errors out.
Yes indeed, the same problem here.
Money 2007 Premium, build 1303.
Same problem here, and I can't find a fix, or figure out why it won't update.
> Is anyone else experiencing problems ...a protected cell w/formula only updates only on file save?
I have an excel worksheet that use to work fine. Now all of a sudden the cell
with a formula no longer updates automatically. It only updates the
calculated cell once I save the file.
First job - go to Tools|Options|Calculation tab and make sure Automatic is
"snap" <firstname.lastname@example.org> wrote in message
>I have an excel worksheet that use to work fine. Now all of a sudden the
> with a formula no longer updates automatically. It only updates the
> calculated ce...CRM 4.0 Update Rollup 2 Build number
We just completed testing update rollup 2 in test so are ready to deploy it
however I am concerned that it does not update it's build number. It says it
installed correctly, I can see it in the add remove programs, I checked to be
sure the webconfig file was update correctly on the server. Neither the
client nor the server show the new build number. Makes me nervous to rollout
to users. Any help?
Also, on my computer tried installing update rollup 3, it also doesn't
update the buildnumber.
Did you find a solution already?
I'm having the same problem and I don't fin...Update GUI text field from Worker Thread
I need to update the Text Field in a dialog box from a worker thread.
Can someone please give me a example code sample on how to acheive this.
> I need to update the Text Field in a dialog box from a worker thread.
> Can someone please give me a example code sample on how to acheive this.
Just post a custom message from worker thread to GUI thread. Here is an
example from Joe's article at codeproject:
...Text Update through CDialog and CFrame
I am running a program that requires a text update or
maybe a progress bar of sort. My program is used to
convert several files into one big file. Within the
program it updates the Percentage of how much of the
process is complete. I want to Show that Updated
Percentage on CDialog and/or CFrame. And if this is
possible also incorporate a progress bar.
I have the text "update" through CFrame using CClientDC
and having the program integrated into the CFrame Class I
created. But the "update" is rather slow and when I
resize the window or minumize and restore it the ...CSV file to update Stock/MF prices
Hello! I live in Brazil and MS-Money does not support Brazilian securities.
As I have seen others ask, but not this question...is there a way to import
stock/MF prices from a *.csv file? thx
None we are aware of. You might be able to develop something that ran Excel
and used SendKeys to do manual price history entries in Money. It'd probably
get ugly if it was doable.
"rob_luis" <email@example.com> wrote in message
> Hello! I live in Brazil and MS-Money does not support Brazilian
> ...Option Box on user from to update workbook
I have (20) Option Boxes on a User Form that are for inputing Qty. User can
check 1 Box out of the 20. Example: If user selects Option box 601, then
changes to select option box 610. Box 601 unselects automaticaly. That is
what I want them to do.
I recorded a macro for each of the 20 Option Boxes, that makes the changes
according to Option Box selected.
Option Box Names are as follows:
Option Box = Battery_String_Qty_601
Option Boxes 602-619
Option Box = Battery_String_Qty_620
What I need to do is when User selects the option box 601-620 the Codes runs
when the Update ...SP2 lame updater can't wait for backup
"The update was unable to close Money. If you want to continue with the
update, please close Money and then click OK. To cancel the update, click
Message seen while Money was busy compressing its backup. It sure seems like
the least the thing could do is understand why it can't shut itself down...
I suppose. But just waiting it out (took 10 minutes after it appeared to
close during my SP1 update, just a few seconds after I clicked on Postpose
Backup for the SP2 update) is no worse than a lot of the other Money
problems. At least this one eventually works its...2005 account update successful, but current data missing...
Am using 2005 Deluxe (126.96.36.1995) on XP Pro/SP2, IE6.0.2900. An account
update statement is successful (so it says), but account information is
incomplete. Have tried to repair file (quick/std), emptied TIF, deleted old
stmt, verified IE settings, and file associations.
Before spending $35 to call tech support,
1) Is there a way to "force" a download of all past data from the FI to the
2) Although an account can be deleted, and then re-created by download, this
will not preserve any data that was entered by hand. How could I preserve the
"old" ...Update doesn't find expected version
Outlook 2007 SP1 - I went to install the performance patch KB933493 as I'm
having issues with long launch times but got the error message:
"The expected version of the product was not found on the system".
Does this mean that this update was included in SP1 or is there some other
That's included in SP1.
Long launch time issues are usually caused by addins.
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003
Outlook FAQ, HowTo, Downloads, Add-Ins and more
Real World Questio...What is the best way to insert a time and date that will update ..
What is the best way to insert a time and date that will update in Excel?
> What is the best way to insert a time and date that will update in Excel?
In article <AE5236AA-988F-4613-9961-64C2AA6BEF02@microsoft.com>,
"dmw01va" <firstname.lastname@example.org> wrote:
> What is the best way to insert a time and date that will update in Excel?
Hope this helps!
will display the time & date (depending on formatting - format / cells) and
this will be updated...how to link the updated database to a shape
First I have linked a particular shape in a drawing with some values in the
database. After that I have updated the database with few more values. Now if
I'm saving the drawing as a web page it is giving the message as "There was
an error creating a file". what is the error and where to find the errors if
they occur in a visio. Thanks in advance.
...Unsuccessful statement updates
One day about a week ago, my Home Depot and Sears credit card accounts would
not update although I have had them working for the last six months. After
going through the process of online setup, Money appears to download my
acount information then an error message box pops up saying the information
could not be updated from your bank or brokerage. When I send the error
message into Microsoft, the bleow data is presented on a web page but without
any guidance. Anyone have the same problem?
Event ID: obres:22063
Source: 15.0 ...no update avail for ofc2k3 sp3 on windows 7 ?
windows 7 update find any security update for small business office 2k3 with
is this unseal?
Could you re-write your message in Standard English so that German Swines
can understand you. These groups are read by people for whom English is a
second or even third language. They only understand Standard English or
what we call Queens English!
"GS" <gsmsnews.microsoft.comGS@msnews.Nomail.com> wrote in message
> windows 7 update find any security update for small business office...Updating Dialog when lost focus
I have a non-modal dialog within my MFC app'. Is it possible to
update the dialog when it hasnt got focus?
Thanks in advance.
Tim Woodburn wrote:
> I have a non-modal dialog within my MFC app'. Is it possible to
> update the dialog when it hasnt got focus?
> Thanks in advance.
Certainly. Focus determines where keys go. It has nothing to do with
updating the display. Send new data to the controls and they will update.
Scott McPhillips [VC++ MVP]
It's just a window. You can do anything you want to it. Whether or not one of its contr...Update Watch without breaking in VC6?
Is there a way to update watch window on the fly at a designated point
in the code, without breaking, in VC6.0?
I am not aware of any such mechanism.
On 19 Mar 2007 09:19:59 -0700, "Harvey" <email@example.com> wrote:
>Is there a way to update watch window on the fly at a designated point
>in the code, without breaking, in VC6.0?
Joseph M. Newcomer [MVP]
MVP Tips: http://www.flounder.com/mvp_tips.htm
...11.4.0 update from 2/12/2008
I downloaded and installed the latest update (11.4.0) for Office 2004 and afterward noticed that my hard drive was very noisy. I then got a message that my hard drive was full. I shut my MacBook down and restarted it. I then went to Finder and saw that I had only 828.9MB of space left. This is a brand new MacBook with a 160GB drive on it. Before downloading and installing this update, I had over 102GB of free space. What has Microsoft Office done with all of my disk space?
I'm new to Macs so how can I find the files that would be taking up all of this space?
I'd appreciate any input on...Update between two workbooks.........
I am working on a worksheet that relies on data from a log that is
kept on another workbook. The log workbook is updated constantly by a
team of 12 people and no two people can be in the log at the same
time. So it works very nicely for that purpose.
I am builidng in another ' calculation ' workbook a worksheet that
will use the data from the log workbook and the 3 fields from the log
will be used as descriptions from one entry from the log. For ease
of update I would use a second worksheet in the calculation workbook
to hold the entire contents of the original worksheet from the ...Records backing out of Econnect Update 7.5.02
I have seen other posts and am curious as to what causes inserts in a
transaction mode to back out.
When it works every time. If I start the project in Visual Studio and
run the web page. In order to get another transaction in sucessfully, I
have to close Visual Studio, change the XML and restart and run the web
I see it work here and there when I run it in a standalone web
enviroment. There are never any errors when the transaction backs out.
When it backs out....you can see the Vendor ID temporarily in GP until
it completely backs out.
The code uses the econnect75.dll and the foll...