Exchange for remote users/offices
Up to this point i've used SBS 2003 with POP3 (using Popbeamer)...the
reason i chose this from the get go was because we have about 15 users
here on site and about another 20 that are scattered across the globe.
I didn't want to be in charge of mail for those that weren't here
remotely, so figured just using the POP3 route was the way to go.
Well, i'm preparing to move to SBS 2008 and REALLY want to set it up
as a true Exchange server hosing the mail. But, again, am not sure i
want to deal with the other 20 users if i don't have to. So, is there
a way to set up ...SMTP Event Sink not firing
We have written an SMTP Event Sink to record all email into a database.
This works fine for incoming emails but never seems to get triggered for
outgoing emails. Is there some reason specific to SBS2003 which prevents
this Event Sink from firing?
Further research into this problem suggests I might need to setup an SMTP
Bridgehead server and/or an SMTP connector for this. Can anyone give me
some clues how to do this in SBS?
"Nick" <NoOne@NotHere.com> wrote in message
news:%23WkuwSW4KHA.4952@TK2MSFTNGP02.phx...multiple Domain name delivery problem
hi, I currently have Exchange Server 2003 Build 7638:2 SP2,. We have multiple
domain names being delivered to the exchange store. I have nothad any
problems, but i currently have one user that is not receiving emails with
attachments from one certain "internet" sender to one of her email addresses,
but the other address works fine & if they send emails without attachments,
everything works fine from either address. I have had the user send them
message with attachments to me & the user with the problem & i get the
message, but not the other user! I even use message...Exchange update problem
I have tried to upgrade exch2k3 sp1 to sp2, but the update fails with "the
file pcproxy.dll is in use, and setup cannot identify the app or srvc. setup
Any clues/ideas/suggestions? Please.
This message has been checked for all known viruses.
The information contained in this e-mail and any attachments is confidential
and may be the subject of legal, professional or other privilege. It is
intended for the named addressee only and may not ...SMTP Connectors #4
I have a problem with two Front-End servers in NLB. I have two connectors
with address space *, one connector with cost 10 the other with cost 20 for
connector availability purposes. Inbound mails are targeted to FrontEnd1,
outbound mails should go from FrontEnd2 (e.g. MX for FrontEnd1 cost is 10;
MX cost for FrontEnd2 is 20)
Connectors: FrontEnd1 - Address space * - cost 10 - bridgehead srv =
FrontEnd1; FrontEnd2 - Address space * - cost 20 - bridgehead srv =
If both servers are up and running and somehow some mail ends in queue on
FrontEnd2 it correctly crea...Outlook 2003 and "Check Names"
We are testing Outlook 2003 at our office now and there is
one very frustrating "feature" that is bugging all of us.
When we create a new e-mail message and type in the first
name of a person from the global address book and hit ctrl-
k to check the name...we get a response that Outlook
doesn't recognize the name and there are "no suggestions".
The only way Check Name will successfully resolve the name
is if we type it last name first (ie, Gates, Bill). This
was not the case in Office XP or Outlook 2000. You could
search by first name (or partial first name)...Using part of a cell in a chart title
I have a chart which should get a title. However, this should be partly be
used from a cell e.g.
"counted with 5%"
5% should be taken from the cell and used in the title.
Is this possible?
Yes it's possible but all of the chart title needs to be in the cell. So you
may need to use a helper cell and concatenate text and value.
Andy Pope, Microsoft MVP - Excel
"Nicole" <Nicole@discussions.microsoft.com> wrote in message
news:5CB7A971-AA7F-4C34-BB42-7DC283AA2958@micro...Using expression builder object
I'm developing a wizzard in Access which builds import templates for various
data sources to a fixed set of tables. In step 3 the users must be able to
build an expression ; for instance Left([Fieldx],20) . Now I would like to
have a command button on my form which calls the Access expression builder to
allow the users to use this to build the expression. This expression will
then be stored in a text box linked to the templates table.
Anybody know how to call and use this object from VBA code?
I th...Password Issue with MS Money 2003
I am not familiar with newsgroups but I hope it is a forum
to seek assistance. I am unable to reach MS support via
email from my home computer on this issue. My Money 2003
requires a net passport password to open my account in
Money that I have successfully accessed for approximately
12 months. It does not recognize my password now. I
have attempted several times with my existing password,
changed my net passport password, even uninstalled and re-
installed MS Money 2003 to gain access to my account.
Nothing has worked. Each time it states I have failed to
enter the corr...Outlook 2003 keeps crashing #2
I get this message when I look in System information. Outlook keeps
crashing quite often. I cannot for example delete two messages without
outlook crashing. My colleagues do not have this problem. We are using
the Microsoft mail exhange server.
Faulting application outlook.exe, version 11.0.5510.0, stamp 3f1380f0,
faulting module mso.dll, version 11.0.5606.0, stamp 3f334cce, debug? 0,
fault address 0x003b6e16.
Does anyone has a solution?=20
1) I would definitely apply Service Pack 2for Office 2003 + applicable
critical security updates.
2) Have you tried starting O..."The connection to the Exchange server is unavailable. Outlook must be online or connected to complete this action"
I have setup a number of user accounts and the relative mailboxes without
However, since this afternoon, if I try and connect to a newly mailbox
through the email accounts wizard I get the following error message: "The
connection to the Exchange server is unavailable. Outlook must be online or
connected to complete this action".
This also occurs when I go to File>Open>Other User's Folder... and I try and
lookup an existing account/mailbox that I know I have permission to.
I know Outlook is connected to the Exchange server (I can ping, send and
receive emails) ...Exchange 2003 new install can not receive external email.
I have just setup a new Windows Server 2003 standard edition with
Exchange 2003 standard edition on it. I have been working for a while
trying to get it to receive external email. I can send out and send/
receive internal messages, but when someone trys to send me a message
from outside our network they get the following returned mail message
This Message was undeliverable due to the following reason:
Each of the following recipients was rejected by a remote mail
The reasons given by the server are included to help you determine
each recipient was rejected.
Recipient: <**...How to restore entire server?
This is a long post.
Its that time of year again where I practise some disaster recovery skills.
I set up a completely seperate physical network from the production network.
Its got one Win2000 server (DC + all the Operations Master roles, DNS, WINS,
etc) with SP4 (different AD/DNS root forest) and running Exchange 2000
with SP3 (same org name as production server, admin group, storage group,
logical and physical database names, legacyexchangeDN, etc). As a result, I
can successfully restore our production Exchange 2000 w/SP3 Storage
Group/Information Store database without problems. Outlook...[Exchange 2003] Mail enabled public folder and sender address
I have a Windows 2003 domain with a native mode Exchange 2003 organization;
there are some mail enabled public folders.
When a user replies to a message in a public folder, the outgoing mail's
sender address is the user's one; I want it to be the public folder's one,
or at least I'd like the "reply-to" address to be set to the public
How can I accomplish this?
You would need to grant the user permissions to be able to Send As the
public folder. By default, when you reply to a message that is in a PF, the
PF is not composing the ...Outlook 2003
we have one client pc with Outlook 2003 where the following problem
if a mail is replied from a user created sub folder of the inbox, the
reply will not appear in sent mails, but will end up in the same sub
folder, sender and recipient appear as identical. The mail goes out
properly though, it's just that Outlook sets internally sender =
recipient and bounces the reply back to the subfolder in which the
original mail is stored.
This happens on a Win 2000 machine with SP4 and all updates, the other
clients use Outlook 2000 or XP and there is no such problem.
There are no ru...Install Exchange 2003 Server on new Hardware with same name
I got a new server to move my Exchange Server Installation. I want to
keep the name I'm using now for my Server. Already read TechNet Article
"How to Move Exchange Server 2003 to New Hardware and Keep the Same
Server Name". Is there anything else that I should be aware of that is
not on this TechNet article? I'm using a different Disk Configuration,
does this matters? Should this be a smooth process?
Thanks for any help you can give.
The drive letters MUST match, because the paths of the databases are at the
Active Directory. The disks can have different sizes than the or...Exchange 2k3 imap VS startup
I have an E2k3 SP1 enterprise edition server. Whenever I reboot, the IMAP4
Virtual server does not start back up. I have to go into Exchange System
Manager and manually start it.
How do I make it start automatically?
How is the service set up - to start manually or automatically? Also, I'd
check the dependencies the service has. It may be that it's trying to start
before the other services have completed starting.
"Tim" <firstname.lastname@example.org> wrote in message
I have an E2k3 SP1 enterprise edition serve...Addressing within Exchange 2003
We are running Exchange 2003 SP2. We setup an MX record for a external
email(alumni.cup.edu) these mailboxes do not exist within our exchange org.
But when we send email to these externals email mailboxes we are getting the
#5.5.0 smtp;550 Mailbox unavailable.
Is there a way in exchange to ignore these email address so that we don't
get the NDR from within our Exchange Org?
On Fri, 4 Aug 2006 08:08:02 -0700, Sabo, Eric <email@example.com> wrote:
>We are running Exchange 2003 SP2. We setup an MX record for a external
>email(alumni.cup.edu...how do i add "Software Digrams" Folder in my Visio 2003
how do i add software diags folder in visio 2003 version. Like if i go to
File->New it shows folders like brainstorming, project schedule, block
diagrams but in my case its missing the Software Diags folder which contains
activity diags, web mock ups, use case diags etc. please let me know how to
get that template. thanks.
What edition of Visio are you using? Check by going to the About Microsoft
Office Visio dialog from the Help menu.
"Ankur" <Ankur@discussions.microsoft.com> wrote in message
> how...How do I use traffic lights in excel
I am wanting to use traffic lights in excel that change colour based on the
result of a variance cell, ie if the result of the cell is 10 make the
traffic light green, if it is 20 make the traffic light amber, if the result
is 30 make the traffic light red. How do I do this?
Format>Conditional Formatting>Cell Value is:
Note: you can add up to 3 conditions(4 if you count default)
Gord Dibben Excel MVP
On Wed, 22 Dec 2004 16:35:03 -0800, Shorty <Shorty@discussions.microsoft.com>
>I am wanting to use traffic lights in excel that change colour based on the
&g...Office 2003, Outlook (Outlook Today)...
OK, this is driving me nuts.
I note that w' 2003 (and XP (2002)?) the default install sets the
startup folder to the Inbox.
IIRC, one of the earlier Offices installed Outlook to startup w' that
"all in one view" - Outlook Today.
So just as a wee test - I thought I'd try that for a while, and indeed I
found it quite handy to be able to see all pertinent data on the one
*However* (and I'm wondering if this is the case with others), I *HAVE*
to use my mouse, whenever I switch to the Inbox, or Calendar, or Tasks
to get the damn focus onto a 'sujbect&...Exchange clusters
I am running two exchange2k3 server clusters on win2k3 servers. I am going
to install service pack 2 for exchange2k3. Which cluster do I install it on
first? The active cluster or the passive cluster?
Do you mean you're running one cluster with two nodes?
If you were to install on the active node, Exchange will shut down and the
passive node will become the active node. So, it's clear that you should
install first on the passive node, fail over, then install on the passive
node (which was formerly the active node).
Ed Crow...Filter recordset using query results
I have a form based on a query called [qry Quarterly Planning], it lists all
Itineraries on the system. On this form you can filter records by specifying
a Start and End Date for the [ReviewDate] and/or [Specialist]. It is a
subform on a main unbound form, lets call this Subform1. Along side this I
have another subform (Subform2) which displays ReviewDates that exist
against an Itinerary. In other words Subform1 has a start date of an
activity and if the activity lasts longer than 1 day, then the additional
dates are stored in Subform2 (ItineraryDates). Currently when I...Mails not appearing in Inbox although on Server and viewable by colleague
I have searched the archives and found a few more or less related
topics to my problem, but unfortunately none of them helped.
Here's my problem:
I know that I recieve several mails at a specific time each day. Those
mails are sent to a colleague of mine and myself but only he recieves
My admins looked on the Exchange Server and all say, that they can
definetely see these emails in the server logs and that the server
delivered them to the right mailbox.
If my colleague looks into my mailbox before(!!) I open Outlook, he
sees these mails as unread in my inbox. As soon as I op...Newbie Question: Using Web Services
I've been trying to implement Infopath with CRM with no success. I've
tried the example, http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmbscrm1_2/html/mbs_crminfopathcrmintegration.asp,
to no avail. I have followed the example to the letter, but find the
information about publishing the Web Service to the server to be
somewhat lacking. Admittedly, I am not a programmer, and I am
continually running into an error in line 54:
Has anyone else ...