SPAM List

Hello,

Looks like were placed on a block list as a result of a message that was 
sent out between 4:30pm and 5:00pm yesterday.   I have asked around and all 
staff say that they have not sent out anything questionalble.  We don't seem 
to have any virus' or risks detected by our corprate Antivirus solution.  My 
question is, is there any way to use the tracking features in exchange to try 
and pinpoint who/what was sent out that triggered adding our IP address to 
the block list.

Thanks
0
Kerry1 (30)
2/20/2007 5:17:05 PM
exchange.admin 57650 articles. 2 followers. Follow

2 Replies
355 Views

Similar Articles

[PageSpeed] 5

For Exchange 2003, in case you have the Message Tracking feature enabled on 
the server that sends out the messages, you can use the Message Tracking 
Center Tool in the System Manager console. This logs all messages that pass 
through that server.
Exchange 2007 also has a message tracker which can be found in the 
Management Console under the Toolbox node.

"Kerry" wrote:

> Hello,
> 
> Looks like were placed on a block list as a result of a message that was 
> sent out between 4:30pm and 5:00pm yesterday.   I have asked around and all 
> staff say that they have not sent out anything questionalble.  We don't seem 
> to have any virus' or risks detected by our corprate Antivirus solution.  My 
> question is, is there any way to use the tracking features in exchange to try 
> and pinpoint who/what was sent out that triggered adding our IP address to 
> the block list.
> 
> Thanks
0
MartonSz (9)
2/20/2007 5:34:05 PM
You may want to research the RBL documentation or contact the list provider.

Depending on the list type you were added to, could give you a hint on what 
happened.

You may also want to verify if you are listed on other RBLs from here:
www.dnsstuff.com

-- 
Alexander Zammit
WinDeveloper Software
IMF Tune - Unleash the Full Intelligent Message Filter Power
http://www.windeveloper.com/imftune/


"Kerry" <Kerry@discussions.microsoft.com> wrote in message 
news:97084511-D26B-43CD-B1AC-176589F42400@microsoft.com...
> Hello,
>
> Looks like were placed on a block list as a result of a message that was
> sent out between 4:30pm and 5:00pm yesterday.   I have asked around and 
> all
> staff say that they have not sent out anything questionalble.  We don't 
> seem
> to have any virus' or risks detected by our corprate Antivirus solution. 
> My
> question is, is there any way to use the tracking features in exchange to 
> try
> and pinpoint who/what was sent out that triggered adding our IP address to
> the block list.
>
> Thanks 


0
Alexander
2/20/2007 5:42:10 PM
Reply:

Similar Artilces:

List output to a x by 10 range
I have a list that x lines long. I want to transpose that list to another range (starting on cell M1) that is 10 columns wide and however many rows long. I know this is super simple. Does it have something to do with range resizing? No doubt you've already experimented with macro recorder, discovering the standard transpose command wont wrap within a range. So we need handle the transposition manually. Presuming your data begins in cell A2: Sub test() For Each c In Range("A2", "A" & Range("A65536").End(xlUp).Row) Row = Row + 1 ...

formula to count matching days between two date ranges (for large list of names)
I have two sheets. Sheet 1 and sheet 2. Sheet1: has a list of Social Security Numbers, followed by a date Range (i.e., start date field and end date field). The date ranges are discrete (i.e., do not overlap) with each other for any given name. SHEET 1 Name A Start Date A End Date SSN1 1/1/09 1/5/09 SSN2 4/1/09 4/15/09 SSN1 3/2/10 3/15/10 SSN3 ETC... Sheet 2 has the same information (i.e., multiple records with SSNs, followed by date ranges Name B Start Date B End Date RESULT NEEDED SSN1 1/1/09 1/31/09 5 SSN2 4...

sending emails to distribution lists in outlook 2002
How do I send an email to a distribution list in outlook 2002? The HELP instructuions tell me to click on the insert menu and chose ITEM However when I click on INSERT it does not give me ITEM as an option. You have to create your distribution list first in your "Contact" folder. It will then appear bold. You will then be able to choose the list just as you do a contact. >-----Original Message----- >How do I send an email to a distribution list in outlook >2002? The HELP instructuions tell me to click on the >insert menu and chose ITEM However when I click on I...

Popup tips in tree and lists
Visual Studio 2005. MFC. C++. I have classes derived from CTreeCtrl and CListCtrl. I would like to implement a textual popup information window similar to when you hover over a file in Windows Explorer. I don't know what this popup window is called, so my googling has not got me anywhere. What is this 'information popup' called please? Can such a thing be implemented quickly and easily on a list and a tree? I expect I need to use the TVS_TRACKSELECT flag, but what events etc should I override please? Any tips or pointers? Any codeguru samples? Thanks, GT ...

Setup dropdown list that selection references another dropdown
How do you create a dropdown list that references another dropdown list? ex: selection #1 references the selections in another dropdown list and selection #2 references the selections in a different dropdown list Hi Denny, I am really not sure if you mean dependant lists (or cascading dropdowns as they are often called). If so, then have a look at the following link. http://www.contextures.com/xlDataVal02.html If not what you want then need some more explanation. -- Regards, OssieMac "Denny" wrote: > How do you create a dropdown list that referen...

where can i find a list of excell formula's? #2
I'm learning to use excel more and more and i would like to know how to create a formula that subtracts one cell from another. Is there a list of formula's for excel? Look in HELP contents for function index -- Don Guillett SalesAid Software donaldb@281.com "Art" <Art@discussions.microsoft.com> wrote in message news:DFF58A3A-86CE-415C-A471-0F995F95C108@microsoft.com... > I'm learning to use excel more and more and i would like to know how to > create a formula that subtracts one cell from another. Is there a list of > formula's for excel? Art, y...

Spam Question #2
Hi, This is a question about some messages I am getting from my server. It is a general SMTP and spam question. My boss keeps telling me - I never sent this message, but here's a message telling me it couldn't be delivered! I am wondering if these messages are actually being sent through our server, or somehow spoofed. Here's what makes me think they may be spoofed: Return-path: <here@us.com> Received: from [59.93.199.74] (helo=ilisa.com) by host28.ipowerweb.com with esmtp (Exim 4.43) id 1Ee7h6-0004U2-K6 for mpratap@progia.com; Mon, 21 Nov 2005 01:10:59 -0800 From: ...

Creating drop down lists with multiple options?
I am trying in vain to create a drop down list where users can select more than 1 choice. For example, if the choices in a list which i named are as follows: Blue Red Green Yellow Purple How does one have the option to select any of the colors by themselves or any combination of all of them up? For example, if the question is what is your favorite color? How can a user choose Blue OR Red and Blue OR Red, Blue and Green and so on? Any help would be appreciated. That will require multiple cells. One cell will only hold 1 value. Any single cell solutions are going ...

Electronic Price List
Hi, I am trying to create a template so people can create an electronic price list. I want to put restrictions on cells so that only valid values can be entered in certain columns, for example: Price - Must be greater than Zero Category Code - Must contain a numeric value Unit of Measure - Must match a valid list Plus many others... I would like to set up a worksheet so that users can cut and paste their data in, but if the value is incorrect it highlights it in a different color. I have tried setting up "validation" but if I cut and paste it will not highlight the cell and wo...

Want to keep seperate personal contact list,addr book and PST file
This message is cross posted in two groups public.outlook and public.outlook.general At work, I keep a personal pst file for personal email in a seperate directory with personal files. Every 6 months to a year, I create a new one, retire the old one and back it up to CD, no problem. This keeps my personal stuff completely seperate from work stuff. Oh yeah, Windows2000Pro & Outlook 2000 (connected to Exchange server I believe, whatever that means) I would like to do the same with my contact information. It seems to me that the contact info is in the "main" pst file. I cannot ev...

GDI+ : property & methods list does not appear.
hi, Priyanka again. i installed GDI+ on my system. but i never get the property & methods list after pressing the . or ->. i tried deleting the .ncb file also, but it didnt work. does anybody have idea about this? Thanks and regards, Priyanka ...

How to export mailbox size list from exchange server 5.0?
Does anybody can help me to find a way to export exchange mailbox size list? my exchange server is 5.0vs. THank you very much. J In EXadmin, navigate to the mailbox list under the server - there is a column listing the mailbox sizes. Export that out. HTH. "yiyuhong" <yiyuhong@hotmail.com> wrote in message news:OrEsz8s6DHA.2748@TK2MSFTNGP09.phx.gbl... > Does anybody can help me to find a way to export exchange mailbox size list? > my exchange server is 5.0vs. THank you very much. > > J > > ...

Updating Global Address List
Our global address book needs to have many users updated due to phone number/address changes etc. and my help desk person is bugging me to allow some secretary access to do the updates. I do not know of any secure way to allow someone to do these updates. Can anyone point me in the right direction or am I right to tell the lazy brat it's his job. On Fri, 4 Feb 2005 07:19:02 -0800, "Maive72" <Maive72@discussions.microsoft.com> wrote: >Our global address book needs to have many users updated due to phone >number/address changes etc. and my help desk person is b...

Form of phone numbers in contact list
I am using Blackberry's Desktop Software to syncronize with my MS Outlook Contacts list. The onboard caller-id function of the phone that is supposed to correlate the incoming phone number to a name of a contact (should the number be in my contacts list) isn't working. According to help from Blackberry the problem is the "form" of the numbers as they're being loaded on the Blackberry from MS Outlook. Specifically, apparently the fact that the numbers are stored in the form of (###) ###-#### instead of something like ###-###-#### is keeping the phone from realizi...

Advanced Microsoft Exchange 2003 questions (POP3/SMTP/SPAM)
Hi! Can someone tell me if something like this is possible with an Exchange 2003 Server?: 1. Let say an Exchange 2003 Server is in a big company (e.g. company.com ;) ). All employees have a mailbox on this exchange 2003 Server. All the employees has also a mailbox on a POP3/SMTP server pop3.company.com / smtp.company.com . Can be an Exchange Server 2003 setup so that he automatically collects the mails from an employee pop3 account and put it automatically in his Exchange 2003 Server account??? So that the employee can only use the exchange account to collect all their mails and not from t...

change csv list separator per file?
Hi all, for my work I have to generate different .csv files. Some have a comma "," as list separator, other files need ";" Is there a workaround so that I don't have to change the list separator setting in my regional settings? And/or can I add a "replace ";" by ","" in a macro that converts workbout in a range of .csv sheets? Thanx for your aid, brt! use the "Text to Columns" option on the data menu. Choose delimited, check the boxes for ,(comma) and ;(semi colon) The preview will show how the data has been split, click ...

Multiple selection list box...
I have a multiple selection listbox on a dialog box. When the user picks the listbox items and clicks "OK" my program draws to the main screen. If the user reopens the previous dialog box, I want the previously chosen listbox choices to be highlighted. How would I do this? Thanks, RABMissouri Store the selection in a common place like the Document or MainFrame or the App and do the selection in the OnInitDialog() member function of your dialog. -- Cheers Check Abdoul [VC++ MVP] ----------------------------------- "RBert" <drbert@microcore.net> wrote in m...

Drop down list #7
How can you change the items in a list after you have made a selection in a previous list: i.e. if you select 1 in the first drop down you want the options in the next drop down to be A-K and if you select 2 you want the list to be L-M. See http://www.contextures.com/xlDataVal02.html -- --- HTH Bob (there's no email, no snail mail, but somewhere should be gmail in my addy) "mudcat" <mudcat@discussions.microsoft.com> wrote in message news:D35E1462-ACFB-4B25-8156-16A393062990@microsoft.com... > How can you change the items in a list after you have made a selec...

gmail address shows distribution list
After sending a meeting invitation to a gmail user from outlook, the distrbution list that was set as private, is displayed. Anyone know the fix for this? Did you put it in the To or CC Field? If so, that is to be expected. Use the BCC Field next time. (In Meeting requests, it’s the Resources field) See http://www.slipstick.com/calendar/ccmeeting.htm -- Diane Poremsky [MVP - Outlook] Outlook Tips: http://www.outlook-tips.net/ Outlook & Exchange Solutions Center: http://www.slipstick.com/ Outlook Tips by email: mailto:dailytips-subscribe-request@lists.outlooktips.net ...

List all the address book contacts in outlook
Hi all, I need to retrieve all the contacts that are in my address book in outlook in order to look for particular emails, looking around I just found this script quite useful but it is not exactly what I'm looking for. In fact I need to search all my conctacts in the address book.... $outlook = New-Object -ComObject "outlook.application" $c = $outlook.getnamespace("mapi").getdefaultfolder(10) foreach($tt in $c.items) { echo($tt.account + " - " + $tt.fullname) } Thanks, Mattia i dont know the answer off hand, but i see that the 10 sent to getd...

What is the step-by-step procedure for making a data list?
I've read and re-read how to do datalists, but I cannot get the hang of how to make one and apply it. I need a simple tutorial in how to make one, from A to Z. I want to call in items that have cost associated with them instead of typing them each and every time. Any GOOD help will be greatly appreciated. Try Debra's nice coverage on VLOOKUP at her: http://www.contextures.com/xlFunctions02.html -- Rgds Max xl 97 --- GMT+8, 1� 22' N 103� 45' E xdemechanik <at>yahoo<dot>com ---- "Bobgolfs56" <Bobgolfs56@discussions.microsoft.com> wrote in me...

Add GAL to each users Contact list in Outlook 2003
How do I add the GAL to my users contact tab in Outlook 2003. Why not use Offline Address Books? -- Bharat Suneja MCSE, MCT www.zenprise.com blog: www.suneja.com/blog ----------------------------------------- <smd321@gmail.com> wrote in message news:1131638724.170775.275980@g49g2000cwa.googlegroups.com... > How do I add the GAL to my users contact tab in Outlook 2003. > In news:1131638724.170775.275980@g49g2000cwa.googlegroups.com, smd321@gmail.com <smd321@gmail.com> typed: > How do I add the GAL to my users contact tab in Outlook 2003. The GAL is not Outlook ...

How to mark a massage as Not Spam
Using Outlook in Office 2007 Small Office version. Evan though I have added sender and sender's domain to my safe list, it keeps sending a daily quote to which I have subscribed to McAfee Anti Spam folder. It will allow me to move it to my Inbox but does not remove the Spam designation and continues to put new messages in the Spam folder. Lady Flyer;114185 Wrote: > Using Outlook in Office 2007 Small Office version. Evan though I have > added > sender and sender's domain to my safe list, it keeps sending a daily > quote to > which I have subscribed to ...

Item Integration not populating list price
I am doing and inventory item integration. I can't get the price group, default price level, or the list price to populate. I made sure the list price was put in the currency folder. My price group and price level values do exist. I have tried putting a constant (1.00) into the list price field and that doesn't work either. We are not using extended pricing. Any ideas? Jenny, You will need to have to sources: one for your items and one for your list price. Since list prices are part of the currency collection, IM expects a one to many relationship between the ...

bulk mailing from excel list
Dear Sir, I want to send a mail using excel list. For Eg: i have some email ID's in "column B" & the persons name in "column C" & i want when a mail is send the same mail should go to all the persons with there individual names.... abc@hotmail.com Dear ABC, def@gmail.com Dear DEF In this way... Do u have such formula in excel... See http://www.rondebruin.nl/mail/folder3/message.htm -- Regards Ron de Bruin http://www.rondebruin.nl/tips.htm "Sourabh" <Sourabh@discussions.microsoft.com> wrote in message news:...