Limit on address IDs in GP
Does anyone know if there is a limit on the number of addesss IDs that can be
set up for a customer?
Also is there a limit on the number of Site IDs?
no limits on either
"VGrinam" <VGrinam@discussions.microsoft.com> wrote in message
> Does anyone know if there is a limit on the number of addesss IDs that can
> set up for a customer?
> Also is there a limit on the number of Site IDs?
Thanks. Do you know if there is a limit on number of lines on an SOP
document? I am designing a solution...Can't insert object
I am trying to create a chart in an Excel 2002 worksheet, but as I go
thru the chart wizard the "As object in" option is turned off. It will
only create a chart as a new sheet. When I click on Insert Obect, I
get an error message "Can't insert object". Does anyone know how to
Is the worksheet protected?
Microsoft MVP - Excel
<email@example.com> wrote in message
>I am trying to create a chart in ..."onetime" vendor ID in PM reports
I changed our "Distribution History Detail" report to show vendor names. The
report works well, except for transactions with the vendor ID = "onetime";
for these transactions, the vendor name is always the same. I suspect that
the name always the last name used under that vendor ID. Does anyone know of
a way to correct this issue? Many thanks in advance.
...calling objects method
I have a collection of objects. Each object has few properties and few
methods, among which: save, delete, recall and others.
The "save" method of each object runs few private class functions to double
check data and if everything is fine it adds the data collected in few tables.
I would need a way to iterate the objects in the Collection (and I know how
to do this) and call for each of them the "save" method. Is this possible?
Hoping first it is clear...
it should be:
"ro...dynamic object creation
How can i dynamicly create and display a subclassed object on a formview,
(i.e. the object is not shown in the resource editor) ?
When ever I try to encrypt an email message with windos mail it always comes
up witha message saying I don't have a digital ID. How do I create one?
Please post your message in a newsgroup devoted to your area of concern.
Charles Allen, MVP
> When ever I try to encrypt an email message with windos mail it always comes
> up witha message saying I don't have a digital ID. How do I create one?
...Event ID 8279 (x5) every 5 minutes and 8197 (x1) every 25 minutes.
I read and tried everything that "You Had Me At EHLO" wrote about the
FBPublish and the 8197 error, and I still have this issue. (Also read
Technet, KB and countless exchange blog).
After enabling more logging parameters, the Event Viewer began to receive 5
EventID 8279 every 5 minutes.
Event Type: Information
Event Source: MSExchangeFBPublish
Event Category: General
Event ID: 8279
1. Error opening private store hr = 80040111
2. Unable to open default private store hr = 80040111
3. Error creating query sessions for VM hr = 80040111
4. Error opening private ...Digital ID 03-10-10
For reasons I won't get into, I am trying to forward an email I received to
myself. Have done this many times. In fact, just a couple of days ago. Now
it's giving me the following message:
"To send a signed or encrypted message you must first obtain a digital ID."
Can anyone tell me what to do?
"Nikilet" <Nikilet@discussions.microsoft.com> wrote in message
> For reasons I won't get into, I am trying to forward an email I received
> myself. Have done this ...Event ID: 9554
I am seeing an event ID 9554 showing up on a regular basis in my Exchange
2003 server event logs. I am running Exchange 2003 (not running ExchSP1 yet)
in native mode on a Windows 2003 server (also no W2k3 SP1) on a Windows 2000
The event message is:
Unable to update Mailbox SD in the DS. Mailbox Guid:
93f8d2a7-1790-4bb5-bb74-71ec27468993. Error Code 0x8004010f
Using the MS article 322308 to try and locate the account causing this I
come up with no matching accounts.
Has anyone else seen this?
I got this from www.eventid.net
From a newsgroup post: "This error implies t...Event ID 8276
I'm getting this after removing the orphaned 5.5 server, I see that the
siteFolderServer is pointed to the deleted 5.5 server. The problem is
that the 1st E2k3 server and the 2nd E2k3 server are not replicating
the Public Folders, so it's slowing down my decommissioning of the 1st
E2k3 server that I need to rebuild.
This KB explains the event message I am getting:
Which reccomends this KB, so should I go ahead with it ?
or do I perform this one first ...Cannot Shift Objects Off Sheet #2
All of a sudden I can't insert a new column anywhere within my
workbook. If I click on the column letter and then right
click>insert>I get the error message in the title.
Did I change a setting somehow?
XL: "Cannot Shift Objects Off Sheet" Error Hiding Columns
Remember to look for comments and merged cells.
And for objects that may not be displayed:
tools|options|view tab|Check Show All
Office button|excel options|advanced
Display options for this workbook|For objects|Show|check a...Moving a Bound Object Frame Control
I have a Bound Object Frame control that was created by Auto-Form to display
line drawings I created using Paint, and then inserted into an OLE field in
the table that Auto-Form used to create the form. I cannot change the
properties of the control using VBA code. Particularly I'm concerned about
moving the control and making it visible and invisible. Whenever I start the
command "Me.ControlName." no properties come up to change
A response from a previous question indicated that I may need include some
additional references, but i have no idea what to include.
Any hel...Form/SubForm error while reference the object
I am a novice at Access and do not understand the VB codes.
I have created a form (Software Register) with a subform (Licence No). I
have created a one to many relationship between Software_ID_No in both forms.
The Link Child and Link Master fields are populated with Software_ID_No.
My subform (Licence No) now is linked to the main form (software Register)
and moves with that form.
What I want to do is have the Software_ID_No in the main form populate the
Software_ID_No in the subform, and also put it into the Licence No Table. If
I enter the number manually, it works.
When I c...Events from 2 unique objects? DISPID problem
I have an ATL ActiveX EXE server that has two interfaces, IObject1 and
Both these fire an event. My problem is related to how the DISPID is used.
It seems that even though I have defined unique IDs in the IDL file of the
server, they clash with each other.
The problem arises when I try to capture the events from both IObject1 and
IObject2. If I use only one, the event works fine.
In my EXE server's IDL I have:
[id(1), void Object1Event([in]long S...Excel 2003 - VBA - Error
I have a spread sheet where I insert about 42 columns and shift right. This
worked for a while, then I started getting an Error "Cannot Shift Objects
Off Sheet" . I did find a button that had been shifted so I deleted it. Not
change, still got the error. I then selected all cells and deleted. Still no
Does anyone have any idea of what is happening here?
XL: "Cannot Shift Objects Off Sheet" Error Hiding Columns
Remember to look for comments and merged cells.
Craig Brandt w...if System.IO.StreamWriter write throws an exception, is there anyway to close the System.IO.StreamWriter object? it seems to stay open when this happens then future attempts to write to that same path
if System.IO.StreamWriter write throws an exception, is there anyway to
close the System.IO.StreamWriter object? it seems to stay open when this
happens then future attempts to write to that same path fail because it says
its in use by another process.
> if System.IO.StreamWriter write throws an exception, is there anyway to
> close the System.IO.StreamWriter object? it seems to stay open when this
> happens then future attempts to write to that same path fail because it says
> its in use by another process.
The finally-block has been invented for this (untested):...Retrieving email ids into drop down box in outlook 2007 add-in
I am working on MS outlook 2007 add-in project using Visual studio 2008,C#.
I am trying to retrieve all email accounts( which were I set up in outlook)
into one dropdown box. May I know how to get this application....
...setting up default checkbook ID's
When I navigate to: Transactions>Financial>Bank Deposit> ...I have to always
select the checkbook ID. How do I default it to a particular checking account?
The only way to do this is either using VBA or Dex.
(Available for outsourced projects)
Posted At: Monday, November 28, 2005 12:10 AM
Posted To: microsoft.public.greatplains
Conversation: setting up default checkbook ID's
Subject: setting up default checkbook ID's
When ...Event ID 7888
I have Project Server 2007 with SP1 (Version: 12.0.6219.1000)
Recently my server has started showing the following error message. Nothing
seems to be fixing this problem. Please help...
Event Type: Error
Event Source: Office SharePoint Server
Event Category: Office Server General
Event ID: 7888
Time: 5:13:15 AM
A runtime exception was detected. Details follow.
Message: Thread was being aborted.
System.Threading.ThreadAbortException: Thread was being aborted.
Microsoft.Office.Proj...Multiple Selection of Objects in CFormView
I've written en objects editor(on CFormView).
Now I need to apply Multiple Selection feature to my appliation, also I need
to supprot draggin selected objects, change thier properties, delete etc.
I need your advices on how to do that, also sample project will be gladly
Regards and Thanks,
First, you have to have a selection mechanism. So you need to have a way of detecting if
the mouse is clicked down in an object. I can't tell you how exactly to do this, because
it depends on what you define as an "object".
However, we can assume that you ha...insert category Id into Items table
Can some please help me how to insert the ID from Category and Department
tables into the Items table. I have the does some one have the correct SQL
can u explain it further?
> Can some please help me how to insert the ID from Category and Department
> tables into the Items table. I have the does some one have the correct SQL
> for this
> Thank you
...ID-2036 Details: The files or Directory is corrupted & unreadable(
The Operation failed since DPM was unable to access the file/folder
on **********.com. This could be due to the file/folder being corrupt or the
file system on the volume being corrupt. (ID 2036 Details: The file or
directory is corrupted and unreadable (0x80070570))
See if you are able to open (double click-> open) the xls file in question.
The error code indicates that the file is corrupt.
This posting is provided "AS IS" with no warranties, and confers no ri...find entry where id doesn't have a certain entry in another field
I need help with a query. In a table each id can have more than one
output_device, but must have at least an entry for 'RECS'. How can I identify
id's that don't have an entry where output_device = 'RECS'? Example, id of
567 is ok, but I want to get id 459 because it doesn't have an entry for RECS:
Thanks for any ideas!
[your_table] AS A
LEFT JOIN (
SELECT DISTINCT id
WHERE output_device = 'RECS') AS B
...DPM2010 installation fails with ID: 820
I have installed DPM2010 several times now without any problems.
The past 5 installations have all gone wrong however and all fail with the
same error. I cannot figure out what I am doing wrong.
My server is a Windows 2008 R2 server with 4GB of RAM and a few local disks.
Because the previous installations went wrong, I reinstalled the OS, did a
Windows Update and made the machine a member of a Windows Server 2008 R2
The DPM installation starts out fine and accepts the configuration. It also
installs SQL Server 2008 without error. Fairly quickly after the Data
Prote...Setting CStatic object Bacgroung color!
I have a frame built using CStatic.
How can i set the color inside my frame. I do not like the gray color.
Thank you in advance
>I have a frame built using CStatic.
>How can i set the color inside my frame. I do not like the gray color.
Have you tried handling the WM_CTLCOLORSTATIC message?
MVP VC++ FAQ: http://www.mvps.org/vcfaq