Exchange Goes Down at Same Day and Time
We're having a provblem with Exchage 2003 that eludes all of us.
Every Tuesday, sometime between 4:15 and 4:30, all of our Outlook and OWS
clients lose connectivity with Exchange. We reboot the server and it will
stay up for about 10 to 15 minutes and go down again. It will do this 4 to 6
times and then stays stable until the following Tuesday.
There are no events in the log. A scan for viruses being up nothing. Any
ideas what can cause this?
Any UPS or Power issues with your network? Can you ping the server by FQDN
when outlook clients lose connectivity?
John Oliver, J...Word 2000 as Email Editor for Outlook 2002
I have just upgraded to Outlook 2002 software and I am
trying to use Word 2000 as my email editor but under
options it does not allow me to select Word as the email
editor. Is there a patch to make this work?
Check "Use Microsoft Word to edit email messages"
Reply address is set to vaporize - don't expect a reply!
"email@example.com" <firstname.lastname@example.org> wrote in
> I have just upgraded to Outlook 2002 software and I am
> tryin...Out of Office not working Exchange 2003
I have an Exchange 2003 server, and have set the Internet Message
Formats properties to allow Out of Office responses, restarted the SMTP
and Exchange Routing Engine services, but it still won't send the Out
of Office message to outside recipients. I even set the Allow
automatic replies to on, just to see if that will work, but it simply
Any ideas on what else I need to do? A client really needs to get this
working on his server, and I can't even get it working on mine.
There are only 10 types of people in the world;
those who understand binary and those w...Exchange to Redirect email for its own domain ?
Is it possible that Exchange 2007 that is configured to catch email for
domain1 and has all the mailbox there 'redirects' some of the mails that
arrive for a specific account to another external MTA?
I know this can be done in a domain basis, but can it be done in an account
You can create mail contacts for addresses you want redirected.
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
"Christian" <email@example.com> wrote in message
news:52553999-A6A2-4866-A26A-BC0C644A31D9@microso...what are Headquarters limits when it comes to number of stores??
Does anybody know what the "theoretical" limits of headquarters are? A retail
chain has aksed us if they can run 150+ locations.
I don't see any limits if we wanted to run that many store operations, but
the problem we see is when we have this many stores and how do we centralize
If Headquarters IS limited, what are some possible solutions and workarounds?
Theorectically there are no limits with HeadQuarters, but with 150+
locations you may want to rethink having one central HQ. Having Regional HQ
Locations may be a better bet, easier to manage ...Exchange stopped responding
Error message in OWA: OWA was unable to get your inbox.
Also cannot connect to Exchange using Outlook or Outlook
All Exchange services running. No errors in Event Logs.
Recent update to Windows 2000 DC (was NT 4 PDC).
Every morning, I have to reboot the server, then all
works fine until the next morning. Any ideas?
And version of Exchange is ... ?
> Error message in OWA: OWA was unable to get your inbox.
> Also cannot connect to Exchange using Outlook or Outlook
> Reboot fixes.
> All Exchange services runn...changing tcp port used by exchange 5.5?
We are trying to find out if it is possible to change the tcp port that
exchange 5.5 uses to send outgoing (internet bound) emails?
specifically, we are trying to have our internal exchange 5.5 server send
all outbound emails to our unix based/postfix server using a port other then
I have search both technet and google but seem to only find articles
relating to inbound or client based issues.
can you point me in the right direction/tech article?
I have to admit I don't know if this applies to 5.5, but maybe it'll help if
it's somewhat similar. This is how it'...How do I calculate and store results? 01-27-10
I have a Form with a QTY field and a field AMOUNT_TAKEN.
I need to have the AMOUNT_TAKEN subtracted from QTY when I click on a
Calculate Button and also have the AMOUNT_TAKEN field cleared.
How do I do the update of the QTY with a query and store it for further use?
I have a Table with both QTY and AMOUNT_TAKEN fields
Joe Leon -
Bring up the Properties for the form. Set the RecordSource to be the table
that contains your data.
For each of the two fields on the form, make sure the Control Source
property is the associated field from the table. This will take ca...Only 2000 characters in CRM 1.2?
I have using MS CRM 1.2 and we seem to be limited in the notes section
for Phone calls and letters to 2000 characters which we find VERY
Is there any way around this at all?
> I have using MS CRM 1.2 and we seem to be limited in the notes section
> for Phone calls and letters to 2000 characters which we find VERY
> Is there any way around this at all?
...how to change range for dynamic chart in excel 2000 with button?
i need a help please.
i have problem in excel chart. i add data to the table.
and then if i want to update my chart i need to change the range too, isn't
is there any solution for that? i've already use dynamic chart. but it always
show data from Jan04 till Jan05. If I add Feb05 it will change from Feb04 to
what about if i want to see Dec03 till Dec04? is there any command or
something else like using macro or vb? thank you in advance..
You should be able to set the dynamic chart to show just about any range you
want. These articles should help:
http://pu...select all for check box..
I have a check box field in a continuous form... name is mCheck
I want to have a command button Select All such that when clicked, all check
boxes in the continuous form would be selected...Thank you..
Message posted via AccessMonster.com
A continuous form would display a set of records. Are you saying that you
want all the records in the set marked with a check-mark?
If so, one way to do this would be to run a query via code behind the
command button that updates the field underlying the checkbox in a...exchange 2003 testing
My exchange 2003 trial has expired. I have the release version which I
Can I install as on update and not loose the data? If not, can I go in and
backup the date to PST files?
On Thu, 5 May 2005 13:56:37 -0400, "jjk" <firstname.lastname@example.org> wrote:
>My exchange 2003 trial has expired. I have the release version which I
>Can I install as on update and not loose the data? If not, can I go in and
>backup the date to PST files?
&...Email BenchMark for Exchange ?
how to measure the Exchange/Email Performance of a production platform ?
I don't LoadSim is not a good option for production Exchange.
"martin" <email@example.com> wrote in message
> how to measure the Exchange/Email Pe...How to update the data of a combo box
In a form I have tab pages
One is for consultation data it is a subform link to consultation table. The
other page is Examen subform in which you have a combo box that will list the
consultations of a client.
The problem is when I add a new consultaion record for a client it does not
appear in the list. I have to select another client and then come back to the
preveous client to see the new entry.
For this combo I run Me.my_combo_box.requery on the current and load event.
Somehow this does not refresh or update or ??? my list.
What should I do ?
...delete old exchange server from AD
Exchange System Manager shows two servers - one of which no longer exists.
Now I can't remove the old server, because it does not exist! (I get the
error message shown below)
Just to be clear: the old exchange server hardware is gone. I cannot
uninstall the old exchange server because the hardware is gone. I can't
connect to the old exchange server because the hardware is gone.
My existing exchange server is still trying to replicate to the old exchange
server which no longer exists.
Presumably the information is held in Active Directory. How do I tell my
Exchange server not...how do I link a text box on a chart to a specific data point?
I have a text box in a chart that I want to move with the data, as additional
data is added to the chart. For instance, if the datapoint is January 5,
2008, as I add additional days, I want the text box associated with the
January 5, 2008 datapoint to move with the graph.
Text boxes don't track with the data. Replace the text box with a Data
Label. Select a single point in a series that is near the location of the
text box. Choose Format, Selected Data Point, on the Data Labels tab turn on
Value. Click OK. Select the data label and type the text that was in the
Text box. ...Exchange 2003 Forms Logon
I am trying to have exchange 2003 view forms when using the webmail client
to logon, I set it to use forms in exchange system manager, but upon
login.... no forms :/ just a dialog box to logon...
Can anyone help?
thanks alot in advance
Rudi Groenewald wrote:
> Hi there....
> I am trying to have exchange 2003 view forms when using the webmail
> client to logon, I set it to use forms in exchange system manager,
> but upon login.... no forms :/ just a dialog box to logon...
> Can anyone help?
I guess you mean Forms-based Authentication? Are you u...Unable to open Exchange Systems Manager
When I double-click on the ESM on the desktop. I get the following error
Error Message 1:
The system cannot find the file specified
ID no: c007002
Exchange System Manager
Error Message 2: (This message appears after clicking on OK from message 1)
Microsoft Visual C++ Runtime Library
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Running Exchange 2003 with Windows 2003
"=?Utf-8?B?TWlrZSBDaHVuZw==?=" <MikeChung@discussions.m...Exchange 2k rights problem
I am a novice in regards to Exchange but have now inherited a Exchange 2k
I am in the process of migrating from Win2k servers/AD to win2k3 Domain. As
I have a more knowledge of Exchange 2k3, i want to migrate everything
including the mail server to 2003.
In doing so I have come across a problem with the Win2k exchange server. I
can not assign rights. Domain admins and administrators are denied and this
in inherited. The problem is that I can not find the account which has set
the rights, when I go to the security tab I get the message " unable to
display security infor...help with combo box display...plz...
i have a multicolumn combo box...with columns FName, MName, and LName...how
can i enable it to display the 3 values of the column when a row is selected??
it's like that i'm merging the 3 values int the text box display of the combo
On Fri, 20 Apr 2007 08:30:20 GMT, ai_enjoi wrote:
> i have a multicolumn combo box...with columns FName, MName, and LName...how
> can i enable it to display the 3 values of the column when a row is selected??
> it's like that i'm merging the 3 values int the text box display of the combo
> box......Can I migrate my old Exchange 5.5 from NT4 to 2003 server?
Totally have no idea about how to do it. Any tips, please.
Thanks a lot
Exchange 5.5 will not run on Windows 2003. Exchange 5.5 will run on Windows
2000. The only version of Exchange that will run on Windows 2003 is Exchange
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup.
Use of included script samples are subject to the terms specified at
"yuner" <firstname.lastname@example.org> wrote in m...Blocking .zip files
Is there any way to block certain extension files (besides the 66+ already
blocked by default) on Exchange 2000 or should I use the server anti-virus
settings for that ?
use your AV...
"Marlon Brown" <email@example.com> wrote in message
> Is there any way to block certain extension files (besides the 66+ already
> blocked by default) on Exchange 2000 or should I use the server anti-virus
> settings for that ?
You can either have your Server Exchange Aware Antivirus program do this or
I have been sugge...Rename Exchange MBX Folders
How do you rename folders in the M: drive?
Ex. Inbox to Bandeja de entrada.
Ive tried using the Exmerge.exe program, however it
The M: drive is a virtual drive. Pretend that it doesn't exist. Do not
interfere with it. People have corrupted their information stores when
playing with the M: drive.
For Exchange news, links and tips, check:
"alonso" <firstname.lastname@example.org> wrote in message
> How do you rename folde...unable to open information store
After a recent power failure, where the exchange server was not shut down
properly and just died, I now have users, that used to be able to open other
users inbox to read the emails, now not able to open these inboxes.
the message is unable to open information store.
The same also applies to callenders, but this is not happening to everyone,
as I can still access other peoples folders.
...Lock text box
How do you lock the position of a text box in Publisher 2002?
You don't - but don't take it personally, neither does anyone else :)
The closest technique I know of is to create a separate Master (if it's
something that isn't to appear on multiple pages), put the element on the
"Angela" <Angela@discussions.microsoft.com> wrote in message
> How do you lock the position of a text box in Publisher 2002?
What do you mean? Is your textbox moving o...