Relay

I am getting thousands of what looks like smtp relay 
messages in my IMS outbound queue. This is exchange 5.5sp4 
with "require authentication" to relay checked in the IMS 
setup. Would anyone have any tools or procedures to find 
the source of this? Thanks
0
anonymous (74722)
11/21/2003 10:58:18 PM
exchange.admin 57650 articles. 2 followers. Follow

0 Replies
424 Views

Similar Articles

[PageSpeed] 37

Reply:

Similar Artilces:

#5.5.0 smtp;550 unrouteable address #5.5.0 smtp;554 Relay access
I have been getting misc. NDR's and am not sure what is causing them. The wierd thing is is that they are coming from a mail server in the UK. I am in the US and the users that are sending emails are SOMETIMES getting the following NDR's: There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. <sgiuk2k3mail1.spectra-gases.com #5.5.0 smtp;550 unrouteable address> Vendors.Spectragases%SPECTRANETICS@spectranetics.com on 6/20/2006 1:52 PM There was a SMTP communication problem with the r...

mail cannot be relayed.
One of my user try to send mail to one of our clients but he recieves the error The following error message appears : From: System Administrator Sent: Monday, June 07, 2004 11:08 To: abc@xyz.com Subject: Undeliverable: Test Message. Your message did not reach some or all of the intended recipients. Subject: Test Message. Sent: 07-Jun-04 11:06 AM The following recipient(s) could not be reached: abc@xyz.com on 07-Jun-04 11:08 AM You do not have permission to send to this recipient. For assistance, contact your system administrator. <ex-fe...

Relaying by Host Name
I want to allow access for a server to relay via my exchange server. I want to allow him access via hsi host name instead of IP. Any ideas how can I do this? Thank you in advance. I have never tried it, but it seems like you should be able to use the domain option, just put in hostname.domain.com. The only down side is that your server will have to do a nslookup on every relay attempt. "WILDPACKET" wrote: > I want to allow access for a server to relay via my exchange server. I want > to allow him access via hsi host name instead of IP. > > Any ideas how can...

not permitted to relay???
I have windows 2003, exchange 2003, sp1 and i have a problem with this domain (andinanet.net) that in some cases show the next message: ----- The following addresses had permanent fatal errors ----- palban@ciudadceleste.com (reason: 550-srv8.andinanet.net [200.107.9.10] is currently not permitted to relay) ----- Transcript of session follows ----- ... while talking to ciudadceleste.com.: DATA 550-srv8.andinanet.net [200.107.9.10] is currently not permitted to relay 550-through this server. Perhaps you have not logged into the pop/imap server 550-in the last 30 minutes or do not have SMTP ...

Exchange SMTP Relay Export list ipsec.vbs
Is there a way for me to export the results of the echo to a text file? I am running the following command which works to show us who is allowed to send email through our Exchange Server. ipsec.vbs -s NAMEOFSERVER -o e -r relay -d DCNAME I tried to use this: ipsec.vbs -s NAMEOFSERVER -o e -r relay -d DCNAME >RelayList.txt and the file is created but it is empty. Any help is greatly appreciated. Kevin Have you tried running cscript /nologo ipsec.vbs -s NAMEOFSERVER -o e -r relay -d DCNAME Otherwise you will have to look at the VBSCRIPT and add some code to output the results to tex...

Open Relay Problem Still?
Hi, Our ISP closed off our outgoing mail today from our Exchange 2003 on SBS2003. Somehow the server has become an open relay, i thought this was solved? I noticed in the log not long ago some bogus addresses but i didn't understand fully what it all meant. I need help on how to rectify this as soon as possible. Regards Chris White Stirling Technical Engineering Ltd. Microsoft Partners Check MS KB article 300580 to get you started. Chris White - Stirling wrote: > Hi, > > Our ISP closed off our outgoing mail today from our > Exchange 2003 on SBS2003. Somehow the ser...

use fixed relay?
hi i'm guess i'm just missing something obvious, but how/where can i configure Exchange 2003 to use a single fixed SMTP relay server (with SMTP AUTH) to relay all outgoing messages to? i'm running the exchange on a network with a dynamic ip, and just lately it seems that every second recipient has black-listed our dial-in provider's (it's only the largest provider here in germany ;-) ip range. so i'd like to run all mails thru a relay i have on one of our servers on "proper" IP addresses, to avoid this issue. any pointers? thanx! -- marc hoffman RemObject...

Problem With possible open relay on SBS2000 w/E2k
Hello, I have run into a strange problem on one of my clients servers. They have a Windows Small Business Server 2000 with Exchange running. When the server is on the network the whole network's access to the internet is almost NULL. It runs slower than 56k. When I disconnect the server from the network it runs like lightning. I noticed that when I shutdown the exchange services everything works great but as soon as I start them the problem begins again. More specifically I shut down the services one by one and noticed the problem stopped after I stopped the SMTP service and Information ...

Relaying mail not allowed
I am not sure if this question should be posted here, so forgive me if this is not the right place. I keep getting a message back every time I send out e- mails from my account. (This just started. Everything had been working fine for a long time.) The message says - FROM: System Administrator - The following recipient(s) could not be reached: NAME OF E-MAILED PERSON | DATE | TIME 550 relaying mail to NAME OF E-MAILED PERSON is not allowed. I am puzzled. If anyone can help, I would surely appreciate it. Mary Contact your ISP - you probably need to authenticate to their SMTP s...

Exchange 2000 and Relaying
Well I have a fairly new Exchange 2000(1 month) install. All of a sudden in ths last week I have noticed my disk space getting smaller. After further investigation my Bad mail folder and the Queue folder are both filling with messages. If I look at some of the messages in the bad and que they are the famous spams(Viagra and all them nice emails). They are coming in from my SMTP Virtual Server. I looked in the properties and have no computers allowed to relay. The check box is checked that allows computers to relay who successfully authenticate. I have all 3 boxes checked in the authenti...

Check queue on mail relay server?
Hi! I have a separate server to relay my e-mails to the outside world. The problem is that I can't see the queue on that server like you can if you have Exchange installed on it. Enviroment: Mailserver: Win2k Server with Exchange 2000 Relay: Win2k server with SMTP relay Reg J�rgen Persson Look for the Queue folder that is under the webroot I believe. there is no graphic user interface that you can view this with. You must view the folder where it is stored. this will show the e-mail in queue. if look around you can also find a bad mail folder that you might want to look at ...

Unable to Relay 550 5.7.1 for replies only!
W2K3 Server and E2K3 Ent. server Fresh installs. Recipient policies for our Internet domains with the appropriate ISA settings. All email leaves our domain with no SMTP issues to anywhere outside. Internal email works. Outlook 2003 configured to use E2K3 as default. When replying to an externally received email: Throws Event 7010: MSExchangeTransport (Logging is on) This is an SMTP protocol log for virtual server ID 1, connection #9. The client at "10.0.10.100" sent a "rcpt" command, and the SMTP server responded with "550 5.7.1 Unable to relay for info@outsidedom...

I need to relay
hi (exch 2003 and xp pro) i need to relay through another server as my server does not do it properly and it is hindering communication (because some mails does not reach the recipient). where in the setup do i change the servername to relay through???????? thanks guys. in the meanwhile i'll be trying to lookup anything on the net Craig Hi, What do you mean that mails are not getting through? What error do you have? I would setup the exchange server to do the job right, rather than start using a new smtp server. If you want some tracking enable mail tracking and try using the mes...

How Do I Correct a 550 relay error in Outlook 2007
I have done everything that my ISP has suggested. I can send e-mail thru my web site but outlook will not accept / send mail "Bayouceff" <Bayouceff@discussions.microsoft.com> wrote in message news:6A01BB71-D46A-4B2D-B030-74628DD66562@microsoft.com... >I have done everything that my ISP has suggested. I can send e-mail thru >my > web site but outlook will not accept / send mail Tools - Account Settings - select account and click Change - More Settings - Outgoing Server, check My outgoing server (SMTP) requires authentication and select Log on to incoming mail s...

aol relay problem
I recently obtained a static public ip address and can send and receive mails externally through exchange smtp. However when I try to send an email to an AOL.COM address, I get 'delayed delivery' in the outlook client. After some hours, I get 'undeliverable' In article <e33cza$3GHA.1608@TK2MSFTNGP04.phx.gbl>, anand.narine@gmail.com says... > I recently obtained a static public ip address and can send and receive > mails externally through exchange smtp. However when I try to send an email > to an AOL.COM address, I get 'delayed delivery' in the ...

Server is Open Relay despite default reccomended configuration...
Hi all, Today I was surprised by the news that our server is listed in open relays lists. I have checked the configuration and all is configured as stated in http://support.microsoft.com/default.aspx?scid=KB;EN-US;324958#3, but the server continues to be open to relay. The test applied was the same is reccomended on the above article. The only way to avoid open relaying is by unchecking the checkbox "Allow all computers which successfully authenticate to relay, regardless of the list above". But this checkbox microsoft reccommends to stay checked. What can be wrong? What can be...

Incoming Email Problems (550 5.7.1. relaying denied)
Good morning, I'm having problems with incoming email to my network. Mail coming to my exchange 2003 server seems to get stopped somewhere, but I'm having trouble tracking it down. I discovered the problem when users on my network were being removed from mailing lists due to undeliverables. I recently found out that they are later getting notifications of this saying "550 5.7.1. <user@ourdomain.edu>...Relaying Denied." Its not ALL incoming email thats getting stopped, but mostly newsletters, etc. I've also noticed I'm not getting my online bank statements ...

"550 5.7.1 Unable to relay" TO external domains
Hi together, I have a big problem to send to any recipient which has an external domain (outside of Exhange organization). I deployed Exchange 2003 + SP2 based on Windows 2003 AD. - Installation of Exchnage is a default installation. - Default recipient policy exists. - There is no restriction to send mails. - Only SMTP VS1 is used to send mails. The users on Exchange server cann send mails internally without any problem. BUT if they send any mail to an user who has an external domain address, they get the following error: "550 5.7.1 Unable to relay for username@externaldomain.com&q...

Strange relay issue
Hi, We got a exchange 2003 sp1 set up on our server, last year i added a new email domain to it( next to the 2 domains we already hosted ) , and people are able to contact us from the outside on that domain by using that domain emailaddres.. Now we have an issue with using those same adresses internally. We got some new printers that have a scan-email function and it uses the ldap adress list. In those list email adress is name@domain.com ( from the newly added domain ) , but it gets an error, but to be able to see it i configured my laptop to the same ip and set up an smtp session m...

Unable to relay #2
I added a new domain to the recipient policy and everything works fine if I send mail to it from the server itself but when I try to sent from an external e-mail address it comes back with the "unable to relay for newdomain.com" message. Why would that be? The server is running Exchange 2000 with all the latest sp's and updates. The mailbox that I'm sending to lives on another server running Exchange 2003 (+latest updates) that's in the same routing group. Port 25 on the 2K3 system is not open to the outside world so all mail for mailboxes living on the 2K and ...

Unable to relay
I have two exchange boxes in my organization. I recently changed the outside ip on one and changed my mx record for this. I can recieve/send on the one that didnt change fine. On the one that changed, i can recieve but not send. When i telnet to port 25 from the outside, i get 550 5.7.1 Unable to relay for error. It all was working fine before the switchover. All the boxes for allow all computers that successfully authenticate to relay are checked on both servers. There is no other factors. Could this be the new isp providers error. Sounds more like an internal issue since my mail is n...

Mail Relay Question
I have ek55 and ek23 co-existing until I am ready to remove the 5.5 server. I have the 5.5 server relaying to another server which handles spam filtering. I created an smtp connector on the ek23 server a few weeks back which has the same cost has the 5.5 connector. My question is I want the ek23 server to relay to this same server. When I configured it on the connector and tried to send mail, I got a bounce-back telling me stating that the server was unable to relay for the intended recipient (my personal account). How do I configure mail relay to this other server to work properl...

Unable to relay through SMTP connector
Running Exchange 2003 SP2. I've created an SMTP connecter, specified two Exchange 2003 SP2 servers as bridgehead servers and configured the address space as *. I've restared the SMTP and routing service on both servers. When I telnet to either of the specified bridgehead servers and try and send mail from mycompany.com to gmail.com I get "Unable to relay for.." I've got a recipient policy configured for mycompany.com as well. Why are these servers seeing mail from mycompany.com to the outside world as an attempt to relay? because it is relaying. :-) Anonymou...

Shut off the auto relay & Change Wallpaper
I need to change some settings within outlook. I used a MST to capture a Outlook 2000 configuration. I setup all machines using a Admin install. I want to turn off the relay option and change the wallpaper. Both options are disabled, I want to turn them on. Could you help me Please. ...

Sending Mail Relay Problems
Hello - I need to travel a lot and have problem with sending email when I change ISP's. I always get the "550" error - not a gateway. Can anyone rercommend a good local SMTP server that I can install on my laptop to solve this problem? Thanks YOu just need to change your settings on the properties of your mail account to match the ISP you are using while travelling. Usually, just setting up authentication to the outgoing server is sufficient. --� Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion intact. Due to the (insert latest virus n...