I have an Exchange 2007 server, and the SMTP Send Connector points to one of
our two SmartHosts. I'm looking for a solution that provides resilency with
the second SmartHost if the first fails for whatever reason.
When looking at the Send Connector properties, I can add additional
SmartHosts on the Network tab.
To provide resiliency, is it as simple as adding the second SmartHost?
Therefore, email will route to the available SmartHost.
On Wed, 31 Mar 2010 16:34:49 -0700, GoTrojans
>I have an Exch...Restoring Exchange 2003 Cluster to single server ????
We are testing Exchange 2003 in a disaser recovery test.
Our live system runs 2 node Exchange 2003 cluster.
We are planning a recovery to a single Exchange 2003 server with same name
as the Exchange 2003 cluster in a test environment from tape backup.
Has anybody every tried this befoe or can this be done ??
Help on this is much appreciated
This is perfectly possible, since you're only restoring the database files.
Just make sure that the name of the organization, name of the administrative
group, logical names of the storage group and stores are identical to the
ones used in y...Using exchange server 2003 as an smtp server outside of the domain
For the life of me I cannot figure out how to setup exchange server as
an smtp server so that I can use it to send mail from outside of its
basically i want to be able to send email from any computer not on the
domain by using mail.mydomain.com . I'm not sure if the issue is
actually related to something on exchange server 2003, or if it's DNS
related issue. we do use OWA so wthat when we type in a web browser
mail.mydomain.com it takes us to OWA.
Right now if I try setting up a POP3 Account in Outlook and use
mail.mydomain.com for incoming and SMTP servers it err...Exchange problems after reboot
I'm having trouble with Exchange 2003 (Ex2003 SP2 running on Windows Server
Every time after reboot Exchange don't start correctly. I have a "8231
MSExchangeAL" and "8247 MSExchangeAL" errors in application log. Also the
Exchange Information Store fails during startup and the Exchante MTA Stacks
too. After reboot when I log on to server I can start those two services
manualy and everything runs fine, so I'm little (or much) confused.
I didn't have problems with reboots before.
I have checked KB 27529, KB 286356 and few others and ...Publisher 2003 Stlyes and Formatting
why does a selected Style revert to a default font after I close and then
reopen my document?
No, if you answer Yes that you want to save the changes.
"janep" <email@example.com> wrote in message
> why does a selected Style revert to a default font after I close and then
> reopen my document?
...Child domain users and Parent domain Exchange
I am feeling pretty lame right about now.... Can Child Domain users use
Exchange in the Parent domain? IF so, how? If not, do I need to install
exchange in the child domains too? What would be the best way to do it?
On Fri, 10 Feb 2006 12:29:51 -0800, "Dan Klinge"
>I should add that there's a VPN connecting the two domains. domain.com
Run domainprep in the child domain.
Set up Domain RUS pointing at a local DC in that domain.
>"Dan Klinge" <Dan.Klinge@NOSPA..."ch" in XP Word 2003?
Using Word 2003 in XP Pro Sp3. Formatting paragraphs includes setting of line
starts and separations (vertical). All page settings are in mm, but in
Formatting, they read in values which likely seems to be in inches, followed
My question is: What does this "ch" mean? And secondly, how can I get
changes written in mm to remain in mm? They seem to always change back into
an inchlike measure followed by "ch".
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Al...Dynamics CRM 4 without Exchange but with Lotus Domino
I'd like to know if in Dynamics CRM v4 you need exchange to route the
incoming mail to the queues, because I have heard that in version 4 you don't
need to have exchange server.
We have Lotus Domino as email server and we'd like to get the incoming mail
via E-mail Router Configuration Mnager in Dynamics CRM v4.
I don't know if these steps are correct:
1. Create two profiles (one for incoming mails and one for outgoing mails)
2. Create a new deployment to connect with dynamics CRM server.
3. Load Data.
4. Modify the incoming or outgoing profile for a user or que...money 2003 will not open
I am trying to install money 2003 on a dell 933 desktop. I can get every
other program in the works programs to work, (encarta, word etc but not
money - it keeps getting that error report message and then if I try to
start it it still gives me the error report-i have unloaded and reloaded
several times-I have run regclean, regvac system mechanic etc to no avail.
the error signature is AppVer 126.96.36.1996 ModName:kernel32.dll
ModVer 5.1.2600.2180 Offset:0001eb33
I found the answer to my question - it was a registry problem that required
me to run : regsvr32 c:\wind...Exchange 2003
Windows 2003 server with Exchange 2003 SP2
This is a very strange problem. I have one user who turns on his out of
office assistant and the out of office messages are not sent internally or
externally. All other users use out of office and the messages are sent
properly both internally and externally. I have the option configured to
allow this (http://support.microsoft.com/default.aspx?scid=kb;en-us;262352).
I can't for the life of me figure out why this one user is having this
problem. Everything appears to be configured for that user exactly the same
as all the other users who ar...Bug in excel 2003
I'm trying to get an equation of a table of data.
When I enter the data, make a graph of it, I get a nice sinus-kind-of-line.
Therefor I would like to have fourth order equation.
The line of data looks very good (125 data points).
Then I add a trendline (4th order) that looks like a very nice fit.
But when I set the properties of the trendline to "show equation in graph"
the a wrong equation is displayed.
After a lot of fiddling with data, I noticed that the shown equation has
wrong contstands showing.
The shown eqaution = A + B*X + C*X^2 + D*X^3 + E*X^4
In fact ...Exchange 2003 SP1 Includes April Rollup Fixes?
Can I assume this is the case?
...MS Exchange Server Unavailable
I have multiple users who start Outlook 2000 and they get
the message " Exchange Server is Unavailable...." With the
options to Retry or Work Offline. They are all connected
to our network and when they select retry, Outlook
immediately opens. I have searched and searched and I have
mot been able to find any references to this problem. Any
assistance would be appreciated.
Sounds like a name resolution problem. Make sure your internal DNS is
Ben M. Schorr, OneNote-MVP
**I apologize but I am unable t...Time formats in Excel 2003
Being in the UK, I obviously want to use the English(UK) date format, so
Christmas Day is 25/12/05 rather than 12/25/05. However, this defaults
the time format to hh/mm/ss (why, I do not know, since I can assure
American readers we're not normally that precise), so I have to reset it
English(US) to get hh/mm, which resets the default date format to
mm/dd/yy, so I have to change it back the next time I want to format a
cell as a date.
Any way round this? It's only a minor problem but it's irritating me.
If you set up your own custom format with hh/mm, it w...Excel 2003, when I click on a particular cell it gets deselected
While using Excel 2003, when I click on a particular cell, within 30 seconds,
that particular cell gets deselected followed by the workbook. So each time I
need to click either the cell or workbook to enter data in that particular
There could be event code that is being fired. Does this happen if you open the workbook with
MS Excel MVP
"towinwin" <firstname.lastname@example.org> wrote in message
> While using Excel 2003, when I click on a particular cell, within 30 se...Exchange 5.5 ims connector
My Exchange 5.5 IMS connector queue shows messages that
have <> as originator and also shows email with valid user
account in this manner <user name>. My question is the
emails <user name> valid emails from exchange users.
I don't know just based on that but you could check the actual email message in \imcdata\out and pull up the appropriate message in notepad.
...need to retrieve recently deleted email in live mail
How can I retrieve mail that was accidentally deleted before it could be read?
Open the "Deleted Items" folder under the affected account.
Windows 7 Ultimate
"manspirit1" <email@example.com> wrote in message
> How can I retrieve mail that was accidentally deleted before it could be
If it is(was) a Hotmail type account(Hotmail.com, Live.com, Msn.com) using Pop3 and the message is not in your ...Money 2003 #43
I have installed Money 2003 after having used Money 99
for three years. I use Money to print my checks each
month. Now with 2003, I get no highlighted "print
checks" icon, so, printing is impossible. I've tried
reinstalling Money 2003, but it still doesn't work, and I
can't get 2003 off my computer.
What to do?
See if http://umpmfaq.info/faqdb.php?q=91 helps.
"John" <firstname.lastname@example.org> wrote in message
> I have installed Money 2003 after having used Money 99
> for three y...Exchange design
Please help with following scenario
Set up: Company has a nation-wide Sendmail server that only does POP3 for
every branch office in the nation, domain is us.company.com. One branch
office decides to deploy SBS/Exchange internally for that office.
Problem: internal domain is company.local, recipient policy has
us.company.com for mail delivery. Everytime an employee from that office
tries to email someone else who is outside of that office that piece of mail
gets dropped (because AD user does not exist and because Exchange now handles
us.company.com) How would I be able to make it so th...Subject Line in Outlook 2003
In my OL2003 the middle pane of the main view shows my Inbox where all
messages are listed. It shows the sender, the time when the message was
received and the file size.
How can I customize this to include the subject line as well?
If you use right click on Arranged By, what do you show as the active view?
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to my personal
account will be deleted without reading.
After searching google.groups.com and finding no ans...Outlook 2003 #141
I am using outlook 2003 at home to access my Pop3 mail
account with Southwestern Bell. The issue I am having is
that whenever I hit the send and receive button it
continually pops with a logon information box. I can
click ok past this and watch the send and receive
progress in the lower left corner. It will go a few more
% then the box pops up again and again until it finally
finishes the send/receive. It will then have an error
that my username and password maybe wrong. I have
confirmed with SBC that everything on my end is correct.
I can log onto there website and retrieve my...UK -> CANADA / Money 2001 -> 2003
I am running the UK version of Money 2001 small business
on my pc and would like to keep maintainnig my UK business
and private records in this.
I have recently moved to Canada and would like to start
using Money for my Canadian affairs, this ofcourse is not
possible in the UK version so I will need to aquire a
Canadian version of Money 2003 for this purpose.
Can the Money 2001 UK version co-exist with the Money 2003
Canadian version, without creating conflicts with files
...Exange 2003 Server Administration
I am finding it difficult to delete a previous exchange
server from the servers Folder under the First
Administrative group. The Mail and Public Folder stores
are both disabled and I want to delete it.
...Outlook 2003 Upgrade Kept Old PST File Version, How to Fix?
I just upgraded a client to 2003 because of some issues with the PST file
size in his Outlook XP (it crashed as he exceeded the 2GB limitation by
about 200MB!). Anyway, the upgrade kept the file as a 97-2002 PST file
which still has the 2GB limitation. I created a new data file that is the
new version and was able to recover the other PST file, but I can't get
Outlook to make that the default Outlook folder. I could move the email
delivery to it, but not have Outlook open this file. I tried renaming the
default PST to see if Outlook would then prompt me for a data file, but it
wouldn...Dexterity Components & GPConnNet.dll
Greetings & thanks in advance for taking a moment to review my issue.
I am attempting to deploy SP3 for GP 10 on a number of my workstations. We
don't allow users to operate as local administrators, so the standard process
to push updates via MSP packages doesn't cut it for us.
My typical process is to build the standard MSI installation image using the
tools on the GP installation DVD, deploy that package via Group Policy as a
base installation, then use a few additional custom MSI packages for little
tweaks (copy an updated dictionary file, put shortcuts where my users wa...