Migrate from Goldmine 5.0 to Exchange 2003

Has anyone had any experience with this?  I am wanting to move history, 
the shared contacts, shared files etc.  Any information would be greatly 
appreciated.
0
3/8/2005 8:32:00 PM
exchange.admin 57650 articles. 2 followers. Follow

1 Replies
199 Views

Similar Articles

[PageSpeed] 36

Dan Hellebust wrote:
> Has anyone had any experience with this?  I am wanting to move
> history, the shared contacts, shared files etc.  Any information
> would be greatly appreciated.

Check www.slipstick.com for conversion utilities to get the info into
Outlook - if you can get it in there, you can get it into Exchange, most
likely - at least your calendar, contacts, etc. I'm not sure what sort of
shared files Goldmine uses - or if your history can be migrated - Outlook is
not a CRM and neither is Exchange, and Outlook journaling stinks & isn't
centralized/shareable by default.


0
lanwench (7567)
3/9/2005 4:20:35 AM
Reply:

Similar Artilces:

Mailbox on Exchange Front-End Server
Can you create a mailbox on an Exchange 2003 Front-End Server? When you make Exchange a FE server, it then assumes all internet protocols are to be proxied to the BE servers. It can't proxy to itself. If you put mailboxes on it, only MAPI connections could reach them. Depending on your deployment, there may be security implications of allowing that. Can you? I think so. Should you? Probably not. William "John Blake" <anonymous@discussions.microsoft.com> wrote in message news:19f8501c44d87$e00c6950$a001280a@phx.gbl... > Can you create a mailbox on an Exchange 20...

Exporting Custom Security Roles CRM 4.0
Is there any way of exporting custom security roles in CRM 4.0? It appears only the OOB Security Roles are 'exportable'. It only makes sense that customized ones could be exported. I don't have any problems exporting custom security roles. Aren't they listed in the export customizations list? -- Michael H�hne, Microsoft Dynamics CRM MVP CRM Blog: http://www.stunnware.com/?area=blog ---------------------------------------------------------- "Kraig" <kraigr3@gmail.com> schrieb im Newsbeitrag news:9737235c-b921-4d9b-902b-6f5056525fd7@c65g2000hsa.googlegroup...

Configuring Exchange to Use Multiple RCPT TOs for Smart Relay
How do you configure exchange such that a message with multiple recipients is sent to the smart relay as a message with multiple recipients instead of duplicate copies of the message with one recipient each? Thanks, Alan You're talking per-domain, correct? Because Exchange already does this for recipients in the same domain. Baris. -- This posting is provided "AS IS" with no warranties, and confers no rights. "Alan" <msn-exchange@web.morphdog.com> wrote in message news:035d01c3c78f$104e6610$a401280a@phx.gbl... > How do you configure exchange such that a m...

impossible to access the "news" from outlook 2003
I wanted to set-up my newsgroups access In outlook 2003. I followed the documented procedure (toolbar/standard/customize) from the help menu to add the "News" selection to the "GO" menu. It worked but when I exited Outlook and got back later the "news" menu disappeared. I tried to reinstate it following the same installation procedure but the News option is no more available in the "toolbar/customize list". Looks like a bug. Has anybody faced the same issue ? Is there a workaround to access the Newsgroup interface ? Thanks, Laurent conflicts ...

How do I add vertical lines to separate columns in Outlook 2003 #2
In Outlook 2000, all columns were separated by a gray vertical line. I can't seem to set this up in Outlook 2003. Any help would be appreciated ARe you using Word as the message editor? --� Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion intact. Due to the (insert latest virus name here) virus, all mail sent to my personal account will be deleted without reading. After searching google.groups.com and finding no answer, mschwartz asked: | In Outlook 2000, all columns were separated by a gray | vertical line. I can't seem to set this up in O...

UPC Equation #5
Okay awesome. Thanks so much for the help guys. I went with some hidde cells to insert the extra parts of the formula. Now, is there a way t make it apply to each and every field in Column A? and Column B? Thanks -- PneumaG ----------------------------------------------------------------------- PneumaGT's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=1583 View this thread: http://www.excelforum.com/showthread.php?threadid=27326 You didn't mention exactly which formulas you went with, but just click on the fill handle, and drag down to copy as far as neede...

How do I transfer Outlook 2003 to my laptop
Is this possible? I bought Office 2007 Home but it doesn't contain outlook. Outlook is on my desktop. Desktop running windows XP on both computers. Thanks "deborah" <deborah@discussions.microsoft.com> wrote in message news:C3C23711-925C-41F9-A3D1-9B2C24DA6083@microsoft.com... > Is this possible? I bought Office 2007 Home but it doesn't contain > outlook. > Outlook is on my desktop. Desktop running windows XP on both computers. > > Thanks Find the disk from which you installed Outlook onto your desktop and put it in the CDROM drive of the laptop....

Exchange Extension Error
I'm trying update an email address and an error pops up. Microsoft Active Directory - Exchange Extension A Local Error has occured. Facility: Win32 ID no:8007203b Microsoft Active Directory - Exchange Extension Everything else seems to be working ok. Any ideas? Thanks, Q does this apply? http://support.microsoft.com/default.aspx?scid=kb;en-us;329642 "Quan" <anonymous@discussions.microsoft.com> wrote in message news:1a2001c4abc4$e8f2ea30$7d02280a@phx.gbl... > I'm trying update an email address and an error pops up. > > Microsoft Active Directory - Exchange...

550 5.7.1 relay error messae
I have select number of Clients (3) out of 27 who we can not send emails to, they are in a separate domain from ours. Your message did not reach some or all of the intended recipients. Subject: test 4:35pm Sent: 2/27/2007 4:34 PM The following recipient(s) could not be reached: Sean ***** on 2/27/2007 4:34 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. <mail.n*******.org #5.7.1 smtp;550 5.7.1 Unable to relay for tsc16.****.****@***.local> Rhodes.messiah@gmail.com wrote in news:1172615546.953350.313930 @j...

Can CRM 4.0 professional run on Windows SBS 2003?
CRM 3.0 shipped in two flavours: CRM 3.0 for Small Business Server, and CRM 3.0 professional. Apparently, CRM 4.0 doesn't come in a "for Small Business Server". Instead, it ships as "professional" and "enterpriese" editions. Has anyone tried running CRM 4.0 on Windows Small Business Server 2003? Andy Hi, I'm running CRM 4.0 workgroup on SBS 2003 R2, didnt have any problems yet. As long as you have your ReportServices right during installation, you should be fine. Alex "Andy" wrote: > CRM 3.0 shipped in two flavours: CRM 3.0 for Smal...

are scripts allowed in exchange 2003?
I used to run a few scripts in exchange 5.5, and now that I'm upgrading to 2003 I can't find how to implement these scripts. How do I keep using my scripts from exchange 5.5 in exchange 2003? Can you give us a bit more information regarding your scripts? Are they VBS accessing WMI information, batch files utilizing resource kit (reskit) utilities, etc. Scripting works with Exchange 2003 and Active Directory...I tinker with VBScripts. I have also used batch scripts to manage Exchange 2000 with the reskit utils. Bob "gigi" <anonymous@discussions.microsoft.com> wro...

how to open port in windows server 2003
hi , i have an exchange server 2003(sp1) with windows server 2003 (sp1) the scenarion is like that my mails are going out side through SMTP filter which is installed on another machine in this software the only port 25 is open, internaly my mails are working fine and i can also receive mails from another domain like hotmail and yahoo , but problem i am facing is that from out side of my network means if i want to check my mails from my home i am facing the problem is that i can send mail but can not receivce mail this happend because i am using smtp protocol for sending mails and pop3 ...

Customizing Outlook 2003 toolbar
I want to customize my Outlook 2003 toolbar. I know how to add buttons, but how do I customize the button groupings by adding the vertical slash /separator? I can't find the separator in any of the categories/commands in the customize dialog box. Any help would be appreciated. Thanks Jim "Jim" <kraskamess@dakotacomm.net> wrote: >I want to customize my Outlook 2003 toolbar. I know how to add buttons, but >how do I customize the button groupings by adding the vertical slash >/separator? I can't find the separator in any of the categories/commands in >the ...

Any one have crm 3.0 installation and config certification dumps ,
Hi Folks , If Any one have crm 3.0 installation and config certification dumps , Please post it or send to krishna.919ATgmail.com=20 Thanks=20 Kris=20 Reply =BB Are you refering to this? CRM 3.0 90 Days trial http://www.microsoft.com/downloads/details.aspx?FamilyID=7d418781-69ad-422d-92fa-87fdb2538e2c&DisplayLang=en <krishna.919@gmail.com> wrote in message news:1150431561.738912.313120@g10g2000cwb.googlegroups.com... Hi Folks , If Any one have crm 3.0 installation and config certification dumps , Please post it or send to krishna.919ATgmail.com Thanks Kris Reply � ...

Going Back to 2003
How do I go back to office 2003. Too many problems with the beta -- ray What problems do you have with the beta? Going back can be as simple as uninstalling 2007 and reinstalling 2003, but it is also very likely that you'll run into trouble. I'd only go back if your problems cannot be solved. Patrick Schmid -------------- http://pschmid.net "raymi" <raymi@discussions.microsoft.com> wrote in message news:9721EB11-A922-4FD9-999A-F8B7D69D0D65@microsoft.com: > How do I go back to office 2003. Too many problems with the beta > > -- > ray the best way...

Excel 2003 Print Issue
I have created a spreadsheet to help with a university engineering assignment and I have added a worksheet that is basically an automatically generated report of all the calculations. I have set the Print Area up in such a way so that the results are printed out in well defined pages (e.g. page 1: title page, page 2: summary of input variables, page 3: summary of calculation results etc). The report is arranged vertically in the worksheet, so the pages are 'stacked' on top of each other. It prints out fine in Excel 2000 and 2002 but I recently upgraded to Excel 2003 and now find tha...

Using Outlook client for CRM 3.0 in a remote office
I need to set up access to the corporate CRM from several remote offices. All of them have VPN connections (Windows or Checkpoint). What are the steps required to configure remote clients to be able to use CRM features in Outlook. Remote users can connect to CRM through Internet Expolorer. Thanks. Assuming they are connected, the isntallation over a VPN connection should not be any different than a typicaly installation. If the connection is slow though, the first synch & Go Offline process will be noticiably slower though. -- Matt Parks MVP - Microsoft CRM "mkatsev"...

Outlook 2003
We're on Exchange 2003 and have started rolling out Outlook 2003 in place of Outlook 2000. In Outlook 2003 by default all folders come up grouped by day and with solid lines between the messages. Everyone hates these "features" and has made a point of telling me so. Yes, each individual folder can be changed back through the user interface but that's a non-solution for 100 users that have an average of 25 folders each plus the 50 or so public folders as well. Is there any way to change this default behavior in Outlook 2003 so that all folders come up without the solid lines...

Exchange 2003 Enterprise and several mailbox stores
Is there any limitation on how many mailbox stores in a administrative group you can create? For now we have 4 mailbox groups and 1 public folder, when trying to create one more Mailbox-group i get this errormsg: This storage group alreday contains maximum number of stores allowed. ID no: c1034a7a I thought that Enterprise edition had no limit. Kind Regards Peter Kulinski You can create up to 4 storage groups, each containing a maximum of 5 stores. Enterprise Edition has a limit of 20 stores. The 'no limit' you've heard about probably applies to the sizes of each of t...

Word problems 2003 and 2007 version
hey everyone both on my main computer and my brothers laptop word isnt working! its so annoying! on my desktop PC i have windows xp and word 2003. after getting a virus which stopped the internet from working i had to do a system restore - which got rid of the virus. but when i click on word it says that "this shortcut only applies to installed products", and when i go to word through program files it says "this product is not installed on this user" - but there is no setup thing i can press - will i need the disc maybe? on my bro's laptop he got the sa...

Outlook 2003 won't open in ie but outlook express does
I just upgraded my harddrive form 120 gb to 400 gb using segates disk utility and when all was done eveything except system restore and the read email link from ie 7 worked fine. OL express would open and run ok but OL 2003 would not, no error just won't open. Doesnt' work in firefox either. Have uninstalled and reinstalled Office, no luck. Have unistalled ie7, no go either. Got system restore to work again by diabling the service from the managment console then starting it from the system restore tab in my computers/proporties. There seems to be some connection from ie to outlook...

Exchange server recovery
I am running 2 exchange servers in a Windows 2000 AD domain. My 2nd Exchange server has failed and Dell is sending a replacement server. I know that I can run setup and use the /disasterrecovery switch to reinstall Exchange on this new box. My question is: how do I install the replacement server into the domain with the domain already having a server by that name? In other words Poly_ethylene has failed and when I get its replacement I will be loading server onto this box and putting it back into the domain using the same name. How can I do this? I have a full bakup of C: and sys...

Exchange 2003 OWA #5
I accidentally killed my default website that contained the exchange virtual directories. Can someone tell me how to recreate them? Thanks ...

outlook 2003 missing emails offline
I am trying to setup a user with an offline folder in outlook 2003. The problem is it does not download all his emails. ON the server it shows he has 200 emails, but in his offline it is only 30. I checked and there is no filters or anything on it. I tried recreating his offline folders and everything, to no avail. Any suggestions? It looks like the emails he is missing are a month or so old, although he has older ones from a few years ago? Did you check to see which folders are set for offline synch? Is this user using Exchange Cached Mode? --� Milly Staples [MVP - Outlook] Post al...

Outlook 2003 "Full Name..." field in contact screen reversed.
Outlook 2003 "Full Name..." field in contact screen reversed. I am using XP, with Outlook 2003. For some reason, all my 800 contacts are having a problem. When I open the contact screen the "Full Name... " field is displaying names backwards. "Mr. John Smith" displays as "Mr. Smith John" I have checked my "Contacts Options" selection for default Full Name order and it correctly displays "First (Middle) Last"... I have noticed that if I delete the name and re-enter it, it displays correctly, however I cannot spend the time to d...