Problems printing in Publisher 2003 with HP PSC 2410 #2
I am new to publisher 2003 and am having great difficulties printing anything
properly using an HP PSC 2410 all in one. As an example when trying to print
a half page side folded pre-designed greetings card all that prints is page 1
and part of page 4, minus any text. Pages 2 and 3 are missing altogether.
The print preview however displays everything correctly. I have reinstalled
Office 2003 and updated the printer drivers to the latest versions but the
problem remains. Any help is much appreciated.
...Exchange Active Sync #4
I have a user with a Sprint PalmOne Treo 650. Sprint advertises that this
supported by Exchange 2003 Server Active Sync. Microsoft has documented
Active Sync is included with Exchange 2003 at no additional cost.
I have not been able to find documentation on how to install and configure
Exchange 2003 Active Sync to support a Sprint PalmOne Treo 650.
Can anyone point me to Microsoft or Sprint/PalmOne documentation on how to
setup Exchange 2003 Active Sync to support a Treo 650?
I work with the American Red Cross, a non-profit organization. I appreciate
your help and support.
On ...Re: Extracting Exchange User Data From AD 02-24-10
If you do not like scripting, you can try GAL Exporter or Fast User
Manager & Reports from IMIBO - http://www.imibo.com
> "Ringholz, Blake" <email@example.com> wrote in message
>> Hello All -
>> I need to get an Excel Spreadsheet that lists everyone first name, last
>> name, email address, job title, etc pulled from Active Directory. Is
>> there an easy way to do this?
...InPlace ugrade from Exchange 2000 to 2003 recovery question
Will shortly be doing an inplace upgrade from Exchange 2000 enterprise
edition to Exchange 2003 Enterprise edition. After we do all the steps ie.
Forestprep/domainprep etc then do the actual upgrade if the upgrade fails how
do we roll back.
We use Brightstor Arcserve version 11 which is supported by Exchange 2000
and we backup doing the Full method not bricks level. I have documentation
on how to restore Exchange using this but this just restores the database to
my knowledge (never had to do it) with exchange 2000 so how do I roll back a
failed upgrade. We have to do an inplace...exchange 2003
I just set up a mail server at things are working fine in
the network where it resides. The issue is that I have 5
other buildings that are connected via a VPN, and they
can not connect.
Do I need to change settings at their locations? DNS??
It depends on type of client, but generally proper DNS setup is
required. Also make sure that no firewalls interfere.
> I just set up a mail server at things are working fine in
> the network where it resides. The issue is that I have 5
> other buildings that are connected via a VPN, and they
> can not co...Exchange 2003 SP1 Install Error
When I try to install E2003 SP1 I get the error:
EventType exchangesetuperror, P1 6_5_7226_0, P2 update, P3 microsoft
exchange messaging and collaboration services, P4 install, P5 e0070101, P6
_null_, P7 1, P8 NIL, P9 NIL, P10 NI
The log says it cannot find a file but I can't tell which file it's looking
Any ideas how to fix this?
...CRM do not recognize different character set encoding for incoming e-mail???
I have a problem with some of incoming e-mail. If incoming e-mail
character set is not unicode but for example Cyrillic then I dont see
russian letters, but some scrawl!!! My Outlook recognize all what I
need. Whats about CRM???
Sorry about my poor english.
...Issue with Deployment Manager
After install CRM 1.2, when we try to access Users Administrators in the
Deployment Manager, we receive a message, that we can't connect to METABASE
Database, errocode 80004005
Has somebody find the same problem?
Is crm from the web client working?
"Manel Moreno" <firstname.lastname@example.org> wrote in message
> Dear Friends,
> After install CRM 1.2, when we try to access Users Administrators in the
> Deployment Manager, we receive a message, that we can't connect t...outlook 2003 add a dictionary
how can add a dictionary for spell checking ?
in outlook 2003 su tools / options / spelling
actually i have only English e French.
...Outlook 2003 Newsreader
I've Outlook 2003 and I tried to use it to read newsgroups, using the
customize in the menu bar and putting the option news on the go menu. It
worked, but only the first time. The optino news now disapeared from the
menu go, and from the customize. Where it go? I tried to repair and don't
fix. Another thing is the Business Manager that I installed I think version
beta, that crashes often, but I imagine that we can't have a solution on
that without more info.
To get the News command back, go back to the Programs tab in Control Panel |
Internet Options and...Migrating Grant Management from EBS Porect Tracking to AA
We are going to migrate Grant Management from Project Tracking to AA for an
upgrade from GP 7.5 to 9.0. We are planning to follow the Microsoft
conversion roadmap document. Has anyone else done this? Was the MS method
successful or did you take a different approach? Thanks!!!
...Start Outlook 2003 at windows startup??
Hi, I have a simple question:
how do I have Outlook 2003 started automatically and minimized to
system tray at windows startup?
Thanks in advance
email@example.com <firstname.lastname@example.org> wrote:
> how do I have Outlook 2003 started automatically and minimized to
> system tray at windows startup?
Put a shortcut to it in your Startup program group. However, I don't
believe it will start minimized.
It's better to put a shortcut in your Quick Launch bar or you will get errors
if OL loads too soon before your connection and antivirus. You can customiz...Clarification please on exchange 2003 with DPM Server 2010
I would like to protect an exchange 2003 setup remotely. In the event of a problem such as accidently deleted mail etc. the way to restore the database files would is to use a recovery storage group? Now does this need to be restored back over the internet to the Exchange server or can the databases be restored onto a disk taken out to the server and then loaded into the recovery storage group?
I am not sure what you mean "Now does this need to be restored back
over the internet to the Exchange server" but yes to restore the exchange
databases you can restore the files ...SBS 2003 migration to Server 2008 STD
We are at the limit of 75 Users and want to Migrate away from our old SBS
2003 Server to two new 2008 STD Server (one for Exchange 2010)
I have looked for infos how to do that correctly but i could not find any
good basis to start with.
Someone already accomplished that task?
I recommend Server 2008 R2 over 2008. If you use Server 2008 make sure you
have SP2 or better installed before you try to install Exchange 2010.
I have done it. It was fairly straightforward. That said it was not easy.
There is a lot of conflicting information on the web. The basic procedure
I am having a problem with Exchange ActiveSync. It has been working for
about 4 months now, and nothing has really changed. I was able to sync it to
my IPaq via a VPN into the network with no problems. Well, today it started
with an Internet Error_2 when trying to sync. I get a n event log error
saying that there is a problem in the web.config file on line 72, which
happens to be the lines that Microsoft has you add via KB#823265. I have
searched and searched. Anyone have any ideas??
...Exchange server recovery advice needed
We have been hit by a relatively big disk crash and I have to rebuild
our exchange 2003 (SP1) server
Fortunately I have a fully working backup but I still need to "replay"
some LOG files as we only do weekly "full" snapshot.
So to cut a long story short I have recovered and restarted the server
as it was one week ago and everything seems fine EXCEPT for the
messages (and other items) created since last backup.
I DO have the log file for those days... but how do I "replay" them ?
What is my best course of action ?
At the moment I plan to create a separat...Outgoing Mail Issues with Entourage Hotmail Connector
Operating System: Mac OS X 10.6 (Snow Leopard)
Email Client: pop
Anyone have an issue with Hotmail for Entourage? I can revieve messages but cannot send. I am getting the following error when I try to send a message (of any size, even text only): <br><br>"An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic." <br><br>It has been like this for about 3 days. Anyone have an idea? I have checked and tweaked my SMTP security settings, tried multiple internet ...E-mail Tracking 2003
I know in Outlook 2003 that e-mail recipients have the
option to not send "read receipts" - can this be
disabled? A lot of my users in the past have relied on
getting e-mail receipts and tracking their e-mails -
they are very unhappy about the recipient having an
option to decline their request for receipt in Outlook
> I know in Outlook 2003 that e-mail recipients have the
> option to not send "read receipts" - can this be
> disabled? A lot of my users in the past have relied on
> getting e-mail receipts and tracking their e-m...Service Pack Installation Issues with GP 9.00.0247.0 on Windows Vi
Greetings, I have installed Great Plains v9.00.0114.0 on Windows Vista. I
ran the installation package MicrosoftDynamicsGP-KB923671-v9-ENU, but receive
the following messages with result of a failed installation of the Service
Log Name: Application
Date: 10/8/2007 11:50:13 AM
Event ID: 11729
Task Category: None
Product: Microsoft Dynamics GP 9.0 -- Configuration failed.
<Event xmlns="http://schemas...Question Re: Migration of Exchange to New Server.
I'm in the process of replacing an aging Exchange server with a brand new
server. Once complete the old server will be taken off line and recycled.
I figure the easiest way to do this is bring the new server up as a second
Exchange server within the domain and then move the mail boxes from the old
server to the new server but I have a couple of questions.
1) How do I move the public folders? I'm assuming I can setup Replication
between the two servers and that will migrate the public folder data.
2) What happens when the current server goes off line? Other then having to
upd...Remote Exchange server?
I have a client in a real problem area.
The power is so bad that it's guaranteed to be off most weekends in
Battery backup and power backup is NOT where i want to go here, so
please dont suggest I concentrate on this...because it just won't
I would like to setup a remote exchange 03 server for this client in a
data center. So when the power goes down, the clients can all connect
by outlook web access without any interruptions.
Clents from the troubled office would also have to connect to the
remote exchange server during normal office hours.
Is ...EmigrantDirect, wrong web address for online services (Money 2003)
Version: Money 2003 (I know, I know, I'll upgrade if I can ever get it to
I used to be able to receive transactions from EmigrantDirect. However, as
of last year, they changed their web address. The web address stored by
Money is (https://cib-maintpg.ibanking-services.com/special/b321_maint.htm),
which is no longer valid. Is there a way I can manually change the address,
or guide Money to the right address? I have tried to go in through the
browser in Money to download statements directly, but I can't seem to update
the address so that automatic downloads...One Exchange server wont send mail to certain domains
Just wondering if I can pick someones brains.
We have 2 Exchange servers, 1 2000 (Ex2000 Sp3, Win2k SP4, Global Catalogue,
member), and 1 2003 server (Ex2003 Sp2, Win2k3 SP2, master).
Since putting in the 2003 server, users on the 2000 server get some "mail
server rejected connection" failures when sending to 1 or 2 domains, most
other domains accept mail ok. Users on the 2003 box can send fine. We've
checked our MX records which are in place on the firewall, and we can also
telnet to these domains and complete the telnet test.
2003 > outside world (u...Outlook 2003 Usepecified error
I am having real problems trying to resolve an issue with outlook 2003 with
Word as the e-mail editor. I am trying to forward an e-mail with about 5 pdf
attachments that come to about 3mb in size, when I try to send the e-mail I
get an "Unspecified error" If I turn off the word as the e-mail editor it
works ok and sends the e-mail ok. I have also changed the text from html to
plain text but i then get a 2nd error which I have managed to get rid of but
readind the kb base article 870707. I have also tried running the detect and
repair along with installing the latest s...Outlook connection issue
I have Exchange 5.5 installed and a few clients running
outlook on 2000 Professional, NT Workstation and XP, when
trying to send and e-mail, the client get a box with the
Outlook is trying to retrieve information
Does anyone knows how to resolve this.