Exchange 5.5 SMTP Relay problem


I currently had one Exchange 5.5 SP4 server that forward all email to
Mailsweeper.  Mailsweeper was configured to send outgoing mail to the
following:    to    to
all other mail to yyy.yyy.yyyy.yyyy.

Due to company changes I have been asked to remove the mailsweeper
box, now I am having problems doing the above with Exchange.
I have already configured the IMS default "forward all messages to
host" yyy.yyy.yyy.yyy

and E-mail domains as specified    to    to

This was done within the IMS properties page- Connections Tab. 
However it still will not route properly...  When I telnet onto the
exchange server (bridgehead 5.5 from within the LAN) I can blind email
a message from a mailbox held on this server to any domain.  However
when I use Outlook from a workstation, I cannot send an email to any
of the domains within the "email Domains" that have been specified in
the IMS.  I however can send to any other domain (i.e. the default). 
I can recieve emails inbound without any problem.

I have set full monitoring on MTA, IMS etc and everything looks fine
for the telnet session,  however, there is no warnings, errors etc for
when I cannot send the message using outlook.  Also this message does
not apear to be held in any queues.  After about 7 days the
disappearing email has a NDR from our ISP mail relay on the default
although is should never go down this route.  I believe these emails
are going down the default route.

Have you any Ideas on how to cure this problem,

waiting with anticipation,

1/8/2004 5:37:36 PM
exchange.admin 57650 articles. 2 followers. Follow

0 Replies

Similar Articles

[PageSpeed] 19


Similar Artilces:

Customize Outlook today does not work #5
I have read the replies about if MS update 813489 is install customize outlook today does not work. What if you do NOT have MS update 813489 install and it still does not work then what? Here is a good one for you. If you update to Office 2003 then it works. But if you install (not update) Office 2003 you can open customize outlook today, but you can not make or save any changes. Error "an activeX control on this page might be unsafe to.... I am having the same problem. Only update 813489 has not been loaded on my computer, because it is not relevant to my system. However, I did ...

Re: Extracting Exchange User Data From AD 02-24-10
If you do not like scripting, you can try GAL Exporter or Fast User Manager & Reports from IMIBO - > > "Ringholz, Blake" <> wrote in message > >> Hello All - >> >> I need to get an Excel Spreadsheet that lists everyone first name, last >> name, email address, job title, etc pulled from Active Directory. Is >> there an easy way to do this? >> >> Thanks, >> Blake > > > > > ...

Comments problem
I've created a number of comments. When I position the comments where I want them, they only reflect their positions on "Show" or "Edit" comment. All the comments default to the same relationship to the cells when you pass over them. This is a problem because I've also used data vaildation (with lists) on these cells and you can't display the comment with the list pulled down at the same time because the comments are tool close to the validated cell. Thanks in adavance. The comment usually appears to the right of the cell, and should still allow you to see t...

Exchange Active Sync #4
I have a user with a Sprint PalmOne Treo 650. Sprint advertises that this is supported by Exchange 2003 Server Active Sync. Microsoft has documented that Active Sync is included with Exchange 2003 at no additional cost. I have not been able to find documentation on how to install and configure Exchange 2003 Active Sync to support a Sprint PalmOne Treo 650. Can anyone point me to Microsoft or Sprint/PalmOne documentation on how to setup Exchange 2003 Active Sync to support a Treo 650? I work with the American Red Cross, a non-profit organization. I appreciate your help and support. On ...

InPlace ugrade from Exchange 2000 to 2003 recovery question
Hi, Will shortly be doing an inplace upgrade from Exchange 2000 enterprise edition to Exchange 2003 Enterprise edition. After we do all the steps ie. Forestprep/domainprep etc then do the actual upgrade if the upgrade fails how do we roll back. We use Brightstor Arcserve version 11 which is supported by Exchange 2000 and we backup doing the Full method not bricks level. I have documentation on how to restore Exchange using this but this just restores the database to my knowledge (never had to do it) with exchange 2000 so how do I roll back a failed upgrade. We have to do an inplace...

exchange 2003
I just set up a mail server at things are working fine in the network where it resides. The issue is that I have 5 other buildings that are connected via a VPN, and they can not connect. Do I need to change settings at their locations? DNS?? WINNS??? It depends on type of client, but generally proper DNS setup is required. Also make sure that no firewalls interfere. laker18 wrote: > I just set up a mail server at things are working fine in > the network where it resides. The issue is that I have 5 > other buildings that are connected via a VPN, and they > can not co...

Exchange 2003 SP1 Install Error
When I try to install E2003 SP1 I get the error: EventType exchangesetuperror, P1 6_5_7226_0, P2 update, P3 microsoft exchange messaging and collaboration services, P4 install, P5 e0070101, P6 _null_, P7 1, P8 NIL, P9 NIL, P10 NI The log says it cannot find a file but I can't tell which file it's looking for. Any ideas how to fix this? Thanks ...

Document not saved #5
I am trying to save a spreadsheet. Everythgin seems fine excpet for the message "Document not saved" Why is it telling me this and how can I save my work? I have tried saving it to different places and I still get the same message. Hi John, SYMPTOMS When you attempt to save a workbook, you may receive the following error message: Document Not Saved CAUSE This problem may occur when the following conditions are true: The workbook was created from a template that contained an embedded object. -and- You have inserted a worksheet into your workbook from...

VBA Help problem
I'm using Office 2003 SP3 on Win 2000 SP4. When I use VBA help, if thee are hyperlinks on the page I get a popup with the following error: "Runtime error has occurred" Line 16: Error: not implemented If I choose debug from this dialog box I am taken to a script and another error popup: "htmlfile: Not implemented" there is a yellow arrow at the line: "document.onclick = window.parent.closeList" Am I missing a reference somewhere in VBA or is this a more serious problem? The Windows 2000 install has been around a long time... I've ...

code problem
Hi this is a follow on to a previous thread (Copy Macro) We are now successfully creating a new Workbook using the code below. With ActiveWorkbook FName = .Path & "\code.txt" .VBProject.VBComponents("Module2_sort").Export FName End With ThisWorkbook.Worksheets(Array("Supplier Concerns")).Copy ActiveWorkbook.SaveAs Filename:="c:\Week\testing" & strFileName & ".xls" ActiveWorkbook.VBProject.VBComponents.Import FName Problem is when we open the new Workbook and run the macro the code defaults ba...

Printing problem from Excel 2007
Greetings, I am having an issue with printing from Excel 2007. Many users when printing from Excel with get several pages of non-sensical "junk" printed out on the pages. If it actually prints what is on the page, none of the items are in the cells, but look like they are just randomly thrown about the page. I have found that this most often is related to the Calibri font somehow, because I instruct them to change the font to Arial and all prints fine. That being said, if the user converts the Excel sheet into a PDF and print, it prints perfect. This is a great workaround, but kind ...

Excel Mail Merger Problem
When merging excel with word currrency field is dropping off zeros to the right of decimal point..if field has $ 56.03, it imports correctly, but if it is $56.00, it comes in as $56, if it is $56.30, it comes in as $56.3...this process is for invoices..any advice (I've tried everything)? Debra Dalgleish has given the following reply in newsgroups and has also identified the following MS KB articles in such as : 304387 - WD: Date, Phone N...

synchronising problem with Sony NWZ-S545
Up until recently i could sync tracks/albums etc to my sony S545 MP3. now when i try and drag tracks to the sync folder then click start sync the mp3 player just freezes, WMP states "processing" but nothing happens. Have searched the web for a solution but nothing. done sysem restore etc etc. I guess it must be a recent update but what one? Its a pain in the backside and hope someone can help "Wookywoo" wrote: > Up until recently i could sync tracks/albums etc to my sony S545 MP3. now > when i try and drag tracks to the sync folder then click s...

conversion lotus 123 files to excel -- problem
I am converting lotus123 files to excel2002. One problem is that in lotus, literals are ignored when found in a cell within a formula. Excel on the other hand is not doing this and therefore causing #value errors on all the formulas where this occurs. Is there a way to handle this in excel other than manually having to change all the formulas? ...

Problem hot synching Outlook 2002 with Palm Pilot
I recently had to reformat my c: drive and reinstall Windows XP and Office XP, including Outlook 2002. Since then, whenever I hot synch my Palm Pilot with Outlook, the hot synch is interrupted with a dialog saying "This action cannot be completed because the 'Inbox Microsoft Outlook' program is not responding. Choose 'Switch to" and connect the problem." When I press the 'Switch to" button, I get a second dialog, which says, "Microsoft Outlook - A program is trying to access e-mail addresses you have stored in Outlook. Do you want to allow this? ...

Problems printing in Publisher 2003 with HP PSC 2410 #2
I am new to publisher 2003 and am having great difficulties printing anything properly using an HP PSC 2410 all in one. As an example when trying to print a half page side folded pre-designed greetings card all that prints is page 1 and part of page 4, minus any text. Pages 2 and 3 are missing altogether. The print preview however displays everything correctly. I have reinstalled Office 2003 and updated the printer drivers to the latest versions but the problem remains. Any help is much appreciated. ...

SMTP address list
Does anyone know of a way to obtain a list of all SMTP email addresses accepted by a server and the corresponding user account in Exchange 2003? Thanks Brad Palmer You can use LDIFDE to dump Active Directory attributes to a text file. The email addresses are held in the 'proxyAddresses' attribute, so: ldifde -f dump.ldf -l proxyaddresses This will give you a file called dump.ldf containing your addresses. You can add other Active Directory attributes to the export file as you see fit. -- Neil Hobson Exchange MVP For Exchange news, links, and tips, check: http://www.msexc...

problem in changing the text of sentences before tables
I am developing a word automation application. In a method of mine, I change the text of some sentences of an opened word file, but the problem is when I change the text of a sentence which located before a table, it will be moved to the first cell of the table. My code is as follow: void myMethod( long startingSentenceNumber, const char *toBeSearched, const char *replacement, bool replace ) { Range currentSentenceRange; Selection sentenceSelection; Sentences sentencesList = m_document.GetSentences(); long sentencesCount = sentencesList.GetCount(); CString replacementCStr(...

Clarification please on exchange 2003 with DPM Server 2010
I would like to protect an exchange 2003 setup remotely. In the event of a problem such as accidently deleted mail etc. the way to restore the database files would is to use a recovery storage group? Now does this need to be restored back over the internet to the Exchange server or can the databases be restored onto a disk taken out to the server and then loaded into the recovery storage group? I am not sure what you mean "Now does this need to be restored back over the internet to the Exchange server" but yes to restore the exchange databases you can restore the files ...

Exchange server recovery advice needed
Folks We have been hit by a relatively big disk crash and I have to rebuild our exchange 2003 (SP1) server Fortunately I have a fully working backup but I still need to "replay" some LOG files as we only do weekly "full" snapshot. So to cut a long story short I have recovered and restarted the server as it was one week ago and everything seems fine EXCEPT for the messages (and other items) created since last backup. I DO have the log file for those days... but how do I "replay" them ? What is my best course of action ? At the moment I plan to create a separat...

save as problem
I cant save my excel file The "save as" option is not eviable. Whats happening? "From a prior post by Ron DeBruin, You can reset your menubar to default. Right click menubar. Customize > Toolbars Tab. Select worksheet menubar. Click Reset button. Using VBA Application : CommandBars(""Worksheet menu bar"").Controls(""File"").Reset Or the whole menubar Application.CommandBars(1).Reset You lost the things you add to the menubar!!" ========================================================== And one link that offers some sugges...

Exchange ActiveSync
Hello All, I am having a problem with Exchange ActiveSync. It has been working for about 4 months now, and nothing has really changed. I was able to sync it to my IPaq via a VPN into the network with no problems. Well, today it started with an Internet Error_2 when trying to sync. I get a n event log error saying that there is a problem in the web.config file on line 72, which happens to be the lines that Microsoft has you add via KB#823265. I have searched and searched. Anyone have any ideas?? ...

Problem OL 2002 Email
I am having a problem with OL 2002 email settings. I have two computers which I am setting up. One computer works perfectly. The second computer I have configured exactly the same...incoming/outgoing servers and ports, etc... are all setup the same. On the second computer when I press test email settings, everything tests fine. But when I try to do a Send/Receive, I run into problems. First, the POP3 tries to connect to the POP3 server twice at the same time. (I am able to see this on my POP3 server console.) Second, the SMTP sending mail never connects to my SMTP server. (Ag...

2007 B2 MSOO has encountered a problem
More often then not when I click to open an email in my inbox I get this MSOO pop-up with a checkbox, checked telling me MSOO has encountered a problem and needs to close. Has this been an issue for others and is there a fix. If you have Adobe Acrobat Pro 6/7 (not the reader), go into Control Panel, Add/Remove Programs, click change for Adobe Acrobat Pro and remove the Office & Outlook plugins. Patrick Schmid -------------- "Jax" <> wrote in message > More of...

Odd problem with worksheets when opening file
Okay, here's the odd problem that's come up. When you double click on a excel file, excel opens up, but you can onl see the toolbars. The grid area looks like a snapshot of whatever you current background is before the file opened up. If you were showin your desktop, after the excel file opened, you'd still see your deskto in the datagrid area. If you start up a new excel file, then do the File>Open>file name, th file will open correctly. This problem happens across users here. Everyone is currently runnin office 2K. Any ideas on what causes the problem and any...