Inconsistent DBASE after doing a restore of Exchange 5.5 Dbase
Tried moving my dying ex 5.5 server to new hardware this weekend and it
failed because the restore did not bring over a log file and left the
dbase in an inconsistant state.
Has any one had this happen to them or heard of this happening. Using
Vertias backup Exec 10.d, The error I recieved when I tried to start
the dbase after the restore was:
EVENT ID 5000, could not start the information store, 0x8004010f
in the app log, and in the system log was the info store service
terminated wth service specfic error, 2147746063.
Another question, since my dbase is 26gb and I can't copy it acros...Where do the messages go?
I am going to do a offline defrag of our Exchange 5.5
(SP4 on W2k server)database and I had the question of
where do the messages go when the services have stopped?
I have done a couple of offline defrags and I have never
had the question and I don't think we have lost any
Where are the messages held? Does the email bounce back
to the sender?
Any help would be greatly appreciated.
"JohnH" <firstname.lastname@example.org> wrote...
> I am going to do a offline defrag of our Exchange 5.5
> (SP4 on W2k server)database and I had the question of
&...Crystal Reports not showing in 3.0
We've installed CRM 3.0 and finally got the SQL Reporting Service working. We
can now click on reports without getting an error message. However, there are
no reports displaying. Is there some additional setup that we need to do? I
understand there is supposed to be like 150 canned reports. Where are they?
Can anyone tell me how the canned reports get installed and where they are
located? What database?
"Barbi Dorin" wrote:
> We've installed CRM 3.0 and finally got the SQL Reporting Service working. We
> can now click on reports without getting an ..."The connection to the Exchange server is unavailable. Outlook must be online or connected to complete this action"
I have setup a number of user accounts and the relative mailboxes without
However, since this afternoon, if I try and connect to a newly mailbox
through the email accounts wizard I get the following error message: "The
connection to the Exchange server is unavailable. Outlook must be online or
connected to complete this action".
This also occurs when I go to File>Open>Other User's Folder... and I try and
lookup an existing account/mailbox that I know I have permission to.
I know Outlook is connected to the Exchange server (I can ping, send and
receive emails) ...Outlook 2003 keeps crashing #2
I get this message when I look in System information. Outlook keeps
crashing quite often. I cannot for example delete two messages without
outlook crashing. My colleagues do not have this problem. We are using
the Microsoft mail exhange server.
Faulting application outlook.exe, version 11.0.5510.0, stamp 3f1380f0,
faulting module mso.dll, version 11.0.5606.0, stamp 3f334cce, debug? 0,
fault address 0x003b6e16.
Does anyone has a solution?=20
1) I would definitely apply Service Pack 2for Office 2003 + applicable
critical security updates.
2) Have you tried starting O...Password Issue with MS Money 2003
I am not familiar with newsgroups but I hope it is a forum
to seek assistance. I am unable to reach MS support via
email from my home computer on this issue. My Money 2003
requires a net passport password to open my account in
Money that I have successfully accessed for approximately
12 months. It does not recognize my password now. I
have attempted several times with my existing password,
changed my net passport password, even uninstalled and re-
installed MS Money 2003 to gain access to my account.
Nothing has worked. Each time it states I have failed to
enter the corr...Exchange 2003 new install can not receive external email.
I have just setup a new Windows Server 2003 standard edition with
Exchange 2003 standard edition on it. I have been working for a while
trying to get it to receive external email. I can send out and send/
receive internal messages, but when someone trys to send me a message
from outside our network they get the following returned mail message
This Message was undeliverable due to the following reason:
Each of the following recipients was rejected by a remote mail
The reasons given by the server are included to help you determine
each recipient was rejected.
Recipient: <**...Standard MFC controls behave different when showing polish characters
I have a rather simple to describe but difficult to solve problem.
Our customers want to use our ANSI MFC program to show different
For example Polish.
When I set the font for the different controls they behave different.
For example the CEdit shows the polish characters just right but the
CButton with checkbox style shows glyphs instead of the special
Every control that is owner draw and uses for example the DrawText()
function of the device context shows the characters right.
I've experimented with _UNICODE for the display part and everything I
could ...Outlook 2003 and "Check Names"
We are testing Outlook 2003 at our office now and there is
one very frustrating "feature" that is bugging all of us.
When we create a new e-mail message and type in the first
name of a person from the global address book and hit ctrl-
k to check the name...we get a response that Outlook
doesn't recognize the name and there are "no suggestions".
The only way Check Name will successfully resolve the name
is if we type it last name first (ie, Gates, Bill). This
was not the case in Office XP or Outlook 2000. You could
search by first name (or partial first name)...Exchange update problem
I have tried to upgrade exch2k3 sp1 to sp2, but the update fails with "the
file pcproxy.dll is in use, and setup cannot identify the app or srvc. setup
Any clues/ideas/suggestions? Please.
This message has been checked for all known viruses.
The information contained in this e-mail and any attachments is confidential
and may be the subject of legal, professional or other privilege. It is
intended for the named addressee only and may not ...Addressing within Exchange 2003
We are running Exchange 2003 SP2. We setup an MX record for a external
email(alumni.cup.edu) these mailboxes do not exist within our exchange org.
But when we send email to these externals email mailboxes we are getting the
#5.5.0 smtp;550 Mailbox unavailable.
Is there a way in exchange to ignore these email address so that we don't
get the NDR from within our Exchange Org?
On Fri, 4 Aug 2006 08:08:02 -0700, Sabo, Eric <email@example.com> wrote:
>We are running Exchange 2003 SP2. We setup an MX record for a external
>email(alumni.cup.edu...how do i add "Software Digrams" Folder in my Visio 2003
how do i add software diags folder in visio 2003 version. Like if i go to
File->New it shows folders like brainstorming, project schedule, block
diagrams but in my case its missing the Software Diags folder which contains
activity diags, web mock ups, use case diags etc. please let me know how to
get that template. thanks.
What edition of Visio are you using? Check by going to the About Microsoft
Office Visio dialog from the Help menu.
"Ankur" <Ankur@discussions.microsoft.com> wrote in message
> how...Exchange 2k3 imap VS startup
I have an E2k3 SP1 enterprise edition server. Whenever I reboot, the IMAP4
Virtual server does not start back up. I have to go into Exchange System
Manager and manually start it.
How do I make it start automatically?
How is the service set up - to start manually or automatically? Also, I'd
check the dependencies the service has. It may be that it's trying to start
before the other services have completed starting.
"Tim" <firstname.lastname@example.org> wrote in message
I have an E2k3 SP1 enterprise edition serve...Install Exchange 2003 Server on new Hardware with same name
I got a new server to move my Exchange Server Installation. I want to
keep the name I'm using now for my Server. Already read TechNet Article
"How to Move Exchange Server 2003 to New Hardware and Keep the Same
Server Name". Is there anything else that I should be aware of that is
not on this TechNet article? I'm using a different Disk Configuration,
does this matters? Should this be a smooth process?
Thanks for any help you can give.
The drive letters MUST match, because the paths of the databases are at the
Active Directory. The disks can have different sizes than the or...hyperlinking email addresses
I have a list of email addresses that have hidden text before the first
letter of the email address. I tried all the functionalities to get rid of
this spacing/hidden text, but, it does not work. Now I am trying to
hyperlink the email addresses, how do I do that?
Most likely a non-breaking space...........char 160
CLEAN and TRIM will not pick it up.
What: Alt + 0160(on numpad)
Gord Dibben MS Excel MVP
On Sat, 9 Jan 2010 13:44:01 -0800, CharlesZ
>I have a ...Outlook 2003
we have one client pc with Outlook 2003 where the following problem
if a mail is replied from a user created sub folder of the inbox, the
reply will not appear in sent mails, but will end up in the same sub
folder, sender and recipient appear as identical. The mail goes out
properly though, it's just that Outlook sets internally sender =
recipient and bounces the reply back to the subfolder in which the
original mail is stored.
This happens on a Win 2000 machine with SP4 and all updates, the other
clients use Outlook 2000 or XP and there is no such problem.
There are no ru...[Exchange 2003] Mail enabled public folder and sender address
I have a Windows 2003 domain with a native mode Exchange 2003 organization;
there are some mail enabled public folders.
When a user replies to a message in a public folder, the outgoing mail's
sender address is the user's one; I want it to be the public folder's one,
or at least I'd like the "reply-to" address to be set to the public
How can I accomplish this?
You would need to grant the user permissions to be able to Send As the
public folder. By default, when you reply to a message that is in a PF, the
PF is not composing the ...Event id 9693 MsExchangeIS
Has anyone else in the world seen this? I used to get 9667 before upgrading
I need more information to be able to assist you with this. Can you please
post the entire event here to the newsgroups ... please change and internal
information to generic names like "Computer".
Hope this Helps,
Run Microsoft Exchange Server Best Practices Analyzer Today
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
...Message comes as an attachment
I'm using Exchange 2003 and Outlook. Some clients receive my messages as a
blank email with an attachment that contains the message. For most clients
the messages look fine but there are a few that always do this. I'm
guessing that it is an incompatible setting between our mail servers. Any
idea what I should look for?
A couple things I forgot to mention - the clients are using Exchange 5.5 and
2000, and this apparently only happens when there is an attachment in the
original email. If we send them a message with just text and no attachment
it shows up fine, but if we s...Unexpected error message on closing an Excel file
Suddenly I am getting the following message when I try to close a workbook:
"Your formula contains an invalid external reference to a worksheet.
Verify that the path, workbook, and range name or cell reference are
correct, and try again"
The mysterious thing is that it does not happen consistently and that, after
I click OK after the above message, I can still save the file.
What might be the cause of this error message and can the "invalid
reference" be tracked down using one of the utility add-ins such as J.
If it only happens when you close ...Event Planning/Event Management Add-On
Does anyone know of a good add-on to handle event planning? It appears that
Axonom sells a product. I'm not sure it's compatible with CRM 3.0, though.
The screen shots are from 1.x.
We're looking for an add-on that will help us plan our annual user
conference with about 300 attendees. Before I go off and build our own custom
entities to handle this stuff, I thought I'd see what's out there.
Our requirements are pretty basic:
- Track attendees to the event, and which training sessions and activities
they'd like to attend.
- Payment information including total fee...DNS Error on Exchange
I am getting the following error on my Exchange server. What is my problem?
Event Type: Warning
Event Source: smtpsvc
Event Category: None
Event ID: 2012
Time: 12:01:53 PM
SMTP could not connect to the DNS server '18.104.22.168'. The protocol used
was 'UDP'. It may be down or inaccessible.
For more information, see Help and Support Center at
0000: d5 04 00 00 Õ...
Is that a DNS server that's configured on your Exchange box? It shoul...Import from Eudora 6 to Outlook 2003
I am trying to import messages from Eudora 6 to Outlook 2003. I am receiving the error message "The mail folder could not be opened. If another application is using this file, please close and try again.
No other applications are running
Thanks for any help
see article 257354 of the microsoft knowledge base on
"Outlook Cannot Import Eudora Messages When Eudora Mail Is
Stored in a Non-Default Location"
>I am trying to import messages from Eudora 6 to Outlook
2003. I am receiving the error message ...Outlook freezes after sending one email after upgrading 4.0
We just upgraded from 3.0 to 4.0 this weekend. All client machines have had
the desktop client upgraded and 2 have the same issue. One is XP with Outlook
2003 and the other is Vista with Outlook 2007. Open opens and the CRM addin
initializes correctly. As soon as you compose and send an email, Outlook
locks up and you have to kill the process in task manager to close Outlook.
I've had the same problem and have tried all I can think of...how did you fix
> We just upgraded from 3.0 to 4.0 this weekend. All client machines have...Email Router Failing with System.UriFormatException: Invalid URI:
I cannot seem to get a handle on this, even with a very basic email workflow
The rule is simply to watch email@example.com. If any email goes in, send a
notification email to firstname.lastname@example.org
The Server has the following error. Anyone have any ideas?
Event Type: Error
Event Source: MSCRMExRouterService
Event Category: None
Event ID: 0
Time: 4:01:50 PM
System.UriFormatException: Invalid URI: The hostname could not be parsed.
at System.Uri..ctor(String uriString, Boolean dontEscape)