Why can't I use an event sink to add a header entry
The msdn site says the property is read only. Anyone know of a way to do
...Student Log in network, Preview Report, then exit and log out
I set up single report 'rptStudent', a custom toolbar with print button.
When student logs in network computer with student ID (like 881234567), I
1. my access start (I can put shortcut in startup)
2. automatically print preview rptStudent with student ID as criteria
3. when student close the print preview, it exits Access and logs off
Can I use Dev Ashish's get user name:
How to put verything together?
found solution in http://www.mvps.org/access/api/api0016.htm
"Song Su" <csi...event ID 9646
exchange 2003 sp2. got the event with " ... exceeded the maximum of 500
objects of type "objFolder". I found the article which expalined the symptom
well. http://support.microsoft.com/kb/830829. But can someone explain how a
mapi client uses the objects? What the function is for the objects, for
In our case it's caused by the backup software sending out emails. How to
control a mapi client not to open too many objects?
On Wed, 6 Jan 2010 15:14:01 -0800, Chris
>exchange 200...user id or team id is missing
Thanks to everyone's help I've been able to import into the CDF/DMF
successfully (or so I believe). However when weh I run the Migration
tool, I receive for what appears to be every record:
The user id or team id is missing.
My users have licenses. I've run ListUmappedUsers and there are no
unmapped users. I've run MapUser for all bad users previously. I'm not
sure what this means and how to import my data. Please help.
I've seen other similar posts, but no clear resolution.
When you imported the records into the CDF did each record have an "owner"
c...How to ignore records with a duplicate ID based on a value
I hae searched the forum tono avail, so I'll ask for help.
I have a table [Scope Event Table] which records events with status changes.
The table uses an auto numbered primary key (not shown in the example
below). It has data like this:
DR_ID Event_Date Reason
12556 01/03/2008 Added
12556 01/24/2008 Closed
12874 01/05/2008 Added
14128 02/09/2008 Added
I am a novice at SQL. I am trying to build a query that would pull only the
DR_ID’s where the most recent Reason = “Added”. So I would want results to
look like this:
DR_ID Event_Date Reason
12874 01/05/2008 Added
14128 02/09/2008...Event ID 8197 Source: MSExchangeFBPublish
I am getting this Event every time I reboot my exchange server. Everything
seems to come up ok but the server stalls on loading every time it is
The error description is:
Error initializing session for virtual machine XXXXX. The error number is
0x8004011d. Make sure Microsoft Exchange Store is running.
I don't know how to fix this. I did some searching on that error number and
it pertained to Outlook but not the actual Exchange server. Is there a hotfix
for this problem?
...external emails not delivered to mailboxes in DL when MESSAGE ID l
May be we don't receive a reply in different mailboxes which belong to a
Distribution List. This happens when the original mail was sent using a
Distribution List with the "from:" option. Then someone reply this mail and
the Exchange log says the mail was delivered to mailbox-1, mailbox-2,
mailbox-3, ... and this is not true, only was delivered to one of the
This problem doesn't happend always but when happen the message ID is very
For example this could be a message ID of an incoming message repling the
original message sent with the DIstribution...Windows 2008 Server Kerberos Certificate error ID 29
Hello, I had a Windows 2000 Domain Controller, and translate all AD funtions
to a new Windows 2008 server, PDC, GC.
All worked fine, but a few days ago I got this error, ID 29,
Kerberos-Key-Distribution-Center, not certificate found....
All users can´t access the network shares by the server name, but through
the IP we managed to restore the network units.
Is there a way to restore the certificate , without regenerate the domain?
I ´thank you all in advance for reading, any help will be like a christmas´s
More or less...
Can you give more detail...Exchange IMF event ID 7514
Every hour we have an Event ID 7514 being generated after having installed
IMF on our E2K3 server. IMF is not working and the error code in the event is
What is the cause of this error message?
Do you have Exchange 2003 SP2 applied?
Did you install IMF v1 after SP2?
"Ian" <Ian@discussions.microsoft.com> wrote in message
> Every hour we have an Event ID 7514 being generated after having ...How to use string ID in MessageBoxW () ?
I have a string resource (can be in any lauguage) defined in the string
table. Say the string ID is IDS_USER_GUIDE. Is there a way to display this
string using MessageBoxW(...) sassily?
I have tried this:
CString csMsg (IDS_USER_GUIDE);
and then pass it to the MessageBoxW like this:
MessageBoxW (0, (LPCWSTR)(LPCTSTR)csMsg, "Test", 0);
but it did not work.
Thanks for you help.
PS: I have to use MessageBoxW. I cannot define UNICODE because it introduces
too many changes.
"Polaris" <email@example.com> wrote in message news:<OkGhQIwt...registering my product wont work
OK - so Im trying not to freak out but it took me forever to save up for 2008 Home & Student Edition. I ewnt to best buy, plunked down $165 after taxes, went home, opened it up, and found that there were three different product ID's pasted as labels on the back of the sleeve containing the install CD... Not knowing what to do i simply picked the one at the top and proceeded with installation, everything went along swimmingly - all my old crap was deleted and all my important settings migrated without a hitch however - when i went to register my software it keeps telling me that my ...Application.wait
Can anyone tell me what library reference I have to install to use
application.wait in my VBA in access 97 ?
There is no Wait method for the Application object in Access.
What are you trying to do? You might be able to use the Sleep API (see
http://www.mvps.org/access/api/api0021.htm at "The Access Web" for an
example), or, if you're trying to wait until a shelled process is finished,
Doug Steele, Microsoft Access MVP
(no private e-mails, please)
"jon" <firstname.lastname@example.org...Security, automation events and add-ons
Visio 2003/XP Pro SP2
I'm using the automation in the timeline so I can slide the milestones
back and forth and the dates change automatically.
But, I have this problem on two computers where if I lower my security
to high and disable 'enable automation events' in options > security,
when I start Visio, it tries to run/install all the add-ins I have,
which is about 30 (and I don't know where they all came from; only a
few) - everytime I start Visio. This is no good.
If I increase the security to high, then the automation doesn't work.
Does anyone know how I can...how to clear enties in logons logs ?
some users add many many enties in ESM->..->Mailbox Store->Logons dues
to network problems. now the network is fixed I would like to verify
that the problem was this one. but the entries remain in logons.
is it possible to clears enties in ESM->..->Mailbox Store->Logons ?
On Mon, 14 Aug 2006 17:31:52 +0200, Pierre Bru
>some users add many many enties in ESM->..->Mailbox Store->Logons dues
>to network problems. now the network is fixed I would like to verify
>that the problem was this one. but the entrie...My application does not register itself to windows file manager
I have an application , it does not register itself to windows file manager
( I mean , if I double click on a document of my application type, it does
How can I make it register itself,
CWinApp::RegisterShellFileTypes() is the answer. You would also need to call
EnableShellOpen before calling RegisterShellFileTypes().
Check MSDN for more details:
"behzad" <bn at yahoo.com> wrote in message
> I have an applic...isinteg log file
I am running into a problem
whle running the isinteg utility, I get the message
Isinteg cannot initiate verification process.
please review the log file for more information
I can not locatte the log file, I have tried to force it
to the root of the drive, tried to give it a name on the
root.. but no success
the following is the command line I am using, and the
databases are offline and can be selected...
isinteg -s lvd3 -fix -verbose -test alltests -t
It would appear that you are running multiple instances of ISINTE...Modify Store ID
I want to change the Store Id.
I have changed it throurg database (Store Table) in HQ and Store both side
but after changing it stops communicating with HQ.
Some having any idea?
Check Configuration Table at Store.
"NAVEED" <NAVEED@discussions.microsoft.com> wrote in message
>I want to change the Store Id.
> I have changed it throurg database (Store Table) in HQ and Store both side
> but after changing it stops communicating with HQ.
> Some having any idea?
If yo...Password Logging In Windows
A few years back, I and a friend (while working at MS) exposed and
demonstrated the Windows Logging security hole in NT 4.0, and Win 9x OS's.
This was supposed to have been fixed, but being as busy as I was with other
things I simply didn't track the bug (RAID'ed back in <spit> '97 I think, by
crackie) through to its demise.
Is anyone here familiar with this issue and the resolution? To this day
there are people out there saying that Windows still has this problem. I
don't want to go through the effort of writing another key logger, so don't
ask... >|...Events 9153 and 9188, need some help
Greetings, having an issue here would like some advice on. Running Exchange
SP1 2003 server. Every 13 mins and 15 mins I get event ID's 9153 and 9188,
respectively. The Exchange Domain Servers and Exchange Enterprise Server
groups are in the Users container and have always been in that container,
never moved. The errors apparently appear because it cannot read the group
memberships. The local computer object of the server is a member of the
Exchange Domain servers group as well. Everything is as it should be
according to the KB on MS support. After much digging I found an interestin...External Application
Can anyone tell me how to write into an applicationt that will only work on
a flash drive (removable) or a mapped drive rather than a physical drive?
Many thanks in advanced
Not to worry - resolved now
> Hi All,
> Can anyone tell me how to write into an applicationt that will only work on
> a flash drive (removable) or a mapped drive rather than a physical drive?
> Many thanks in advanced
...'ID no: 80090324 Microsoft Exchange System Attendant occurred'
Has anyone out there come across the error above. I cannot start the System
Attendant on a Front End server, which is configured the same as the back end
server for all TCP/IP related information. When I searched Google I came
http://www.exchangeserverhelp.com/ftopic3791.html. I have verified the
information suggested in this link, and yet I cannot start the SA. Any
"TD" <TD@discussions.microsoft.com> wrote:
>Has anyone out there come across the error above. I cannot start the System
>Attendant on a Front End server, which is configure...Beta testers needed for video conferencing application
Our company, AVE Intervision, is looking for people across the world willing
to participate in the beta testing of our application VCR (Virtual Class
VCR is a new concept of videoconferencing where people can communicate with
bidirectional audio and video, but also accessing a chat (private or public
to the session), share a whiteboard, a presentation or even their desktop.
VCR is cross-platform and works on Windows and Mac OS. The application is
fully web-based and only requires the Adobe Flash Player 9 installed.
If you are willing to help us in the beta testin...Event ID 348
I have a Exchange 2003 server running with Trend Anti
Virus. I have in my application event the following eror:
A message could not be virus scanned - this operation will
be retried later. This error will apair several times,
like he cannot scan this mail. The message comes from one
specific mail adres with extension @newvoice.net. This is
the only mail what generate this event.
Can anyone say what this is and what can I do about it?
Thanks for answering
...ID field not showing
I am using Project 2007 and my ID field is not showing in the Gantt Chart.
I am trying to see the recurring task symbol next to the task but can't seem
to get the ID column to come into view.
Sorry I meant Indicator column, not ID column.
> I am using Project 2007 and my ID field is not showing in the Gantt Chart.
> I am trying to see the recurring task symbol next to the task but can't seem
> to get the ID column to come into view.
> Any ideas?
This is a m...Run Application as a Service under SBS 2008
We run SBS 2008 virtualised under VMware ESXi which like most hypervisors
does not support USB passthrough to the guest OS.
This limitation creates a complication with SBS backup which we have
resolved by implementing a USB over IP device to present a USB HDD to SBS as
a backup target. Unfortunatley the software that runs the device does not
install as a service so if the Admin account is logged off the backup HDD is
disconnected, not an ideal situation.
The old "path\INSTSRV.EXE My Service path\SRVANY.EXE" does not seem to be
supported under Server 2008, does anyone ...