Auto Filter #3
Having trouble with disappearing and disabled Data, Filter
The plain Auto Filter command has disappeared from my
Data, Filter drop down menu and was replaced by the Auto
Filter with the funnel symbol in front of the command
name. The plain Auto Filter command is not to be found in
the customize tool bar commands.
The Auto Filter with the funnel symbol will only turn on
the filter and will not turn it off again. The Show All
command is disabled.
Excel (Office 97) has been uninstalled and reinstalled in
an attempt to bring the Auto Filter command back but to
our surpris...Xpath Query #3
Couldn't find an xpath specifig UG, so I'm posting this here.
I have XML in the following structure:
<Description>Test Assignment 1</Description>
<Description>Task 2</Descri...Active Directory Connector #3
If I go to Active Directroy Sites and Services
--Mail exchagne server
I have a item there called Exchange Settings
in it I have Active Directory Connector Is this suposded to me there?
I did have Exchange 5.5 that since has been removed.
It's from the Active Directory connector. I haven't seen anything that says
it would cause problems to delete it, but likewise it shouldn't cause any
problems if you leave it there. If you do decide to delete it, then make
sure that you have a backup of Active Directory (System State on your DC's)
so ...Public Folder Contact Problem #3
I am running exchange 5.5 sp4.
I have a couple of public folders used for maintaining contacts. We use
one folder called "recruiting" for maintaining job applicants and their
information. We have another folder called "employees" which have our
employees in them. The idea here is that we add the job applicant, and then
at the bottom of the contact, in the contacts section, we add the person who
is going to interview them.
If I open a recruiting contact, and at the bottom of the contact, where
it says "Contacts", add an employee from the "employee&qu...Change admin account for Delivery Status Notificaiton?
Some how a test account our consultant setup is now the sender of our
Delivery Status Notificaiton reports.
How/where can I change this?
This account is also a Exchange Full Administrator (inherited) whatever that
means so I'm afriad to delete the account.
...Stucked mail in Local Delivery Queue
i have server2003sp1 with exchange2003sp1
i have a mail enabled distribution group in ad with few ad members and
few emails assigned: email@example.com, firstname.lastname@example.org
Opened server queue and found few queued mails in Local Delivery, one of
them been in queue from 14.05 til now. Tried to unfreeze it - no luck,
was still in queue.
Check massage tracking for this mail:
SMTP: Message Delivered Locally to multiple recipients
SMTP: Message Scheduled to Retry Local Delivery
Tried to remove that group, afterthat made a new equal group. Still nothig
Now... time is up. Got the event in eve...Local Delivery Scheduling
Anyone know of a product that will allow local delivery scheduling to be
integrated with RMS, i.e. as customer places purchase the system links that
purchase to an in house delivery schedule or something similar?
Thanks in advance,
...Envelope Notification Direction
I like to have the shortcuts pane as my default and populate that with my
fave things. When I get an email I double click the envelope and it opens in
that pane fine. However, when I click it at home it jumps to the folder list
which is really annoying. Does anyone know how to set it straight?
I am using Outlook 2007 on Win7 at home (2007 & XP at work)
...#5.2.3 smtp;450 5.2.3 Msg Size greater than allowed by Remote Host
I keep getting this error when I try to send messages greater than 10Mb to my clients on Exchange Server
From start I had
Global settings - Message Delivery - Defaul
Sending messages size check in Maximum (KB) to 1000
Receiving messages size check in Maximum (KB) to 1000
and al my user under Exchange General - Delivery Restriction
Sending messages size check in Use default limi
Receiving messages size check in Use default limi
then I tried to change the user (on a couple of users) settings t
Sending messages size check in Maximum (KB) to 50000
Receiving messages size check in Ma...Unable To Send Mail #3
Everytime I wish to send my mail, this error will prompt: The operation
failed. An Object could not be found. Please assist. Thank you.
...Delivery Restriction for DL
Using Ex55, I have not been able to restrict users from
sending to our all employee DL. It works for our 'site',
restricting users on the "Delivery Restrictions" tab, but
we replicate our entire address book to other sites. The
other sites can send to our all employee DL, which is not
a desirable feature.
"Dan" <email@example.com> wrote:
>Using Ex55, I have not been able to restrict users from
>sending to our all employee DL. It works for our 'site',
>restricting users on the "Delivery Restrictions" tab, bu...Exchange 5.5 IMS Services Awaiting delivery
Sorry I clicked YES and i think I may have ended the posting by doing so
Thank you for you time in this
Yes i can see all the messages and who they are from most of them are just
spammed emails with an unknown sender. ( ifo you mean looking via the IMS
services awaiting delivery queue unedr the properties page)
"Mark Arnold [MVP]" wrote:
> On Wed, 15 Dec 2004 06:49:03 -0800, pockettes
> <firstname.lastname@example.org> wrote:
> >I have several emails queued for delivery. I am unable to delete them. Many
> >are from ...Office Notification list is gone....
I used to have a Office Notification window, listing all my outstanding
alarms. Since a while (the last upgrade to 11.2.5 maybe???) I just
receive that little alarm window. However i never see the window
showing all outstanding alarms any more.
I can't find a pref window or what so ever to re-adjust my preferences.
Does anyone have a solution??
...email notification envelope in system tray
The email notification envelope in the system tray is not
showing when a new email arrives even though the "Show an
envelope icon in the system tray" checkbox is checked in
Tools>Options>Email Options>Advanced Email Options.
"C Pastor" <email@example.com> wrote in message news:<firstname.lastname@example.org>...
> The email notification envelope in the system tray is not
> showing when a new email arrives even though the "Show an
> envelope icon in the system tray" checkbox is checked in
> Tools>...The message reached the recipient's e-mail system, but delivery was refused. At
I sent two emails locally throught my exchange box to
local exchange users that are not disabled.
My inbox is filling up with these messages:
From: System Administrator
Sent: Monday, December 29, 2003 5:30 PM
Subject: Undeliverable: EventID : ST0030803 :
Your message did not reach some or all of the intended
Subject: EventID : ST0030803 : Override Detected
Sent: 12/29/2003 5:30 PM
The following recipient(s) could not be reached:
WMS on 12/29/2003 5:30 PM
The message reached the recipient...inbox repair #3
I need help with using the inbox repair.
What is there to help with? Find scanpst.exe, double click on it, find your
..pst file (it finds it for you usually) and run it.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to my personal
account will be deleted without reading.
After searching google.groups.com and finding no answer, Barry asked:
| I need help with using the inbox repair.
...3 remote delivery email addresses don't work
I have an Exchange 2000 server. Everything seems to work fine except that
three destinations, i.e., '@company.com' do not go through. After a long
time (sometimes the next day), we get a "Undeliverable: xxx", the following
address could not be reached. But if we send the same message out through a
POP3 mail account then everything is fine. This only happens on 3 specific
destinations (@company.com). When I check SMTP queues in the exchange server
I can see the messages stuck there.
what's the full text of the NDR? have you tried to send a test email from
your ser...hi #3
It would to helpful if anyone can resolve my issue. Firstly, i am a
beginer to exhcange server, so please forgive me if i sound ignorant.
i am trying to configure email account on server B. i am not able to
send mail from any account on server B. I have server A ( exchange
server at site A) and server B ( exchange server at site B ). server A
has email@example.com. And the user is able to send and receive mail,
when this mailbox is on server A. but when i move the mailbox of this
guy to server B, he is not able to send or receive mails. both the
servers , server A and server B are in...CRM 3.0 to CRM 4.0 x64
Based on previous replies - I now got the migration plan ready (I think)
just to get any final feedback...
1) Create a test eviroment that contains 2 machines: a SQL server (32 bit)
and a Web Frontend (32 bit)
2) Copy the 2 CRM DataBases from the SQL production (32 bit) to the test SQL
enviroment (32 bit)
3) Copy the CRM 3.0 Web frontend from the production (32 bit) to the test
WEB Frontend (32 bit)
4) Install CRM 4.0 32 bit on top of the CRM 3.0 32 bit - that way wf,
entities etc. gets upgraded and everything are stored in the Database.
5) View the upgrade log... to see i...networking outlook #3
we're trying to set up outlook on our office server so
that everyone in the office will be able to use the same
calendar. can this be done?
No, Outlook is a client program, not a server program. You need to run
Outlook locally on the client machines and connect to a server (mail server,
not necessarily Exchange) to share mail items. MDaemon and Exchange are
both viable solutions, as are others out there for servers.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact.
After searching google.groups.com and finding no answer:
savannah &l...Error after install Service Pack 2 & 3
I appreciate anyone who can give me help with the following error:
after install Service Pack 2 & 3 "Micrsoft RMS" , Become I can not access to
login Store Operations Manager
The following message appears:
Store Operations Manager
Run-time error '-2147467259 (80004005)':
Subquery returned more than 1 value. This is not permitted when the subquery
follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
-----------------...Can't install Office 2004 for Mac update 11.3.5!
I had a problem yesterday trying to install the 11.3.5 update for
It told me that 'the installer could not locate the correct version of
the software required to install this update'. I am using OS X v.
Is this common?
Can anyone help at all? It would be appreciated.
Then I would try
1. run verify/repair disk permitions from DISK UTILITY
2. to go here:
Download manually the *.dmg file Microsoft Office 2004 for Mac 11.3.5 Update
And followed the instruction given there to install
3. run ve...PO Historical Status
It would be great to have a PO Historical Status report kind of like the
inventory historical stock status.
POs are affected by cancellations, additions, receivings, etc. and there
isn't an easy way to tell when all those things happened to a PO. If a PO is
used for funding which has been recognized as a common use for POP (think
Commitments) then a customer needs to be able to tell the open balance at a
specific point in time like end of fiscal year. As it is right now, I have
to tell them to print and/or dump info in Excel right at year end; however,
they may have some legiti...Bug in CRM 3.0?
We have a client who adjusted the Max Length for the Description field in the
Appointment record. He changed it from the default of 2,000 to 5,000. When
he uses the web client he is able to Save appointments that have 5,000
characters. However, when he goes offline and then tries the same thing he
can enter 5,000 characters and hit save. The Appointment form closes but
there is a hidden error message behind it stating "The length exceeds the max
length of it will be truncated". When you open the record back up instead of
having 5,000 chars, you only have 2,000.
The only t...1.3*2=? & Cost Averages?
Okay a 2 part question...
(1) I would like to disable an employee from entering 1.3 * and scanning an
item...sometimes they do this by accident. Is there a way to disable this?
(2) When entering cost for the first time in a purchase order what happens
is because it was originally $0 it averages that with the cost...throwing the
actual off. Is there a different way to enter the cost in?
Part 1, I'm not sure, but I don't believe you can disable this feature.
Part 2, I tried recreating your error, and when there was a quantity of 1 at
$0 already the...