RDP incoming not working on Server 2003
I have a server running Server 2003 Standard which has been running just fine
for some time but this week a new problem has arisen.
I cannot establish an RDP session with it, no remote system on its subnet
can even make an initial RDP connection at all.
On the server itself, I can RDP out to any PC on the subnet with no problem.
I've also looked all through the Event Logs and there are no errors at all
that have anything to do with this or at the times I've tried to connect from
a remote PC.
I checked over and over to make sure Remote Connections are allowed in My
...Distribution Files for MFC in VS .net 2003
I have an app that was developed under Visual Studio VC++ 6.0 & MFC and
deployed at our customer site.
I have since installed Visual Studio .NET 2003 and rebuilt the application
under the new development environment. I wanted to do a quick test of the
executable and copied it up to a test machine and tried to run it. I got a
series of "unable to find xxx.dll" errors.
I realized that none of the new DLLs were installed on the test machine.
Does anyone have a pointer to a good document on what distribution files are
required? I know about the obvious ones like MFC71.DLL...Exchange 2000 DST Changes
How is one supposed to address the DST changes for Exchange 2000 if
they do not have extended support to get the patch? Will Microsoft be
providing a workaround like they did for Windows 2000?
I'm referencing the following article:
It states :
What to do before you run the Exchange tool
Install DST updates
Before you run the Exchange tool, make sure that client and server
computers are updated correctly with the operating system and
application DST updates. These updates must be installed in the
1. Install the Windows DST upda...Restoring Exchange 2000 cluster to "standard" Exchange 2000 Enterp
At the moment we are creating a "full" test environment built from backup
tapes from our live environment. DC's are all up and running. Our 2000 native
forest exists out of a top domain and 2 child domains. All DC's are running
2000 SP3 as well as the Exchange servers.
Exchange servers are located in the child domains.
In one of the child domains which is NL.top.net we have an Exchange cluster,
2 nodes active/active eg. These would be EX01 and EX02 and running EX04 and
Since we unfortunately do not have a SAN in our test site I will not be able
to do a DR...CRM 3 Exchange Router
My Exchange Router will not forward e-mail to the CRM Server.
We are running CRM 3 with and Exchange 2000 server. Here is the error
messages in the Event Log:
System.Runtime.InteropServices.COMException (0x80040E0E): Bookmark is invalid.
Verifying bef...Controlling multiple TCP connections from Outlook 2003 clients
I've noticed that Outlook 2003 clients can have multiple TCP
connections to the mailbox store on Exchange. As the following web
"This behavior is by design. Outlook can open multiple connections to
parallelize its data communications with the Exchange server. The
actual number of connections will vary according to the version of
Outlook that you're using and the mode in which you're using it. For
Microsoft Office Outlook 2003 in Cached Exchange Mode, you'll see four
connections for the mailbox, ...Outlook 2003: Most messages are moved to junk folder
I am getting a lot of spam recently, at least looking at the numbers of
mails in my junk folder.
However, it turns out that these messages are not spam at all, but just
regular messages (even from the same domain), that should remain in the
regular inbox. Even when I identify a message as 'Not spam', then
subsequent messages from that sender keep popping up in the junk
Obviously I have changed the junk mail settings to 'No automatic
filtering' but Outlook keeps thinking it is smarter than I am.
Any idea? Googled the internet already but couldn't find anoth...Exchange 2003 OWA #6
Exchange 2003 OWA
I would appreciate if someone would be able to help me.
When I'm trying to access Exchange 2003 Server via OWA, I'm getting
error "The folder can't be displayed. You do not have permission to
perform this action" We also running Microsoft ISA Server.
...Exchange 5.5 to 2003 upgrade issue 3
We have upgraded our Exchange 5.5 server to 2003 and moved all the mailboxes
and moved and re-homed the folders following the KB articles.
We turned off the 5.5 services and for a week everything was working fine.
Now for some reason the messages to the main distribution list is being sent
to the old 5.5 server on a x400 protocol.
How can I stop this and assure that the 2003 server is self contained so I
can get rid of this server?
...An Outlook 2003 Problem
I just upgraded from Outlook 97 to Outlook 2003. However, when trying to
reply, forward, and compose with Outlook 2003, I got this error message:
"The messaging interface has returned an unknown error. If the problem
persists, restart Outlook."
The problem persisted. I restarted Outlook 2003, but it didn't help.
Any suggestions? Thanks.
How did you upgrade Outlook 2003 from Outlook 97?
Anyway If you use Hotmail or MSN mail,
check MSKB info below.
You receive a "The messaging interface has returned an unknown error " error message when you try to use Outlook to...Sorting Attendee Lists in Outlook 2003
Is there any way to sort attendees by either name or attendee status in
Outlook 2003? I don't know how Microsoft could be so oblivious to the
need for this feature.
You can't even click on the column headers to sort, let alone print out
a list of people sorted by accept and decline. Microsoft's online help
system recommends Alt + PrntScreen???? How archaic is that?
Is there anyone out there that can help me???
...How to make a Add key disabled after adding one record unless
I have a form where I am adding records. There are two boxes where one has
to put the lineitemnumber and another box where one has to put the
description. Unless the above two boxes are filled in the Add command box
need to be disabled. Now, the problem is after adding one record the Add
button is enabled and I cannot disable it. I would appreciate any help to
The error message is:
The methos is not supported
The following is the code:
Private Sub cmdadd_Click()
On Error GoTo Err_cmdadd_Click
If (IsNull(Me.LineItemID) = True) Or (IsNull(Me.Description) = True) Then
...NNTP move to Exchange?
I'm having a problem with getting a NNTP feed from a
INND 2.2.1 server to Exchange 2003; are there any known
issues here? Has anyone done this type of migration
before? What issues did you encounter?
It seems as if Exchange just wants to pull down a few
of the groups (of which we have over 100 internal) and
even with that, not even pull all of the messages in from
those few groups (it usually gets a few hundred
messages). I'm using the basic NNTP wizards but
everything looks to be configured correctly.
...Exchange Connector Wizard error
I received this error while trying to run this wizard for a generic CRM
user(what role does it have to have?) that would accept all email directly to
CRM. I ran it on a client computer (was this wrong?)
Here is the error, anyway.
"Failed to initialize the rule management subsystem."
What is the correct procedure to run this wizard? I did not find it anywhere.
...copy does not work in word 2003
I can't seem to copy from word 2003. I select text but it won't take it. I
can copy from an e-mail and paste into word, but word doesn't seem to want to
copy, either from one word document to another or into my e-mail. It's been
working fine for almost four years, it just acted up. Any suggestions?
The usual reason is some third party add-in that is messing with the Office
clipboard. If you start Word in Safe Mode, can you copy/paste normally then?
From Start | Run (Winkey+R), type in
and press Enter. Word will start in Safe Mode. Open two doc...OL2003 (Exchange) and OE6 running in the same PC
We are currently upgrading our OS from W98SE to WinXP. Our VP is
using Netscape v4.67 with dial-up to access his personal email from
the ISP and Novell Groupwise for his internal corporate email.
With the new WinXP, he will be authenticate to Active Directory and
using Exchange 2003 (Outlook 2003) for corporate email. (Yep, no more Groupwise!!)
I want to move him away from Netscape to OE6 (built-in with XP pro).
During my test in the lab, for some reasons I can't have OE6 and
OL2003 running at the same time. (I can launch either one but not
both at the same time) He wants OE6 as his...Add new record through Form view
I have a table which is linked to a form, i would like to have a command
button which will add a new record to my table.
On the click of command button it should view the last empty row of my table
in a form.
On Sat, 26 Dec 2009 11:11:01 -0800, Ranjith Kurian
>I have a table which is linked to a form, i would like to have a command
>button which will add a new record to my table.
>On the click of command button it should view the last empty row of my table
>in a form.
The Click event should show [Event Proced...Increasing the Exchange sp2 storage limit
As we all know by now sp2 for Exch2k3 increases the storage limit to 18GB and
can be increased to as much as 75GB for the standard edition. Is this a valid
modification supported by Microsoft or is it a registry hack?
My concern is the release of an Windows update that would nullify the
Read the Release Notes for SP2, it's a valid modification but you need to
insert a registry value to bump it from SP2's default to any size up to 75
Gb. (Some orgs may not want the store to get to that size, so being able to
control it is a good thing, imo).
M...Link and Embed in 2003
Using the Insert>Picture>From File comand we can use either the 'insert' or
'link to file' command to insert a picture. During our development we prefer
to link pictures then when completed save the .ppt with all pictures embedded.
1. When pictures are in slides during design is it possible to tell if the
picture is linked or embedded?
2. Is there a way to embed any/all linked pictures when the slide
presentation is completed without going to each slide and reinserting the
picture as 'insert'
In article <07E6153F-5D...esm shows wrong exchange server version
I have an Exchange 2000 Installation with SP3 + Rollup package 870540-v2 +
Exchange System manager still shows Build 6249.4 SP3.
Should ESM show a higher Build number ?
Thanks for any replies.
IIRC, ESM only shows SP4 on clustered servers that have the update applied
For Exchange news, links, and tips, check:
"MC" <firstname.lastname@example.org> wrote in message
>I have an Exchange 2000 Installation with SP3 + Rollup package 870540-v2 +
...Help! Problem Referencing Excel 2003 in VB.NET
I am using Visual Studio 2008 Express Edition to develop some VB.NET
code that manipulates Excel files. I am developing on a Vista/Excel
2007 machine, but I need the code to work on an XP/2003 machine as
I initially set a reference to the Microsoft Excel 12.0 Object Library
and imported the Microsoft.Office.Interop.Excel namespace. This works
great on the VIsta/Excel 2007 machine, but it does not work on 2003,
which needs the 11.0 library. I get an error that says "Unhandled
Exception . . . Could not file or assembly
'Microsoft.Office.Interop.Excel, Version 12.0.0....Any FREAKIN' way to import DBX files into Outlook 2003
Importing via Outlook | Import from another Program or File
Importing via Outlook | Import Internet Mail and Addresses
Exporting from Outlook Express
Tried Many, many times...
Can Microsucks make this any more complicated...
It's a FREAKIN' DBX file collection
NO - No other Application has it Open.
YES - The Files ARE there
YES - the Internet Account IS there
Yes - I've wasted more of my time IMPORTING into Outlook Express in
VISTA just to RE-EXPORT back to Outlook. What a bunch of freakin'
Another 2 hours wasted - because one Microsoft applica...Exchange Server 2000 Secuirty Setup problems
I have apply wrong setting to our exchange server 2000 . The wrong setting
as from exchange manager . mail store , I have apply everyone send as and
receive as access right, the group included remote access via offline sync.
This setting once apply , all user access other mailbox without apply access
right. I have try disable this setting, after all local office user no
problems, but a remote offline sync laptop user does not work . The error as
below: Unable to display the folder. Microsoft Outlook could not access the
specified folder location. The file C:\exchange\shawnb.ost cannot b...Duplicate Containers in AD after Exchange 2003 Migration
The scenario is:
We migrated from an NT domain to a 2000 domain. Then about a year later we
migrated from exchange 5.5 to exchange 2003. Once the migration was complete,
we discovered that there were duplicate containers and OUs in "Active
Directory Users and Computers" which were empty. For example, when we did the
AD migration we created an OU hierarchy at the root of the domain. After the
exchange migration we found a duplicate hierarchy structure under the Users
container but it didnt actually contain any objects/information that was in
the original OU structure.
We don...Catch all outgoing email on Exchange and send copy to specified account
I have been asked to find out if there is anyway to configure our mail
server to catch all outgoing email from certain email accounts on our
Exchange 2003 Enterprise server and forward a copy of this email to a
specified account, also on the Exchange server.
If anyone could point me in the right direction I'd be grateful.
On 25 Oct 2006 04:10:54 -0700, email@example.com wrote:
>I have been asked to find out if there is anyway to configure our mail
>server to catch all outgoing email from certain email accounts on our
>Exchange 2003 Enterpr...