number rounding in MS Excel
This may have been answered many times.
In MS EXCEL is there a way that it calculates all numbers to 2 decimal
digit accuracy instead of the 15 digit default?
Thanks in advance for the answer.
You can set your decimal places in your cells as 2 and then check Precision
As Displayed on the Tools / Options / Calculation page. Be careful though,
it means what it says!!
"mahusain" <email@example.com> wrote in message
> This may have been answered many times.
> In MS EXCEL is ther...multiple flyers per page?
I need to make a custom template with publisher.
It will be one 8 1/2 by 11 paper divided horizontally into three parts so
that there are three fliers that can be printed. each flier needs to be
double printed so I need to make it a double sided project like a postcard or
brochure layout. I can figure out text and image stuff.
But I don't know how to make a basic custom project that is divided into
three panels horizontally (so 8 inches by 3.83 inches roughly)
Also an additional customization would divide each 3.83 by 8 inch flyer into
two parts so one 8 by 11 page would ...Printing double sided brochures in publisher
I am trying to print a tri-fold double sided brochure in Publisher - my
problem is that the 2nd page prints upside down - how do you get both sides
of the brochure to be printed the same direction?
> I am trying to print a tri-fold double sided brochure in Publisher - my
> problem is that the 2nd page prints upside down - how do you get both sides
> of the brochure to be printed the same direction?
If you're manually duplexing: Rotate the second page through 180° before
reinserting it into the printer.
If you're auto-duplexing: Change the options on ...incorrect check / cheque number printing
When generating a cheque run, let’s say cheque 61, 62, 63 and 64, the
information printed on cheque # 62 is actually cheque # 64 and vice versa.
This does not happen every cheque run, but it does happen fairly often.
I have not seen GP do this. What version and service pack of GP are you
using? Are you 100% sure the check stock itself is not out of sequence? Do
you have any customizations?
Dynamics GP MVP
Flexible Solutions, Inc.
"Syed" <Syed@discussions.microsoft.com> wrote in message
...printing 2 charts on single page
Using Excel 2k, Win 2k
I was trying to print to line charts on a single page to demonstrate the
corelation between the two data sets.
I would like to print in portait mode with one chart on top of page and one
on bottom. Excel only seems to offer putting chart 2 on a separate page or
embedding it in chart one.
I am not very familiar with excel charting capabilites can anyone suggest a
...SpreadSheetML (XML for Excel)
A client of mine has Office X for Mac. I am wondering if this edition
of Excel supports SpreadSheetML. I have heard that it also support the
new Open XML formats (same as Office 11). Does anyone know if either of
these statements is accurate?
Thanks in advance,
I believe that both statements are wrong.
The XML converter for Office Next on the Mac has not yet been developed.
It's not likely to come until after the PC Office team ships their product
to retail -- until they stop CHANGING the thing :-)
My guess is that the converter won't appear until sometime...Public Folder link to Excel File
I have a user that claims that he had a shortcut to a spreadsheet "in
his public folders" at his old job. Obviously, he's an end user that
may or may not know what he's talking about.... I'm trying to figure
out the best way to accomodate him.
He basically wants an Excel file stored on a shared folder to be
available to all user as either a shortcut, or a link in the public
folders (can't post to a folder as he will be updating the sheet
regularly). When a user clicks on the shortcut/link, it would just
launch Excel and display the file.
Anybody have any ideas...Filters in Excel 2003
I am using Filters in Excel 2003.
Every cell in sheet B is linked to every cell in sheet A. That way I
can alter data in B without corrupting the original data in A. I then
highlight the cells in B that I want to assign a filter to and select
Advanced Filter. I have no criteria so I do not set that. I click OK.
I then select Filter again and this time select Auto Filter. Drop
down arrows appear at the top of my columns. Great, no problems so
far, I then select from the drop down list the criteria that I want to
filter. Again no problems, my list filters correctly.
But once I have do...Excel Opens Without Displaying Workbook
I am having issues with opening an Excel file. The file opens, but the workbook is not displayed. I tried the resolution in the article XL97: Excel Opens Without Displaying Workbook (http://support.microsoft.com/default.aspx?scid=kb;en-us;158996&Product=xlw97), but neither of the resolutions fixed the problem. Any suggestions??
Are you using Excel 97?
Fort Collins, CO
>I am having issues with opening an Excel file. The file
opens, but the workbook is not displayed. I tried the
resolution in the article XL97: Excel Opens Without
Di...Page setup for 8.5x11 calendar w/picture on tabloid paper?
How can I set up a calendar with 8.5x11 (landscape) pages with pictures for
each month to print on tabloid (11x17) paper so it can be saddle stiched? I
would like the picture on the top half and calendar on the bottom half. I
keep ending up with two of the same pictures on one page and two calendars
on the next page. Thanks, Bob
I assume you are taking this to a professional printer so why not just set
each page up as a landscape 8� x 11 and let your printer do the rest?
MVP Microsoft [Publisher]
"Bob at 4799" <Bob at firstname.lastname@example.org>...Comments to print on invoices and packing lists
We have a client with a specific need for printing customer comments
and item comments:
1) They want to store comments on Customer Master. When a sales order
is entered these comments should default on the sales order with an
option to change. They want to mark these comments to be printed on
sales order, invoice, packing list and pick ticket.
2) Items are stored with item specific comments. These comments need
to come to the sales order when the order is entered with an option to
change. They want to setup comments with similar setup where they
print on order, invoice, pick ticket and packi...View original Excel after saving over it
In error, i hit save instead of save as. I'd like to view the original
documents contents. is this at all possible. i use windows xp. excel 2003
Not very likely.
Try a Google search action if you haven't already, but I think it's
This underscores the importance of backups.
http://www.wimgielis.be = Excel/VBA, soccer and music
> In error, i hit save instead of save as. I'd like to view the original
> documents contents. is this at all possible. i use windows xp. excel 2003
In article <C2A3F0E7-24E0-43A5-809A-ECA719...printing imported gif files in Excel
When printing gif file with transparent background on the
grey(25%) background of Excel non-transparent part of the
picture has white border around it. Is there any way to
Thank you in advance...
I am working on a spreadsheet for work where it will calculate commissions to
be earned based on my sales. There is a table that I have to use to determine
what the percentage would be, how would I write an equation for that. For
example, the equation would have to say: if say D3 was = or < than %, use
cell# whatever and then have a sum in there. The table is on another sheet in
the document so that would have to be there too.
Basically, the way that my commissions are calculated is that we have to
take what I sold in any given month and find out what percentage of my yearly
plan i...Some Excel formatting functions taking a long time to work #2
Excel 2000 SP3
When I use some formatting functions for the first time in a
session, such as bold, increasing font size etc, it takes up to 30
seconds to work. Meantime Excel is locked up until it completes that
formatting call. I suspect faulty DLL?
Has anyone experienced this? How to fix (other than a complete re-
Any advice appreciated.
On Nov 5, 8:39=A0am, Piri <wiremu.pare...@hotmail.com> wrote:
> Excel 2000 SP3
> When I use some formatting functions for the first time in a
> session, such as bold, increasing font size etc, it takes =A0up to 30
> secon...printing multiple copies of Sigel GmbH
I have made a tent card in a small size of 5.588cm x 4.191cm for a swing tag,
using Sigel GmbH in the "other labels" section. It prints one copy
perfectly, leaving room on the page for at least about another 5 copies
(which is what I want), but when in the print page section it doesn't give me
the option to print multiple copies on the page. This will be an enormous
waste of paper if I have to print the number of copies individually on each
What is the product number for this label? I cannot find this size label on my
Mary Sau...How to save Japanese characters in CSV format of Excel ?
I would like to know, how to save the Doubly-Byte characters.For example,
Japanese in CSV of Excel.Here are the steps, I tried.
1. Open Excel
2. Copy pasted the Japanese charactesrs in a cell.It is displaying the
3. Save as CSV(Comma seperated file)
It is saving as ??????.
Thanks in advance for the info.
...Symbol Updating Only Every Few Days (if at all)
Using Money 2006, and have a symbol "VLO" that is only updating every few
days. This stock was a duplicate (downloaded transaction created a new
version of the same stock - my fault not clicking correct choice when asked).
I've removed the symbol from the stock entry that was downloaded, renamed
this entry to something bogus, deleting this renamed stock "from all
accounts", then added the symbol back to the original VLO stock that I've
been tracking for years.
Now the stock just says "unch" in the portfolio view, and the price history
is only updat...Macro
I need a macro that help me to transfer name and address information from an
specific table in excel to a template in words on specific areas and then
print the word document.
The reason for this is that i need to create diferents letters to be sent to
the customers from the excel table.
Example of the table is:
soc seg, customer name, child name, customer code, add 1 , add2, city,
estate, zip code. all this information will be paste on word letter template
on specific areas or fields.
IMHO the best approach would be to set up a mail merge documen...Calculating totals
I have two columns on a worksheet: "Project Codes" and "Totals." I would
like to have columns on another worksheet that will automatically total up
the different project numbers "A,B,C,etc." How do I do that?
Thanks in advance for your help,
Enter a *unique* list of your "Project Codes", starting in A2 of Sheet2.
In B2, enter this formula:
And copy down as needed.
Please keep all correspondence within the G...Excel fun patch
Excel fun patch, have you see it?
Sometimes when I receive excel attachments in my email (outlook 2003) they
have a row height of 409.5 when I open them. I have to highlight the whole
sheet and change the row height before I am able to view the data. This does
not happen all the time and not from any particular person. I can forward
the email to another machine with excel 2003 and they open it with no
problem. I have downloaded all the patches and updates that I can find and
still no help. This is just an annoying quirk that is driving me nuts. Does
anyone have any ideas? TIA
How about a couple of silly guesses that might t...total group & max function
I am using Access 2003
I created a Db for Machine Mtce. The table consists of 3 tables, (1) Basic
Mach Infor (ie Mach#, Mach Name, Mfg etc) - (2) Operations Table - consists
of different prev mtce (PM) that need to be completed at various time frames.
Ex: "Mach 100" could have 3 different operations; Oper # 100A to change the
oil due every 90 days, Oper # 100B to check the belts due every 180 days,
Oper # 100C to grease the machine due every 365 days.
The 3rd table is the "PM History" table which includes the history of all of
the PM's completed with Work Order...Need macro help to close excel
I have created a button in Access2000 that opens an Excel Spreadsheet. What
I need now is assit in closing excel upon completion. I can get an excel
macro to save my file and close the worksheet, but it is not closing excel
entirely. I'm on project with this employer and could use a response today
to fix this before I leave. Thanks much to any and all. My macro is as
' SaveClose Macro
' Macro recorded 9/27/2004 by cdjohnso
' Keyboard Shortcut: Ctrl+Shift+C
ActiveWorkb...Excel Text Function (Right, Left)
My sheet has columns like this
1. 63mmx 4kg
2. 75mmx 4kg SWR
How can i detect that if a1:a2 is right,3 "swr", that it should be returned
3 otherwise 6.
How can i add =right function with conditional formula.
Rao Ratan singh
fill down your column (move cursor over bottom right hand corner of the cell
when you see a +, double click)
check out www.hcts.net.au/tipsandtricks.htm
....well i'm working on it anyway
"Rao Ratan Singh" <RaoRatanSingh@discussions.microsoft.com> wrote in message