Smart List problem
I recently re-installed a client (version 9.0). Everything went fine but when
we tried to open Smartlist on this client we got an error message telling us
that “To use Smartlist capability in this product the Smartlist tables must
be built. This is one time initialization process and may take a few minutes”.
I answered yes, it ran and then returned the following error “number of
columns does not match table definitions”.
Every other machine is working fine, is the tables it is talking about
building on the client? It does not seem like that should be so. It does not
matter ...Problem with systemstate backup with DPM 2010
We running DPM 2010RC on a Windows 2008 R2
The Protected computer is:
Microsoft(R) Windows(R) Server 2003, Standard Edition
5.2.3790 Service Pack 2 Build 3790
When we installed the DPM agent the first backup of system state was
successfully, so we have one restore point. But further backups in failing,
the system state backup is in status “replica is inconsistent” and when I
running a consistent check the job failing.
In the error in DPM is:
The replica of System Protection Computer\System Protection on
sea0700smon1.xxxx.local is inconsistent with the protected data so...Questiontest-outlookwebservices problem
hi all and thanks for the support.
i'm facing a problem with test.outlookwebservices.
notice that oulook side everything seems to be pretty good: the
autodiscovery and auto-configuration of the account succeedes, the test email
autoconfiguration suceedes too.
when i launch the test, once it suceedes for certain services and after a
while it fails for those services and suceedes for other.
look the prints:
here are failing the RPC tests
Message : [EXCH] The UM is configured for this user in the AutoDiscover
response received from https://mytest-EXC1.
myt...Problem when switching datasource
Help please :)
I have created an excel report, that retrieves its data from a view. From
that data i have created several sheets with different pivottables. The view
is based per country, so each country has to connect to their own view. So I
use the same file and change the datasource. It looks fine when i have
updated. BUT when I use the dropdown on a field, the old values from the
last data are still visible, however they dont show anything if you choose
them. For example France has sales men a +b and Sweden c+d. when switching
datasource from france to sweden, only c+d should be visible i...Fewer normal template problems with Word 2000 or 2002?
I have enjoyed some things about Word 2007, but I keep having problems
with macros and templates. I am wondering if (a) macros increase the
likelihood of corrupting the normal template in 2007, or (b) if the
older versions of Word had as many template problems. I have used Word
in 2000, with Office 2003, and now with Office 2007 and I don't ever
recall having as many problems as I've had with 2007.
What I'm thinking is that if it is simply a macro problem causing
corruption, I would simply use 2007 without the macros (they're nice
but I can live without them). On the...Font problem
It seems that the Cambria Math font has recently acquired an extremely large
Ascent and Descent. Has it perhaps always been that way and I've never
noticed it before, or is it something recent, perhaps a Vista thing? Try the
following code for example. For Arial and Times New Roman (and virtually all
other fonts) I am getting pretty much exactly what I would expect (a
TextHeight that is a bit larger than the point size) but for Cambria Math I
am getting an extremely large TextHeight (I get exactly the same results
using GDI32 methods). At this end (on my Vista Business laptop...08 Mac Office activation problems
Operating System: Mac OS X 10.5 (Leopard)
Just found an article posted by michellec and I am faced with exactly the same problem - on 'activation' of the product, none of the 3 product keys seem to be correct, hence activation is unsuccessful!! Have received some help emails (and thanks Diana yours had the microsoft help number that has been good, despite the fact they can't help me and tell me I must get in touch with Digital River) but seems that what I need is another product key, and now that I'm asking for that since about 10 days, I don't get any reply ...Problems with loading xml from XmlTextWriter
I use an XmlTextWriter to generate xml data.
The declaration is:
System.Text.StringBuilder sb = new System.Text.StringBuilder();
System.IO.StringWriter sw = new System.IO.StringWriter(sb);
XmlTextWriter w = new XmlTextWriter(sw);
And I write to it using
When the creation is done, I need to load it into DOM to select an
XmlNode or an XmlElement to apply to another method (which I cannot
I thought I could do it with:
XmlDocument xDoc = new XmlDocument();
XmlNode node = xDoc.SelectSingleNode(&...Autofilter and FREQUENCY
I have this FREQUENCY formula in my srpeadsheet:
If I autofilter the list, the formular will still display the results of all
rows. Is there away to get FREQUENCY only to count Filtered Rows? Or can the
same result be achieved any other way.
I thought of combining with the SUMPRODUCT() function, but as the arrays are
not identical in siz, this will not work.
(there's no email, no snail mail, but somewhere should be gmail ...Problem access variable in On Format
I'm using Access via Office XP Pro.
I am trying to format the Zip Code on the detail line of my report.
I have tried the following lines of code in both the On Format event and the
On Print event:
If len([PostalCode]) > 5 Then
if len(Me.PostalCode) > 5 Then
In both events and either code, I receive the error message:
Access can't find the field 'PostalCode' referred to in your expression.
If I put "PostalCode" as the source of the report's control...Autoshapes' visible problem
When I add some Rectangle autoshapes above the embeded chart, I find
it's hard to control it's visibility, They maybe hide when I select
some cell or activate chart. I want to know how to make them always
visible no matter what I select.
Thank you in advance! ^_^
You need to click on the chart before you use the drawing tool. In this way
the Shape and the Chart become one.
Bernard V Liengme
remove caps from email
"fujing1003" <firstname.lastname@example.org> wrote in message
news:1171358292.074278.135950@v33g2000cwv...Problem inserting delta symbol into Excel
Hello. I recently posted a question related to the issue of
putting a mu (=B5) symbol into MS Excel charts. Someone kindly
suggested using the Alt-numeric code (alt-0181) to place this symbol
into the spreadsheet cell which then showed up nicely in the chart.
However, when I try to do this same operation using alt+ NumPad 68
(susposed to give the delta symbol), all I get is a capital D. What
gives? Why does one symbol work and not the other? I even
downloaded the program QuickKeys from SourceForge.net and this still
did not solve the problem. Any ideas??
Thank you....Office 2004 SP 11.1.0 installation problems
I'm trying to update Office 2004 on my brand new iBook. I installed
Office 2004 from the CD without incident. Then I downloaded SP 188.8.131.52
and 11.1.0 (which according to the MS website is to be installed 1st.)
When I try to install, I received a message, "An error prevented the
update from completing 11002:2,-14" The "Read Me" file indicates
several potential explainatins/solutions none of whice are relevant
except for uninstalling Office and then reinstalling it. I tried
dragging the Office folder to the trash and reinstalled and am having
the same problem. I've t...RMS and/or PC Charge Problems
We are having some interesting problems with our RMS system and PC Charge:
For no apparent reason RMS will have an error message after a card is swiped
or keyed into the system:
• DENIED (With a wide variety of error messages)
• DUPLICATE use F+ to force (even when it is the first transaction)
• TIMED OUT
• Turned modem off and on
• Disconnected the modem and plugged everything back in
• Turned the server on/off
• Called PC Charge only to be told that it is RMS
• RMS said it is PC Charge
• Confirmed that everything is set up properly in PC Charge and RMS
What works:...Excel deleting xml item problem
I have an excel macro (in an add-in) that is called by the main excel macro
that is deleting various items in an xml file
When it gets to the last line as below it generates the following message
“An unhandled error occurred: Object variable or with block not set”
the variable is dimensioned see Dim statement that I have copied here. This
has worked for some time with no problem but suddenly out of the blue
generates this error. I have tried replacing the xml file with a copy, also
tried replacing the add-in with a copy (in case either have been corrupted).
The error desc...Other problem with recent update that locks you out without product key
Operating System: Mac OS X 10.5 (Leopard)
I can't get into my Office anymore either until I locate my product key, but I'm also finding that I'm getting a sound stutter when I watch movies online with Netflix. This wasn't happening before the download and I don't get the stutter when I switch to Windows operating system. Is anyone else having this trouble and have you been able to fix it? Thanks.
Hey !! I can't get into my Office anymore either until I locate my product key because on my mac, download updates come through automatically.
...Dialog based problem in vc6
I am writing an mfc project in vs6 and I have a problem!
When I add radio button to my dialog based application and run the
application and press that button my application hang, even when I try to
run it in the test mode inside visual studio and press that radio button it
stack the all environment why??
It append only if I add a radio button for a regular button its all ok!
I install sp-6 but it didn't solve the problem.
"Dave" <email@example.com> wrote in message
> I am writing an mfc project in ...Problem with Outlook error message
Hi everyone -
I just started having problems in Outlook 2003 after uninstalling
Mozilla Firefox broswer. Every time I try to open a URL in an Outlook
message I get the following error message:
"This operation has been cancelled due to restirctions in effect on
this computer. Please contact your system administrator."
Any way to get rid of this? I've already changed all *.htm and *.html
associations to IE.
Thanks for your help!!!
> Hi everyone -
> I just started having problems in Outlook 2003 after uninstalling
> Mozilla Firefox broswer. Every...Outlook 2003 Signature Problem
I've created a signature with my company logo (.jpg file) using Outlook
2003. When the signature is attached in my email, the photo/icon file shows
a box with an 'x' in place of the .jpg file. I checked the location where
the files are stored and I found the .jpg file in the proper folder under
Thanks in advance for your help.
Tools - options -security tab, click on change automatic download settings.
Change to what you want.
"Mikeul" <Mikeul@hotmail.com> wrote in message
news:firstname.lastname@example.org......Problem in restricting users from sending/receving internet email
I have found a helpful articel here:
I read it through couple times but I would like to ask some questions
before I start the work on our Exchange 2000 server.
1. The "group" I am going to create for adding users into the
restricting list, will it be a Security group or Distribution group?
What group scope should I give it?
2. Under the section of "Restricting Users from Sending Internet Base
Email", the article tells us to create a *new* SMTP connector and add
the group into the "Dilivery Restriction" page.
Will ...Hyperlink Problem #6
Maybe someone can help me with a hyperlink problem we have.
We have an index spreadsheet with links to all our main documents etc. These
documents can be Pdfs, gifs Jpegs etc. I would have expected that when you
click on the hyperlink the document would open with the program associated
with the file type.
On my particular box, the image file ( gif, jpeg) open in internet explorer
although the association to the file should use irfranview, on other machine
the file opens in Irfranview.
I am not understanding why the file should open in different programs
although the file associa...Outlook Draft Email Print Problem
I have emails saved in draft but when i go to print them
it doesnt show who it is being sent to and the fact it
hasnt been sent yet, i have played with the setting but to
no avail. I am using outlook 2003 any help would be
Turn off WordMail before printing the draft (Tools | Options | Mail Format)
or wait to print until after you send it.
Sue Mosher, Outlook MVP
Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
<email@example.com> wrote in message
news:...Custom toolbar problem
I'm using Outlook 2000 under terminal services.
when i customise my toolbars with my own buttons that use macros i find
that when i exit then open outlook again its reset itself to default
I tried the whole reseting of the outcmd.dat file but that doesn't
help, it keeps reseting back to default after i exit.
Is there another way to fix this?, muchly appreciated for any help.
Under TS the settings and changes are kept on the server and you probably
don't have write access to the underlying files such as outcmd.dat. Your
changes will persist only until that Outlook se...Outlook 2002 HTML printing problem
Outlook 2002. I cannot print HTML emails. Plain text
prints without any problems just HTML will not. Office xp
pro is at all latest service packs. Anyone have an idea
what may be wrong?
...Exchange 5.5 email problem
I have an Active Directory network with an Exchange 5.5 server running on a
Windows NT box.
I am hosting 3 email domains on that box. For example lets call them
mydomain1.com, mydomain2.com and mydomain3.com.
All external emails come in and work just fine except for the mydomain3.com
emails. My internal Active Dirctory domain is mydomain3.com.
Currently my Exchange server on the NT box is pointing at the internal DNS
server that forwards requests to the outside. I was thinking my problem is
that and that I might need to have the NT box with Exchange on it use our
ISP DNS servers instead.